path: root/sh/openrc-run.sh.in

#!@SHELL@
# Shell wrapper for openrc-run

# Copyright (c) 2007-2009 Roy Marples <roy@marples.name>
# Released under the 2-clause BSD license.

verify_boot()
{
	if [ ! -e ${RC_SVCDIR}/softlevel ]; then
		eerror "You are attempting to run an openrc service on a"
		eerror "system which openrc did not boot."
		eerror "You may be inside a chroot or you may have used"
		eerror "another initialization system to boot this system."
		eerror "In this situation, you will get unpredictable results!"
		eerror
		eerror "If you really want to do this, issue the following command:"
		eerror "touch ${RC_SVCDIR}/softlevel"
		exit 1
	fi
	return 0
}

sourcex()
{
	if [ "$1" = "-e" ]; then
		shift
		[ -e "$1" ] || return 1
	fi
	if ! . "$1"; then
		eerror "$RC_SVCNAME: error loading $1"
		exit 1
	fi
}

sourcex "@LIBEXECDIR@/sh/functions.sh"
sourcex "@LIBEXECDIR@/sh/rc-functions.sh"
case $RC_SYS in
	PREFIX|SYSTEMD-NSPAWN) ;;
	*) sourcex -e "@LIBEXECDIR@/sh/rc-cgroup.sh";;
esac

# Support LiveCD foo
if sourcex -e "/sbin/livecd-functions.sh"; then
	livecd_read_commandline
fi

if [ -z "$1" -o -z "$2" ]; then
	eerror "$RC_SVCNAME: not enough arguments"
	exit 1
fi

# So daemons know where to recall us if needed
RC_SERVICE="$1" ; export RC_SERVICE
shift

# Compat
SVCNAME=$RC_SVCNAME ; export SVCNAME

# Dependency function
config() {
	[ -n "$*" ] && echo "config $*"
}
need() {
	[ -n "$*" ] && echo "need $*"
}
use() {
	[ -n "$*" ] && echo "use $*"
}
want() {
	[ -n "$*" ] && echo "want $*"
}
before() {
	[ -n "$*" ] && echo "before $*"
}
after() {
	[ -n "$*" ] && echo "after $*"
}
provide() {
	[ -n "$*" ] && echo "provide $*"
}
keyword() {
	[ -n "$*" ] && echo "keyword $*"
}

# Describe the init script to the user
describe()
{
	if [ -n "$description" ]; then
		einfo "$description"
	else
		ewarn "No description for $RC_SVCNAME"
	fi

	local svc= desc=
	for svc in ${extra_commands:-$opts} $extra_started_commands \
		$extra_stopped_commands; do
		eval desc=\$description_$svc
		if [ -n "$desc" ]; then
			einfo "$HILITE$svc$NORMAL: $desc"
		else
			ewarn "$HILITE$svc$NORMAL: no description"
		fi
	done
}

# Report status
_status()
{
	if service_stopping; then
		ewarn "status: stopping"
		return 4
	elif service_starting; then
		ewarn "status: starting"
		return 8
	elif service_inactive; then
		ewarn "status: inactive"
		return 16
	elif service_started; then
		if service_crashed; then
			eerror "status: crashed"
			return 32
		fi
		einfo "status: started"
		return 0
	else
		einfo "status: stopped"
		return 3
	fi
}

# Template start / stop / status functions
# These functions select the appropriate function to call from the
# supervisor modules
start()
{
	local func=ssd_start
	case "$supervisor" in
		s6) func=s6_start ;;
		?*)
			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
			;;
	esac
	$func
}

stop()
{
	local func=ssd_stop
	case "$supervisor" in
		s6) func=s6_stop ;;
		?*)
			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
			;;
	esac
	$func
}

status()
{
	local func=ssd_status
	case "$supervisor" in
		s6) func=s6_status ;;
		?*)
			ewarn "Invalid supervisor, \"$supervisor\", using start-stop-daemon"
			;;
	esac
	$func
}

yesno $RC_DEBUG && set -x

_conf_d=${RC_SERVICE%/*}/../conf.d
# If we're net.eth0 or openvpn.work then load net or openvpn config
_c=${RC_SVCNAME%%.*}
if [ -n "$_c" -a "$_c" != "$RC_SVCNAME" ]; then
	if ! sourcex -e "$_conf_d/$_c.$RC_RUNLEVEL"; then
		sourcex -e "$_conf_d/$_c"
	fi
fi
unset _c

# Overlay with our specific config
if ! sourcex -e "$_conf_d/$RC_SVCNAME.$RC_RUNLEVEL"; then
	sourcex -e "$_conf_d/$RC_SVCNAME"
fi
unset _conf_d

# Load any system overrides
sourcex -e "@SYSCONFDIR@/rc.conf"
if [ -d "@SYSCONFDIR@/rc.conf.d" ]; then
	for _f in "@SYSCONFDIR@"/rc.conf.d/*.conf; do
		sourcex -e "$_f"
	done
fi


# load service supervisor functions
sourcex "@LIBEXECDIR@/sh/s6.sh"
sourcex "@LIBEXECDIR@/sh/start-stop-daemon.sh"

# Set verbose mode
if yesno "${rc_verbose:-$RC_VERBOSE}"; then
	EINFO_VERBOSE=yes
	export EINFO_VERBOSE
fi

for _cmd; do
	if [ "$_cmd" != status -a "$_cmd" != describe ]; then
		# Apply any ulimit defined
		[ -n "${rc_ulimit:-$RC_ULIMIT}" ] && \
			ulimit ${rc_ulimit:-$RC_ULIMIT}
		# Apply cgroups settings if defined
		if [ "$(command -v cgroup_add_service)" = \
		    "cgroup_add_service" ]
		then
			if [ -d /sys/fs/cgroup -a ! -w /sys/fs/cgroup ]; then
				eerror "No permission to apply cgroup settings"
				break
			fi
			cgroup_add_service /sys/fs/cgroup/openrc
			cgroup_add_service /sys/fs/cgroup/systemd/system
		fi
		[ "$(command -v cgroup_set_limits)" = \
		    "cgroup_set_limits" ] && \
		    cgroup_set_limits
		break
	fi
done
 
# Load our script
sourcex "$RC_SERVICE"

eval "printf '%s\n' $required_dirs" | while read _d; do
	if [ -n "$_d" ] && [ ! -d "$_d" ]; then
		eerror "$RC_SVCNAME: \`$_d' is not a directory"
		exit 1
	fi
done
[ $? -ne 0 ] && exit 1
unset _d

eval "printf '%s\n' $required_files" | while read _f; do
	if [ -n "$_f" ] && [ ! -r "$_f" ]; then
		eerror "$RC_SVCNAME: \`$_f' is not readable"
		exit 1
	fi
done
[ $? -ne 0 ] && exit 1
unset _f

if [ -n "$opts" ]; then
		ewarn "Use of the opts variable is deprecated and will be"
		ewarn "removed in the future."
		ewarn "Please use extra_commands, extra_started_commands or extra_stopped_commands."
fi

while [ -n "$1" ]; do
	# Special case depend
	if [ "$1" = depend ]; then
		shift

		# Enter the dir of the init script to fix the globbing
		# bug 412677
		cd ${RC_SERVICE%/*}
		_depend
		cd /
		continue
	fi
	# See if we have the required function and run it
	for _cmd in describe start stop status ${extra_commands:-$opts} \
		$extra_started_commands $extra_stopped_commands
	do
		if [ "$_cmd" = "$1" ]; then
			if [ "$(command -v "$1")" = "$1" ]; then
				# If we're in the background, we may wish to
				# fake some commands. We do this so we can
				# "start" ourselves from inactive which then
				# triggers other services to start which
				# depend on us.
				# A good example of this is openvpn.
				if yesno $IN_BACKGROUND; then
					for _cmd in $in_background_fake; do
						if [ "$_cmd" = "$1" ]; then
							shift
							continue 3
						fi
					done
				fi
				# Check to see if we need to be started before
				# we can run this command
				for _cmd in $extra_started_commands; do
					if [ "$_cmd" = "$1" ]; then
						if verify_boot && ! service_started; then
							eerror "$RC_SVCNAME: cannot \`$1' as it has not been started"
							exit 1
						fi
					fi
				done
				# Check to see if we need to be stopped before
				# we can run this command
				for _cmd in $extra_stopped_commands; do
					if [ "$_cmd" = "$1" ]; then
						if verify_boot && ! service_stopped; then
							eerror "$RC_SVCNAME: cannot \`$1' as it has not been stopped"
							exit 1
						fi
					fi
				done
				unset _cmd
				case $1 in
						start|stop|status) verify_boot;;
				esac
				if [ "$(command -v "$1_pre")" = "$1_pre" ]
				then
					"$1"_pre || exit $?
				fi
				"$1" || exit $?
				if [ "$(command -v "$1_post")" = "$1_post" ]
				then
					"$1"_post || exit $?
				fi
				[ "$(command -v cgroup_cleanup)" = "cgroup_cleanup" -a \
				"$1" = "stop" ] && \
				yesno "${rc_cgroup_cleanup}" && \
					cgroup_cleanup
				shift
				continue 2
			else
				if [ "$_cmd" = "start" -o "$_cmd" = "stop" ]
				then
					shift
					continue 2
				else
					eerror "$RC_SVCNAME: function \`$1' defined but does not exist"
					exit 1
				fi
			fi
		fi
	done
	eerror "$RC_SVCNAME: unknown function \`$1'"
	exit 1
done

exit 0