aboutsummaryrefslogtreecommitdiff
path: root/sh/tmpfiles.sh.in
AgeCommit message (Collapse)Author
2016-12-01split tmpfiles processing into opentmpfilesWilliam Hubbs
The openntmpfiles package is designed so that it can be used on systems independently of whether openrc is used.
2016-07-26tmpfiles.sh: Support lines with q Q h HMartin Väth
btrfs support is not implemented yet (for q Q v), but at least tmpfiles.sh no longer chokes about tmpfiles.d lines of recent systemd versions This fixes #87.
2016-07-25tmpfiles: Accept filenames as command line argumentsMike Gilbert
This brings us closer to being able to use tmpfiles.sh as a full replacement for systemd-tmpfiles. This closes #83.
2016-07-25tmpfiles: Process command line before gathering config filesMike Gilbert
This is part of #83.
2016-07-25tmpfiles: Make unrecognized options fatalMike Gilbert
This is part of #83.
2015-08-03tmpfiles: run restorecon on the entire pathJason Zaman
The tmpfiles "d" entry will create a full path and only the last dir in the path will have its SELinux label set correctly. This patch will restorecon the parents as well so that the selinux labels are correct. eg, "d /run/libvirt/lxc", then "lxc" would have the correct SELinux label but "libvirt" would not. Signed-off-by: Jason Zaman <jason@perfinion.com>
2015-06-24tmpfiles: Recognize type 'v' (create btrfs subvol)Mike Gilbert
This change does NOT implement btrfs subvol creation. Instead, it treats 'v' the same as 'd', which is an acceptable fallback according to the manual. Fixes #58
2015-06-24Remove execute bit from tmpfiles.sh.inMike Gilbert
2015-04-08Fix tmpfiles processingWilliam Hubbs
Tmpfiles.d processing had /run overriding /usr/lib and /etc, but this is not correct. The correct order, from lowest to highest, for tmpfiles processing is: * /usr/lib/tmpfiles.d/*.conf * /run/tmpfiles.d/*.conf * /etc/tmpfiles.d This means /run/tmpfiles.d/*.conf can override /etc/tmpfiles.d/*.conf, but /etc/tmpfiles.d/*.conf can override both of them. This fixes #49.
2014-08-27tmpfiles.sh: add support for C actionAndrew Gregory
Recursively copies files or directories. Added by systemd in 849958d1.
2014-08-27tmpfiles.sh: add support for + modifierAndrew Gregory
systemd added support for b+, c+, p+, and L+ in 2e78fa79 and 1554afae to remove the target path if it already exists.
2014-08-13tmpfiles: fix relabel to run restorecon before chown and chmodWilliam Hubbs
2014-08-13tmpfiles: Move relabelling before any other calls for device nodesJason Zaman
Device nodes are normally never device_t so this type does not have many permissions. After the mknod, the device should have its label corrected before any other operations (like chmod).
2014-08-07tmpfiles.sh: do not use installJason Zaman
install is in /usr which causes problems if /usr is not mounted. Instead, checkpath and "mkdir -p" can do everything required and are both available before /usr is mounted. Since checkpath also handles selinux labels correctly, _restorecon after is not required. X-Gentoo-Bug: 503408 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=503408
2014-07-16tmpfiles: set the proper SELinux contextJason Zaman
Restore the label on the created file / dir based on the policy fcontexts. X-Gentoo-Bug: 516956 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-06-20tmpfiles.sh: fix comment processingWilliam Hubbs
If you happened to format a comment with no white space after the '#', it was not being processed. Reported-by: consus@gmx.com X-Gentoo-Bug: 511804 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=511804
2014-06-20sh/tmpfiles.sh: license under 2-clause BSDRobin H. Johnson
As the author of our tmpfiles.sh script, I hereby license it under 2-clause BSD, like the rest of openrc. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2014-03-27tmpfiles: add support for --boot optionAndrew Gregory
For compatibility with systemd-tmpfiles. Fixes #17 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-03-27tmpfiles: ignore all files starting with systemd-Andrew Gregory
systemd recently moved creation of /run/nologin to systemd-nologin.conf Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-12-10tmpfiles.sh: small fixesWilliam Hubbs
Change "sort | uniq" to "sort -u". Also, change `...` to $(...). X-Gentoo-Bug: 493736 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493736
2013-07-27tmpfiles: do not signal an error if device nodes already existDirk Sondermann
X-Gentoo-Bug: 478336 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=478336
2013-07-25tmpfiles: add --prefix and --exclude-prefix optionsWilliam Hubbs
2013-07-23tmpfiles: make b and c commands set ownership and permissionsWilliam Hubbs
The b and c commands in tmpfiles.sh were not setting ownership and permissions for the device nodes.
2013-07-16typo fixHank Leininger
X-Gentoo-Bug: 477006 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477006
2013-03-11tmpfiles: add support for the new X line typeWilliam Hubbs
tmpfiles now has a new line type, X, which is similar to the x line type used by the cleanup function. This is not supported yet by OpenRc, because we do not have the cleanup function in tmpfiles.sh, so I have added a dummy procedure for it so we don't get complaints about this line type. Reported-by: mgorny@gentoo.org X-Gentoo-Bug: 460880 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460880
2012-11-06tmpfiles: fix bashismWilliam Hubbs
reported-by: <pesa@gentoo.org>
2012-11-05tmpfilesd: Doing both create+remove at the same time is valid.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-10-21tmpfilesd: parse arguments with spacesAndrew Gregory
systemd allows the final arg in tmpfiles to contain spaces. Using the read() call to set the variables includes all trailing components in $arg so it doesn't get cut off. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2012-10-21tmpfiles: return success from _f/_F on empty $argAndrew Gregory
'[ -n "$arg" ] && _w' causes _f/_F to return the failure from the test when $arg is empty. Inverting the test causes the test and _f/_F to return success. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2012-10-21tmpfiles: do not process systemd.confWilliam Hubbs
This file contains definitions specific to systemd, so we should not process it. Reported-by: <andrew.gregory.8@gmail.com>
2012-09-26tmpfiles.d init.d scriptsRobin H. Johnson
Now that the tmpfiles.d code is more tested, actually call it from init.d. It assumes that /run is already available when it runs. Please note it runs TWICE. - During sysinit, ideally just after /dev/shm is created, but before udev has started. After udev is also acceptable, but not ideal. - During boot, ideally just after localmount has completed. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26sh/tmpfiles.sh: Improve dry-run mode.Robin H. Johnson
Dry-run with more detail is more useful this way. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-08-16sh/tmpfiles: fix quoting for optional argumentsRobin H. Johnson
Some optional arguments were missing quotes in the tests, so produced spurious warnings. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-03-12sh/tmpfiles: Upstream clarifications & quoting fixes.Robin H. Johnson
Upstream has clarified via IRC: - hardcoding /usr/lib/ is an explicit choice. It should NOT consider $libdir at all. - The z/Z relabel types should call restorecon, not chcon. - Whitespace is not allowed in tmpfiles.d/*.conf path entries, but is allowed in globs results. Fixed quoting of path arguments for this. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-03-12sh/tmpfiles: tmpfiles.d support.Robin H. Johnson
This is the baseline support for tmpfiles.d. Still missing: - SELinux relabel, pending upstream clarification - LIBDIR vs multilib systems, pending upstream clarification - Whitespace in paths? - Clean support not implemented - "x" exclude type not implemented X-Gentoo-Bug: 396003 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=396003 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
generated by cgit v1.2.3 (git 2.39.1) at 2024-09-20 13:24:14 +0000