aboutsummaryrefslogtreecommitdiff
path: root/render/vulkan/renderer.c
AgeCommit message (Collapse)Author
2023-06-01render/vulkan: improve error handling in render_pass_submit()Simon Ser
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3644
2023-05-31render/vulkan: handle vulkan_record_stage_cb() failuresSimon Ser
2023-05-30render/vulkan: implement render pass APISimon Ser
2023-05-24render/vulkan: de-dup pipeline layout initializationSimon Ser
2023-05-24render/vulkan: check format support before creating YCbCr samplerSimon Ser
We need to check whether the format supports dma_tex_ycbcr_features before creating the YCbCr sampler.
2023-05-24render/vulkan: generalize YCbCr format supportSimon Ser
2023-05-24render/vulkan: add init_{default,ycbcr}_pipeline_layout()Simon Ser
2023-05-24render/vulkan: add vulkan_get_pipeline_layout()Simon Ser
Will make it easier to add more pipeline layouts for other YCbCr formats.
2023-05-24render/vulkan: introduce struct wlr_vk_pipeline_layoutSimon Ser
This will make it easier to create one pipeline layout (plus related objects) per YCbCr format.
2023-05-24render/vulkan: use same sampler params for RGBA and NV12Simon Ser
2023-05-24render/vulkan: use VK_SAMPLER_ADDRESS_MODE_CLAMP_TO_EDGE for default samplerSimon Ser
We don't actually need the REPEAT mode, and this makes things more consistent with the YCbCr sampler (which requires CLAMP_TO_EDGE for spec compliance). Also drop borderColor which is unused for this mode.
2023-05-24render/vulkan: fix VkPipelineLayout when texturing NV12Simon Ser
The default pipeline layout was always passed. However, for NV12 we need to pass a different one.
2023-05-24render/vulkan: extract quad pipeline init to separate functionSimon Ser
Makes it clearer that all of these structs are for the quad pipeline.
2023-05-22render/vulkan: drop unnecessary commentsSimon Ser
Some comments in here are noise.
2023-05-21render/pixel-format: add support for block-based formatsSimon Ser
Some formats like sub-sampled YCbCr use a block of bytes to store the color values for more than one pixel. Update our format table to be able to handle such formats.
2023-05-12render/vulkan: allow rendering to non-8-bit buffersManuel Stoeckl
This is implemented by a two-subpass rendering scheme; the first subpass draws (and blends) onto a linear R16G16B16A16_SFLOAT buffer, while the second subpass performs linear->srgb conversion, writing onto the actual output buffer.
2023-05-12render/vulkan: wait for idle queue before destroying render bufferSimon Ser
This fixes the following validation errors when shutting down Sway: 00:00:01.263 [wlr] [render/vulkan/vulkan.c:65] Validation Error: [ VUID-vkDestroyFramebuffer-framebuffer-00892 ] Object 0: handle = 0x62e00003c400, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0xdb308312 | Cannot call vkDestroyFramebuffer on VkFramebuffer 0x2e2cd000000002b[] that is currently in use by a command buffer. The Vulkan spec states: All submitted commands that refer to framebuffer must have completed execution (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkDestroyFramebuffer-framebuffer-00892) (VUID-vkDestroyFramebuffer-framebuffer-00892) 00:00:01.264 [wlr] [render/vulkan/vulkan.c:65] Validation Error: [ VUID-vkDestroyImage-image-01000 ] Object 0: handle = 0x62e00003c400, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0xf2d29b5a | Cannot call vkDestroyImage on VkImage 0x3fbcd60000000028[] that is currently in use by a command buffer. The Vulkan spec states: All submitted commands that refer to image, either directly or via a VkImageView, must have completed execution (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkDestroyImage-image-01000) (VUID-vkDestroyImage-image-01000)
2023-05-06render/vulkan: increase next descriptor pool sizeManuel Stoeckl
This ensures that the pool sizes grow exponentially, making the number of pools needed logarithmic in the number of descriptors, instead of linear. Since the first pool's size is 256, this change only has an effect when the compositor creates a large number of textures.
2023-05-04render/vulkan: add support for NV12Simon Ser
2023-05-04render/vulkan: fix code style for function bracketsSimon Ser
2023-04-28render/vulkan: use VK_KHR_synchronization2Simon Ser
This simplifies the vkQueueSubmit call, removing the need to pass timeline semaphore point values as separate arrays.
2023-04-18render/vulkan: use full names for extension command fieldsSimon Ser
This makes grepping much easier.
2023-03-26render/vulkan: avoid double-close on sync_file FD after semaphore importSimon Ser
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3610
2023-02-28render/vulkan: prefer render node for wlr_renderer_get_drm_fd()Simon Ser
Instead of returning a primary node from wlr_renderer_get_drm_fd(), prefer to return a render node if any.
2023-02-24vulkan: silence -Wint-conversion on 32-bit architecturesJan Beich
render/vulkan/renderer.c:388:70: error: incompatible pointer to integer conversion passing 'void *' to parameter of type 'VkFence' (aka 'unsigned long long') [-Werror,-Wint-conversion] VkResult res = vkQueueSubmit(renderer->dev->queue, 1, &submit_info, NULL); ^~~~ render/vulkan/renderer.c:1141:81: error: incompatible pointer to integer conversion passing 'void *' to parameter of type 'VkFence' (aka 'unsigned long long') [-Werror,-Wint-conversion] VkResult res = vkQueueSubmit(renderer->dev->queue, submit_count, submit_infos, NULL); ^~~~ /usr/include/sys/_null.h:34:14: note: expanded from macro 'NULL' #define NULL ((void *)0) ^~~~~~~~~~~ /usr/local/include/vulkan/vulkan_core.h:4054:49: note: passing argument to parameter 'fence' here VkFence fence); ^ Fixes: a8a194d695af ("render/vulkan: switch to timeline semaphores")
2023-01-19render/vulkan: check that requested size is smaller than maxSimon Ser
Fail with a clearer error when the requested size is too large. Without this, we allocate a buffer with a size smaller than what was requested. References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3975
2023-01-18vulkan: increase max stage size to support large buffersBrett Ernst
2023-01-18render/vulkan: use correct source offset in read_pixelsllyyr
2022-12-06render/vulkan: wait for DMA-BUF fencesSimon Ser
The Vulkan spec doesn't guarantee that the driver will wait for implicitly synchronized client buffers before texturing from them. radv happens to perform the wait, but anv doesn't. Fix this by extracting implicit fences from DMA-BUFs, importing them into Vulkan as a VkSemaphore objects, and make the render pass wait on these VkSemaphores.
2022-12-03render/vulkan: use initializers for VkSubmitInfoSimon Ser
2022-12-03render/vulkan: remove stage_cb conditionalSimon Ser
We always have a stage_cb at this point.
2022-12-03render/vulkan: remove pre_cb in vulkan_end()Simon Ser
pre_cb was an alias for stage_cb->vk. Let's just use a single variable instead. Additionally, early return when vulkan_record_stage_cb() fails. We were crashing in vkCmdPipelineBarrier() if that happened.
2022-12-03render/vulkan: fix vkCmdClearAttachments validation errorSimon Ser
Skip clears with an empty scissor. Fixes the following validation error: 00:00:09.734 [wlr] [render/vulkan/vulkan.c:61] Validation Error: [ VUID-vkCmdClearAttachments-rect-02682 ] Object 0: handle = 0x62600001b100, type = VK_OBJECT_TYPE_COMMAND_BUFFER; | MessageID = 0xadbd476f | CmdClearAttachments(): pRects[0].rect.extent.width is zero. The Vulkan spec states: The rect member of each element of pRects must have an extent.width greater than 0 (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkCmdClearAttachments-rect-02682) (VUID-vkCmdClearAttachments-rect-02682)
2022-12-02render/vulkan: fix commaSimon Ser
2022-12-02render/vulkan: use initializers for VkImageMemoryBarrierSimon Ser
2022-12-02render/vulkan: fix missing pSignalSemaphores for stage CBSimon Ser
We were filling VkTimelineSemaphoreSubmitInfoKHR.pSignalSemaphoreValues, but we were missing VkSubmitInfo.pSignalSemaphores. This was causing VkTimelineSemaphoreSubmitInfoKHR.pSignalSemaphoreValues to be ignored. By chance, the render command buffer was using the next timeline point, so we were waiting for that instead.
2022-12-02render/vulkan: move VkDescriptorSetAllocateInfo downSimon Ser
Move it down, right before it's used.
2022-12-02render/vulkan: check for barrier array alloc failureSimon Ser
2022-12-02render/vulkan: drop "_format" in wlr_vk_format fieldsSimon Ser
"format" is already in the name, no need to repeat ourselves. `format->vk_format` sounds a bit redundant.
2022-11-28render/vulkan: import semaphore to DMA-BUF instead of blockingSimon Ser
Right now the Vulkan renderer blocks until the frame is complete after rendering. This is necessary because Vulkan doesn't interoperate well with implicit sync we use everywhere else. Use the new kernel API to import a sync_file into a DMA-BUF to avoid blocking.
2022-11-28render/vulkan: release stage buffers after command buffer completesSimon Ser
We need to wait for the pending command buffer to complete before re-using stage buffers. Otherwise we'll overwrite the stage buffer with new contents before the texture is fully uploaded.
2022-11-28render/vulkan: destroy textures after command buffer completesSimon Ser
We need to wait for any pending command buffer to complete before we're able to fully destroy a struct wlr_vk_texture: the Vulkan spec requires the VkDescriptorSet to be kept alive. So far we've done this in vulkan_end(), after blocking until the command buffer completes. We'll soon stop blocking, so move this logic in get_command_buffer(), where we check which commands buffers have completed in a non-blocking fashion.
2022-11-25render/vulkan: align staging buffers for texture uploadManuel Stoeckl
vkCmdCopyBufferToImage requires that the buffer offset be a multiple of the texel block size, which for single plane uncompressed formats is the same as the number of bytes per pixel. This commit adds an alignment parameter to vulkan_get_stage_span which ensures that the provided span (and the sequence of image copy operations derived which use it) have this alignment.
2022-11-25render/vulkan: add support for RGB565 texture formatManuel Stoeckl
Since this does not have a matching _SRGB-type vulkan format, add a new shader variant/pipeline to perform the sRGB->linear texture conversion.
2022-11-15render/vulkan: detect device lossSimon Ser
2022-11-15render: allow wlr_renderer_impl.begin to failSimon Ser
Make it return a bool to indicate success/failure. Adapt the various implementations to check errors.
2022-11-11render/vulkan: remove hardcoded validation layersSimon Zeni
Users should use the VK_INSTANCE_LAYERS env var to set layers at runtime
2022-11-11render/vulkan: wait for device to become idle in vulkan_destroy()Simon Ser
It's not safe to destroy any resources which might still be in-use by the GPU. Wait for any asynchronous tasks to complete before destroying everything.
2022-11-11render/vulkan: always wait for last stage to complete before renderingSimon Ser
When we have multiple command buffers in flight, we need to make sure we don't start rendering before the previous texture uploads are complete.
2022-11-11render/vulkan: use command buffer pool for stageSimon Ser