Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
We need to check whether the format supports dma_tex_ycbcr_features
before creating the YCbCr sampler.
|
|
|
|
|
|
Will make it easier to add more pipeline layouts for other YCbCr
formats.
|
|
This will make it easier to create one pipeline layout (plus related
objects) per YCbCr format.
|
|
|
|
We don't actually need the REPEAT mode, and this makes things more
consistent with the YCbCr sampler (which requires CLAMP_TO_EDGE for
spec compliance).
Also drop borderColor which is unused for this mode.
|
|
The default pipeline layout was always passed. However, for NV12 we
need to pass a different one.
|
|
Makes it clearer that all of these structs are for the quad pipeline.
|
|
Some comments in here are noise.
|
|
Some formats like sub-sampled YCbCr use a block of bytes to
store the color values for more than one pixel. Update our format
table to be able to handle such formats.
|
|
This is implemented by a two-subpass rendering scheme; the first
subpass draws (and blends) onto a linear R16G16B16A16_SFLOAT buffer,
while the second subpass performs linear->srgb conversion, writing
onto the actual output buffer.
|
|
This fixes the following validation errors when shutting down Sway:
00:00:01.263 [wlr] [render/vulkan/vulkan.c:65] Validation Error: [ VUID-vkDestroyFramebuffer-framebuffer-00892 ] Object 0: handle = 0x62e00003c400, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0xdb308312 | Cannot call vkDestroyFramebuffer on VkFramebuffer 0x2e2cd000000002b[] that is currently in use by a command buffer. The Vulkan spec states: All submitted commands that refer to framebuffer must have completed execution (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkDestroyFramebuffer-framebuffer-00892) (VUID-vkDestroyFramebuffer-framebuffer-00892)
00:00:01.264 [wlr] [render/vulkan/vulkan.c:65] Validation Error: [ VUID-vkDestroyImage-image-01000 ] Object 0: handle = 0x62e00003c400, type = VK_OBJECT_TYPE_DEVICE; | MessageID = 0xf2d29b5a | Cannot call vkDestroyImage on VkImage 0x3fbcd60000000028[] that is currently in use by a command buffer. The Vulkan spec states: All submitted commands that refer to image, either directly or via a VkImageView, must have completed execution (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkDestroyImage-image-01000) (VUID-vkDestroyImage-image-01000)
|
|
This ensures that the pool sizes grow exponentially, making the number
of pools needed logarithmic in the number of descriptors, instead of
linear. Since the first pool's size is 256, this change only has an
effect when the compositor creates a large number of textures.
|
|
|
|
|
|
This simplifies the vkQueueSubmit call, removing the need to pass
timeline semaphore point values as separate arrays.
|
|
This makes grepping much easier.
|
|
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3610
|
|
Instead of returning a primary node from wlr_renderer_get_drm_fd(),
prefer to return a render node if any.
|
|
render/vulkan/renderer.c:388:70: error: incompatible pointer to integer conversion passing 'void *' to parameter of type 'VkFence' (aka 'unsigned long long') [-Werror,-Wint-conversion]
VkResult res = vkQueueSubmit(renderer->dev->queue, 1, &submit_info, NULL);
^~~~
render/vulkan/renderer.c:1141:81: error: incompatible pointer to integer conversion passing 'void *' to parameter of type 'VkFence' (aka 'unsigned long long') [-Werror,-Wint-conversion]
VkResult res = vkQueueSubmit(renderer->dev->queue, submit_count, submit_infos, NULL);
^~~~
/usr/include/sys/_null.h:34:14: note: expanded from macro 'NULL'
#define NULL ((void *)0)
^~~~~~~~~~~
/usr/local/include/vulkan/vulkan_core.h:4054:49: note: passing argument to parameter 'fence' here
VkFence fence);
^
Fixes: a8a194d695af ("render/vulkan: switch to timeline semaphores")
|
|
Fail with a clearer error when the requested size is too large.
Without this, we allocate a buffer with a size smaller than what
was requested.
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3975
|
|
|
|
|
|
The Vulkan spec doesn't guarantee that the driver will wait for
implicitly synchronized client buffers before texturing from them.
radv happens to perform the wait, but anv doesn't.
Fix this by extracting implicit fences from DMA-BUFs, importing
them into Vulkan as a VkSemaphore objects, and make the render pass
wait on these VkSemaphores.
|
|
|
|
We always have a stage_cb at this point.
|
|
pre_cb was an alias for stage_cb->vk. Let's just use a single
variable instead.
Additionally, early return when vulkan_record_stage_cb() fails.
We were crashing in vkCmdPipelineBarrier() if that happened.
|
|
Skip clears with an empty scissor.
Fixes the following validation error:
00:00:09.734 [wlr] [render/vulkan/vulkan.c:61] Validation Error: [ VUID-vkCmdClearAttachments-rect-02682 ] Object 0: handle = 0x62600001b100, type = VK_OBJECT_TYPE_COMMAND_BUFFER; | MessageID = 0xadbd476f | CmdClearAttachments(): pRects[0].rect.extent.width is zero. The Vulkan spec states: The rect member of each element of pRects must have an extent.width greater than 0 (https://www.khronos.org/registry/vulkan/specs/1.3-extensions/html/vkspec.html#VUID-vkCmdClearAttachments-rect-02682) (VUID-vkCmdClearAttachments-rect-02682)
|
|
|
|
|
|
We were filling VkTimelineSemaphoreSubmitInfoKHR.pSignalSemaphoreValues,
but we were missing VkSubmitInfo.pSignalSemaphores.
This was causing VkTimelineSemaphoreSubmitInfoKHR.pSignalSemaphoreValues
to be ignored. By chance, the render command buffer was using the
next timeline point, so we were waiting for that instead.
|
|
Move it down, right before it's used.
|
|
|
|
"format" is already in the name, no need to repeat ourselves.
`format->vk_format` sounds a bit redundant.
|
|
Right now the Vulkan renderer blocks until the frame is complete
after rendering. This is necessary because Vulkan doesn't
interoperate well with implicit sync we use everywhere else.
Use the new kernel API to import a sync_file into a DMA-BUF to
avoid blocking.
|
|
We need to wait for the pending command buffer to complete before
re-using stage buffers. Otherwise we'll overwrite the stage buffer
with new contents before the texture is fully uploaded.
|
|
We need to wait for any pending command buffer to complete before
we're able to fully destroy a struct wlr_vk_texture: the Vulkan
spec requires the VkDescriptorSet to be kept alive.
So far we've done this in vulkan_end(), after blocking until the
command buffer completes. We'll soon stop blocking, so move this
logic in get_command_buffer(), where we check which commands buffers
have completed in a non-blocking fashion.
|
|
vkCmdCopyBufferToImage requires that the buffer offset be a multiple
of the texel block size, which for single plane uncompressed formats
is the same as the number of bytes per pixel. This commit adds an
alignment parameter to vulkan_get_stage_span which ensures that the
provided span (and the sequence of image copy operations derived which
use it) have this alignment.
|
|
Since this does not have a matching _SRGB-type vulkan format, add a
new shader variant/pipeline to perform the sRGB->linear texture
conversion.
|
|
|
|
Make it return a bool to indicate success/failure. Adapt the
various implementations to check errors.
|
|
Users should use the VK_INSTANCE_LAYERS env var to set layers at runtime
|
|
It's not safe to destroy any resources which might still be in-use
by the GPU. Wait for any asynchronous tasks to complete before
destroying everything.
|
|
When we have multiple command buffers in flight, we need to make
sure we don't start rendering before the previous texture uploads
are complete.
|
|
|
|
Before re-using a VkCommandBuffer, we need to wait for its
operations to complete. Right now we unconditionally wait for
rendering to complete in vulkan_end(), however we have plans to
fix this [1]. To fully avoid blocking, we need to handle multiple
command buffers in flight at the same time (e.g. for multi-output,
or for rendering followed by texture uploads).
Implement a pool of command buffers. When we need to render, we
pick a command buffer from the pool which has completed its
operations. If we don't find one, try to allocate a new command
buffer. If we don't have slots in the pool anymore, block like we
did before.
[1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3574
|