aboutsummaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-05-02Add wlr_surface_accepts_touchDavid96
2020-04-28render/texture: add width and height fieldsSimon Ser
Instead of requiring compositors to call wlr_texture_get_size each time they want to access the texture's size, expose this information as wlr_texture fields.
2020-04-28backend/drm: move atomic cursor code into pageflip codeScott Anderson
It makes sense to construct as much atomic state as possible in the same place, so it doesn't get lost if we "reset" it.
2020-04-28backend/drm: introduce wlr_drm_fbScott Anderson
This is a type which manages gbm_surfaces and imported dmabufs in the same place, and makes the lifetime management between the two shared. It should lead to easier to understand code, and fewer special cases. This also contains a fair bit of refactoring to start using this new type. Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-22backend/headless: add wlr_headless_backend_create_with_rendererSimon Ser
This allows one to create a headless backend with an existing renderer.
2020-04-22backend/headless: use FBOs instead of pbuffersSimon Ser
2020-04-22render/gles2: add wlr_gles2_renderer_check_extSimon Ser
2020-04-22output_layout: improve docsSimon Ser
2020-04-17Document the events of wlr_layer_surfaceIsaac Freund
2020-04-15seat: add selection event docsTudor Roman
2020-04-10output: fix blurred hw cursors with fractional scalingSimon Ser
The scaling factor was being implicitly cast to an int. Closes: https://github.com/swaywm/sway/issues/4927
2020-04-09render/egl: make config attribs constSimon Ser
wlr_egl_init is not allowed to mutate these attribs.
2020-04-08Add wlr_output_impl.rollbackSimon Ser
Most of the pending output state is not forwarded to the backend prior to an output commit. For instance, wlr_output_set_mode just stashes the mode without calling any wlr_output_impl function. wlr_output_impl.commit is responsible for applying the pending mode. However, there are exceptions to this rule. The first one is wlr_output_attach_render. It won't go away before renderer v6 is complete, because it needs to set the current EGL surface. The second one is wlr_output_attach_buffer. wlr_output_impl.attach_buffer is removed in [1]. When wlr_output_rollback is called, all pending state is supposed to be cleared. This works for all the state except the two exceptions mentionned above. To fix this, introduce wlr_output_impl.rollback. Right now, the backend resets the current EGL surface. This prevents GL commands from affecting the output after wlr_output_rollback. This patch is required for FBO-based outputs to work properly. The compositor might be using FBOs for its own purposes [2], having leftover FBO state can have bad consequences. [1]: https://github.com/swaywm/wlroots/pull/2097 [2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08output: check buffer in wlr_output_testSimon Ser
Check that buffer can be scanned out in wlr_output_test instead of wlr_output_attach_buffer. This allows the backend to have access to the whole pending state when performing the check. This brings the wlr_output API more in line with the KMS API. This removes the need for wlr_output_attach_buffer to return a value, and for wlr_output_impl.attach_buffer.
2020-04-08output: introduce wlr_output_testSimon Ser
2020-04-02buffer: add width and heightSimon Ser
2020-04-02buffer: add a release eventSimon Ser
Consumers call wlr_buffer_lock. Once all consumers are done with the buffer, only the producer should have a reference to the buffer. In this case, we can release the buffer (and let the producer re-use it).
2020-04-02buffer: add destroy eventSimon Ser
2020-03-29Gracefully handle inert wl_output resourcesSimon Ser
Closes: https://github.com/swaywm/wlroots/issues/2088
2020-03-24Return false on wlr_keyboard_set_keymap() failureIsaac Freund
This allows users of the library to handle or ignore the error as they see fit.
2020-03-23Return failure of wlr_renderer_init_wl_display()Isaac Freund
This makes it easier for the user of this library to properly handle failure of this function. The signature of wlr_renderer_impl.init_wl_display was also modified to allow for proper error propagation.
2020-03-14Send pointer enter/leave on capability changeIsaac Freund
This is more correct according to the protocol and fixes issues with clients that wait for an enter event before processing pointer events.
2020-03-13Send keyboard enter/leave on capability changeIsaac Freund
This is more correct according to the protocol and fixes issues with clients that wait for an enter event before processing key events
2020-03-12output: replace wlr_output.damage with a damage eventSimon Ser
This patch disambiguates the needs_frame event by uncoupling it from damage. A new separate damage event is emitted when the backend damages the output (this happens e.g. VT is changed or software cursors are used). The event specifies the damaged region. The wlr_output.damage field is removed. wlr_output is no longer responsible for tracking its own damage, this is wlr_output_damage's job. This is a breaking change, but wlr_output_damage users shouldn't need an update. Bugs fixed: - Screen flashes on VT switch - Cursor damage issues on the X11 and headless backends Closes: https://github.com/swaywm/sway/issues/5086
2020-03-09buffer: remove unused wlr_client_buffer fieldsSimon Ser
Forgot to remove these, they are superseded by fields in wlr_buffer. Some functions were still using them. Fixes: 8afc1ed68cfa ("Introduce wlr_client_buffer") Closes: https://github.com/swaywm/sway/issues/5087
2020-03-06xwayland: remove underscore prefix from atom namesSimon Ser
Previously, some atoms had a leading underscore, others didn't. Be more consistent and never use a leading underscore (symbols with a leading underscore followed by an upper-case letter are reserved).
2020-03-06xwayland: remove duplicate _NET_WM_NAME entrySimon Ser
2020-03-06xwayland: use explicit indexes when initializing atom_mapSimon Ser
It's very easy to break the mapping between the atom_name enum and the atom_map array. Use explicit indexes to prevent issues.
2020-03-06backend/drm: add support for adaptive_sync_enabledSimon Ser
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06backend/x11: add support for adaptive_sync_enabledSimon Ser
This sets the _VARIABLE_REFRESH window property [1]. [1]: https://gitlab.freedesktop.org/mesa/mesa/blob/0616b7ac90cf4f86bb409d34101e3a3cceac8cbe/src/vulkan/wsi/wsi_common_x11.c#L1374
2020-03-06output: add adaptive_sync_enabled propertySimon Ser
2020-03-06Introduce wlr_client_bufferSimon Ser
Split out the client/resource handling out of wlr_buffer by introducing wlr_client_buffer. Make wlr_buffer an interface so that compositors can create their own wlr_buffers (e.g. backed by GBM, like glider [1]). [1]: https://github.com/emersion/glider/blob/c66847dd1cf8ae5e68666ce7cb3be41427b38dc7/include/gbm_allocator.h#L7
2020-03-04output: remove wlr_output_impl.schedule_frameSimon Ser
This function allowed backends to provide a custom function for frame scheduling. Before resuming the rendering loop, the DRM and Wayland backends would wait for vsync. There isn't a clear benefit of doing this. The only upside is that we get more stable timings: the delay between two repaints doesn't change too much and is close to a mutliple of the refresh rate. However this introduces latency, especially when a client misses a frame. For instance a fullscreen game missing vblank will need to wait more than a whole frame before being able to display new content. This worst case scenario happens as follows: - Client is still rendering its frame and cannot submit it in time - Deadline is reached - Compositor decides to stop the rendering loop since nothing changed on screen - Client finally manages to render its frame, submits it - Compositor calls wlr_output_schedule_frame - DRM backend waits for next vblank - The wlr_output frame event is fired, compositor draws new content on screen - On the second next vblank, the new content reaches the screen With this patch, the wlr_output frame event is fired immediately when the client submits its late frame. This change also makes it easier to support variable refresh rate, since VRR is all about being able to present too-late frames earlier. References: https://github.com/swaywm/wlroots/issues/1925
2020-02-20keyboard-shortcuts-inhibit: Implement the protocolMichael Weiser
The keyboard shortcuts inhibitor protocol is useful for remote desktop and virtualization software in order to request all keyboard events to be passed to it and (almost) none being resonded to by the compositor. This allows the session at the other end of the remote desktop connection or inside the virtual machine to be interacted with as usual (e.g. Alt+Tab to switch windows on the remote system instead of locally). Add the wayland protocol to the meson build files. Copy'n'search'n'replace the very similar idle inhibit protocol implementation. This already provides all the basic functionality: - creating and destroying inhibitors upon request by a client, - destruction in reaction to destruction of surfaces or displays, - a list of inhibitors to search through for existing ones as well as - a signal to be sent to the compositor upon registration of a new inhibitor. Beyond that we add the active and inactive events to be sent to the client and wire those to activate and deactivate functions for the compositor to call in confirmation of activation of a new inhibitor or (un-)suspending of an existing inhibitor e.g. in response to a special key combination entered by the user as suggested by the protocol. As mandated by the protocol, we check the existance of an inhibitor for a given surface and seat upon creation and return the error provided by the protocol for that purpose. Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Closes: https://github.com/swaywm/wlroots/issues/1817
2020-02-20Implement wlr-output-power-management-v1Guido Günther
Co-authored-by: Simon Ser <contact@emersion.fr>
2020-02-20text_input_v3: Note features supported by the text fieldDorota Czaplejewicz
With this information, consumers can realize they will never retrieve some state, and adjust their strategy.
2020-02-19output-management: add current_configuration_dirtyIlia Bozhinov
Previously, if the current configuration contains an output X which is destroyed, its head is automatically removed. If the compositor submits the new configuration after X was removed, the current output configuration is incorrectly detected to be the same as the previous one, and no done event is sent. To prevent this, we can just keep track of whether the current configuration is dirty, i.e whether we have sent a done event for it.
2020-02-17util: add wlr_output_destroy_safeSimon Ser
This adds a generic helper to destory transient globals. See [1]. This patch depends on [2] and [3]. [1]: https://gitlab.freedesktop.org/wayland/wayland/issues/10 [2]: https://gitlab.freedesktop.org/wayland/wayland/merge_requests/28 [3]: https://gitlab.freedesktop.org/wayland/wayland/merge_requests/30
2020-02-10virtual-pointer: Add request for mapping to specific outputAndri Yngvason
2020-01-28Declare wlr_seat globals as externJan Staněk
2020-01-24render: unconditionally disable implicit X11 includesSimon Ser
Even if the X11 backend or Xwayland is enabled, we don't rely on EGL/egl.h including Xlib headers.
2020-01-24build: replace version with soversionSimon Ser
This allows us to have a single number to update when doing a release. This drops WLR_VERSION_API_* definitions.
2020-01-10Drop RDP backendDrew DeVault
Users interested in remote access to wlroots compositors should use wayvnc: https://github.com/any1/wayvnc
2020-01-09backend/wayland: listen to wl_buffer.release eventsSimon Ser
Previously, we just assumed submitting a new frame would make the compositor release the current one. This isn't always the case, for instance Sway retains old buffers when a transaction is pending. This resulted in synchronization issues with clients writing in front-buffers. Fix this by un-referencing a wlr_buffer when the parent compositor sends wl_buffer.release. Tested by running a fullscreen mpv instance in Sway with the Wayland backend.
2019-12-31render: guard rendering operations between begin() and end()Simon Ser
Add a wlr_renderer.rendering bool, set it to true between wlr_renderer_begin() and wlr_renderer_end(). Assert we're rendering when calling functions that render.
2019-12-31virtual-pointer: Add support for the wlr-virtual-pointer-unstable-v1Josef Gajdusek
2019-12-30xdg-shell: fix inert xdg_surface handlingSimon Ser
Closes: https://github.com/swaywm/sway/issues/4834 Closes: https://github.com/swaywm/wlroots/issues/1890
2019-12-30output: refuse to commit a buffer or modeset a disabled outputSimon Ser
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30output: re-introduce atomic mode, enabled, scale and transformSimon Ser
This reverts commit 01f903874b7e27539488fad7f31476d5bcbc6ac9 and re-applies commit ee5f98ad49fed0439f3313ec685307831d1d1d05. Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue) See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR) See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates) See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates) See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-29xdg-output-v1: use wlr_output.descriptionSimon Ser
Since [1], the xdg-output description is mutable. Listen to output description changes and send the new output description when updated. [1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/commit/048102f21ad3783f64c4996704b07a13a010fd19