aboutsummaryrefslogtreecommitdiff
path: root/include/backend
AgeCommit message (Collapse)Author
2020-05-10backend/drm: simplify atomic commit logicSimon Ser
We don't need a per-CRTC atomic request anymore. Let's make the request per-commit so that it's easier to debug. This is also groundwork for supporting wlr_output_test properly.
2020-05-10backend/drm: GAMMA_LUT_SIZE isn't atomicSimon Ser
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy interface too. So we can unify both codepaths and remove wlr_drm_interface.crtc_get_gamma_size. It's no guaranteed to exist though, so we still need to keep the fallback.
2020-05-09backend/drm: remove crtc_set_cursor from interfaceSimon Ser
2020-05-09backend/drm: remove conn_enable from interfaceSimon Ser
Use crtc_commit instead.
2020-05-09backend/drm: rename crtc_pageflip to crtc_commitSimon Ser
Also add a flags argument. The commit function will also be used for disabling the CRTC.
2020-05-09backend/drm: apply gamma LUT on page-flipSimon Ser
2020-05-09backend/drm: remove mode argument to crtc_pageflipSimon Ser
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending output changes. More fields will be added in the future (e.g. active, gamma).
2020-05-09backend/drm: remove unused fieldsSimon Ser
2020-05-09backend/drm: remove wlr_drm_interface.crtc_move_cursorSimon Ser
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-02backend/headless: handle renderer destroySimon Ser
When the headless backend uses an already-existing renderer, it doesn't have ownership over the renderer. When the renderer is destroyed, the headless backend needs to destroy itself.
2020-04-28backend/drm: move atomic cursor code into pageflip codeScott Anderson
It makes sense to construct as much atomic state as possible in the same place, so it doesn't get lost if we "reset" it.
2020-04-28backend/drm: introduce wlr_drm_fbScott Anderson
This is a type which manages gbm_surfaces and imported dmabufs in the same place, and makes the lifetime management between the two shared. It should lead to easier to understand code, and fewer special cases. This also contains a fair bit of refactoring to start using this new type. Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-22backend/headless: add wlr_headless_backend_create_with_rendererSimon Ser
This allows one to create a headless backend with an existing renderer.
2020-04-22backend/headless: use FBOs instead of pbuffersSimon Ser
2020-04-08output: check buffer in wlr_output_testSimon Ser
Check that buffer can be scanned out in wlr_output_test instead of wlr_output_attach_buffer. This allows the backend to have access to the whole pending state when performing the check. This brings the wlr_output API more in line with the KMS API. This removes the need for wlr_output_attach_buffer to return a value, and for wlr_output_impl.attach_buffer.
2020-03-06backend/drm: add support for adaptive_sync_enabledSimon Ser
The vrr_capable and VRR_ENABLED properties are used.
2020-03-06backend/x11: add support for adaptive_sync_enabledSimon Ser
This sets the _VARIABLE_REFRESH window property [1]. [1]: https://gitlab.freedesktop.org/mesa/mesa/blob/0616b7ac90cf4f86bb409d34101e3a3cceac8cbe/src/vulkan/wsi/wsi_common_x11.c#L1374
2020-01-10Drop RDP backendDrew DeVault
Users interested in remote access to wlroots compositors should use wayvnc: https://github.com/any1/wayvnc
2020-01-09backend/wayland: listen to wl_buffer.release eventsSimon Ser
Previously, we just assumed submitting a new frame would make the compositor release the current one. This isn't always the case, for instance Sway retains old buffers when a transaction is pending. This resulted in synchronization issues with clients writing in front-buffers. Fix this by un-referencing a wlr_buffer when the parent compositor sends wl_buffer.release. Tested by running a fullscreen mpv instance in Sway with the Wayland backend.
2019-12-01backend/drm, backend/libinput: listen to session destroySimon Ser
This fixes a heap-use-after-free when the session is destroyed before the backend during wl_display_destroy: ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80 READ of size 8 at 0x614000000180 thread T0 #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192 #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204 #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24 #3 0x7f88e21af274 (/lib64/libinput.so.10+0x28274) #4 0x7f88e21aff1d (/lib64/libinput.so.10+0x28f1d) #5 0x7f88e219ddac (/lib64/libinput.so.10+0x16dac) #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d) #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130 #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50 #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54 #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107 #11 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466) #13 0x559fefb52385 in main ../main.c:67 #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152) #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d) 0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0) freed by thread T0 here: #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122 #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270 #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156 #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65 #4 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) previously allocated by thread T0 here: #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153 #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746 #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91 #3 0x559fefb51ea6 in main ../main.c:20 #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-11-21backend/wayland: add support for presentation-timeSimon Ser
2019-11-20Add -Wmissing-prototypesSimon Ser
This requires functions without a prototype definition to be static. This allows to detect dead code, export less symbols and put shared functions in headers.
2019-11-19backend/x11: Revert usage of present extensionScott Anderson
This reverts commit 3317134adff0ed179e0ecaea6d778dbd0684f771. This reverts commit a3c3b928a3814f1a44babf487b1508415958c721. There are some serious issues when running this on a real X server, as opposed to running this on Xwayland, where this was tested. More investigation needs to be done into why these issues happen and if our usage of the present extension is correct.
2019-11-13backend/wayland: add support for relative-pointer-unstable-v1Simon Ser
We just send relative motion events alongside absolute motion events. Compositors can figure out how absolute and relative events are related (e.g. whether they have been triggered by the same logical event) with the frame event.
2019-11-02backend/x11: Give X11 a real rendering loopScott Anderson
Makes use of the present extension to get notified of vsync, and not require any stupid timer hacks. Also make use of the present version of ConfigureNotify, because why not?
2019-10-27backend/drm: add support for custom modesSimon Ser
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-23backend/drm: retry without modifiers for the primary planeSimon Ser
On some Intel cards using modifiers can fill the FIFO and prevent hotplugged outputs from being properly enabled. Add a fallback without modifiers. Fixes: 2bdd1d0896cc ("backend/drm: use modifiers for our GBM buffers") References: https://github.com/swaywm/wlroots/issues/1840 Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-22backend/drm: track gbm_bo during direct scan-outSimon Ser
We need to destroy the gbm_bo we imported and drmModeRmFb. Closes: https://github.com/swaywm/sway/issues/4662
2019-10-16backend/wayland: add support for direct scan-outSimon Ser
Closes: https://github.com/swaywm/wlroots/issues/1830
2019-10-11backend/drm: use modifiers for our GBM buffersSimon Ser
2019-09-26Clean up wayland backend tablet supportMarkus Ongyerth
Mostly address feedback from emersion on PR #1694 Remove const qualifier from char *name, to allow free() call
2019-09-26Add zwp-tablet-unstable-v2 client supportMarkus Ongyerth
This allows wlroots based compositors to properly use graphic tablets with the wayland backend. This should be a decent quality of life improvement when working on tablet related features.
2019-08-03backend/drm: destroy output immediatelyRouven Czerwinski
Instead of waiting for the next pageflip, destroy the output immediately since we can now handle flips for outputs which no longer exist. Also demote the missing crtc on flip to debug. Fixes #1739
2019-07-27Remove all wayland-server.h includesSimon Ser
The documentation for wayland-server.h says: > Use of this header file is discouraged. Prefer including > wayland-server-core.h instead, which does not include the server protocol > header and as such only defines the library PI, excluding the deprecated API > below. Replacing wayland-server.h with wayland-server-core.h allows us to drop the WL_HIDE_DEPRECATED declaration.
2019-07-17backends/x11: Touch supportSebastian Krzyszkowiak
Closes #1749
2019-06-22backend/drm: Simplify object matching codeScott Anderson
We originally used match_obj on planes, but this was largely unnecessary. Instead, this assigns planes statically at startup.
2019-06-21Support pointer-gestures on Wayland backendGreg V
2019-06-07backend/drm: fallback to drmModeAddFB2Simon Ser
2019-06-07backend/drm: hold buffers while scanning outSimon Ser
2019-06-07output: fix attach_buffer semanticsSimon Ser
2019-06-07backend/drm: check format when scanning out DMA-BUFSimon Ser
2019-06-07backend/drm: add basic support for direct scan-outemersion
2019-05-06backend/wayland: remove wl_shmSimon Ser
We bind to it but never use it.
2019-05-06backend/wayland: use xdg-decoration-unstable-v1Simon Ser
This allows the toplevel to have proper decorations on compositors that support xdg-decoration-unstable-v1.
2019-04-08Add FreeRDP backend for remote desktop supportDrew DeVault
2019-03-15backend/noop: improve output number handlingBrian Ashworth
This improves the way the output numbers are handled for the noop backend. Instead of using the number of active outputs plus one, the last used number is stored and new outputs will increment it. This fixes the situation where you start with one output, create a second, close the first, and create a third. Without this, both outputs will be NOOP-2, which causes an issue since the identifier will also be identical. With this, the last output is NOOP-3 and the outputs can be distinguished.
2019-03-15backend/headless: improve output number handlingBrian Ashworth
This improves the way the output numbers are handled for the headless backend. Instead of using the number of active outputs plus one, the last used number is stored and new outputs will increment it. This fixes the situation where you start with one output, create a second, close the first, and create a third. Without this, both outputs will be HEADLESS-2, which causes an issue since the identifier will also be identical. With this, the last output is HEADLESS-3 and the outputs can be distinguished.
2019-03-15backend/x11: improve output number handlingBrian Ashworth
This improves the way the output numbers are handled for the x11 backend. Instead of using the number of active outputs plus one, the last used number is stored and new outputs will increment it. This fixes the situation where you start with one output, create a second, close the first, and create a third. Without this, both outputs will be X11-2, which causes an issue since the identifier will also be identical. With this, the last output is X11-3 and the outputs can be distinguished.
2019-03-15backend/wayland: improve output number handlingBrian Ashworth
This improves the way the output numbers are handled for the wayland backend. Instead of using the number of active outputs plus one, the last used number is stored and new outputs will increment it. This fixes the situation where you start with one output, create a second, close the first, and create a third. Without this, both outputs will be `WL-2`, which causes an issue since the identifier will also be identical. With this, the last output is `WL-3` and the outputs can be distinguished.
2019-02-19backend/drm: fix modeset on drm fd resumeBrian Ashworth
On DRM resume, such as switching back to a TTY, the output needs to be modeset to the current mode. However, wlr_output_set_mode will return early when attempting to set the mode to the current mode. This just steps around wlr_output_set_mode and calls drm_connector_set_mode directly.