| Age | Commit message (Collapse) | Author |
|---|
|
This has been added in [1] and allows us to close buffer handles
without manually calling drmIoctl.
[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/192
|
|
This helper is responsible for listening for new DRM devices and
create new child DRM backends as necessary.
|
|
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3181
|
|
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3183
|
|
When a connector ID is specified in a hotplug event, don't scan all
connectors. Only scan the connector that has changed.
|
|
The BO handle table exists to avoid double-closing a BO handle,
which aren't reference-counted by the kernel. But if we can
guarantee that there is only ever a single ref for each BO handle,
then we don't need the BO handle table anymore.
This is possible if we create the handle right before the ADDFB2
IOCTL, and close the handle right after. The handles are very
short-lived and we don't need to track their lifetime.
Because of multi-planar FBs, we need to be a bit careful: some
FB planes might share the same handle. But with a small check, it's
easy to avoid double-closing the same handle (which wouldn't be a
big deal anyways).
There's one gotcha though: drmModeSetCursor2 takes a BO handle as
input. Saving the handles until drmModeSetCursor2 time would require
us to track BO handle lifetimes, so we wouldn't be able to get rid
of the BO handle table. As a workaround, use drmModeGetFB to turn the
FB ID back to a BO handle, call drmModeSetCursor2 and then immediately
close the BO handle. The overhead should be minimal since these IOCTLs
are pretty cheap.
Closes: https://github.com/swaywm/wlroots/issues/3164
|
|
Expose the panel orientation with wlr_drm_connector_get_panel_orientation.
Leave it to the compositor to consume this information and configure the
output accordingly.
Closes: https://github.com/swaywm/wlroots/issues/1581
|
|
|
|
Previously used by attempt_enable_needs_modeset, but this has been
dropped in the previous commit.
|
|
Previously, we were copying wlr_output_state on the stack and
patching it up to be guaranteed to have a proper drmModeModeInfo
stored in it (and not a custom mode). Also, we had a bunch of
helpers deriving DRM-specific information from the generic
wlr_output_state.
Copying the wlr_output_state worked fine so far, but with output
layers we'll be getting a wl_list in there. An empty wl_list stores
two pointers to itself, copying it on the stack blindly results in
infinite loops in wl_list_for_each.
To fix this, rework our DRM backend to stop copying wlr_output_state,
instead add a new struct wlr_drm_connector_state which holds both
the wlr_output_state and additional DRM-specific information.
|
|
"state" is easily confused with wlr_output_state.
|
|
Using GBM to import DRM dumb buffers tends to not work well. By
using GBM we're calling some driver-specific functions in Mesa.
These functions check whether Mesa can work with the buffer.
Sometimes Mesa has requirements which differ from DRM dumb buffers
and the GBM import will fail (e.g. on amdgpu).
Instead, drop GBM and use drmPrimeFDToHandle directly. But there's
a twist: BO handles are not ref'counted by the kernel and need to
be ref'counted in user-space [1]. libdrm usually performs this
bookkeeping and is used under-the-hood by Mesa.
We can't re-use libdrm for this task without using driver-specific
APIs. So let's just re-implement the ref'counting logic in wlroots.
The wlroots implementation is inspired from amdgpu's in libdrm [2].
Closes: https://github.com/swaywm/wlroots/issues/2916
[1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110
[2]: https://gitlab.freedesktop.org/mesa/drm/-/blob/1a4c0ec9aea13211997f982715fe5ffcf19dd067/amdgpu/handle_table.c
|
|
This allows the kernel to access our buffer damage. Some drivers
can take advantage of this, e.g. for PSR2 panels (Panel Self
Refresh) or for transfer over USB.
Closes: https://github.com/swaywm/wlroots/issues/1267
|
|
|
|
Unless we're dealing with a multi-GPU setup and the backend being
initialized is secondary, we don't need a renderer nor an allocator.
Stop initializing these.
|
|
|
|
We can't nuke it completely, we still need it for multi-GPU.
|
|
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.
The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.
KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).
Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.
[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
|
|
The callee can just get it from the wlr_drm_connector.
|
|
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.
Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
|
|
Doesn't make a lot of sense to split the cursor fields between
wlr_drm_plane and wlr_drm_connector. Let's just move everything to
wlr_drm_connector.
|
|
Instead of passing a wlr_texture to the backend, directly pass a
wlr_buffer. Use get_cursor_size and get_cursor_formats to create
a wlr_buffer that can be used as a cursor.
We don't want to pass a wlr_texture because we want to remove as
many rendering bits from the backend as possible.
|
|
This was always set to ARGB8888.
|
|
|
|
Backend-initiated mode changes can use this function instead of
going through drm_connector_set_mode. drm_connector_set_mode becomes
a mere drm_connector_commit_state helper.
|
|
All of the information is in wlr_output_state.
|
|
Replace it with drm_connector_state_mode, which computes the mode
from the wlr_output_state to be applied.
|
|
Replace it with drm_connector_state_active, which figures out
whether the connector is active depending on the wlr_output_state
to be applied.
|
|
Replace it with a new drm_connector_state_is_modeset function that
decides whether a modeset is necessary directly from the
wlr_output_state which is going to be applied.
|
|
Instead of relying on wlr_output.pending to be empty when performing
backend-initiated CRTC commits, use a zero wlr_output_state.
|
|
Stop assuming that the state to be applied is in output->pending in
crtc_commit. This will allow us to remove ephemeral fields in
wlr_drm_crtc, which are used scratch fields to stash temporary
per-commit data.
|
|
|
|
Any use of the DRM FD after the remove event results in a "Permission
denied" error.
|
|
|
|
To unify the code style of the project, absolute paths have been used in
some places, such as '#include "render/allocator.h"' in
"render/gbm_allocator.h". Except for include the wayland protocol
headers should be consistent.
|
|
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler
and better fits its name.
|
|
Make it take a plane instead, and rename to drm_plane_lock_surface.
|
|
|
|
The subconnector property indicates the connector sub-type. This is
useful because that usually indicates what kind of connector the user
has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will
indicate a DVI subconnector. Also some laptops have non-DP connectors
that are internally linked to a DP port on the GPU.
Set the output description accordingly.
See https://drmdb.emersion.fr/properties/3233857728/subconnector
|
|
Instead of importing buffers to GBM and KMS at each frame, cache them
and re-use them while the wlr_buffer is alive.
This is the same as [1] and [2] but for the DRM backend.
[1]: https://github.com/swaywm/wlroots/pull/2538
[2]: https://github.com/swaywm/wlroots/pull/2539
|
|
Stop keeping track of buffers on the parent GPU when multi-GPU is used.
This removes support for export_dmabuf on secondary GPUs, but renderer
v6 will bring this back by managing the swapchains in wlr_output instead
of the backends.
|
|
|
|
|
|
This will be useful once we start re-using wlr_drm_fb.
|
|
|
|
|
|
wlr_drm_connector.crtc may be updated by the DRM backend while a
page-flip is pending. In this case, the page-flip handler won't be able
to find the right wlr_drm_connector from the CRTC ID.
Save the CRTC when performing a page-flip to ensure we always find the
right connector when we get the event.
|
|
This callback allowed compositors to customize the EGL config used by
the renderer. However with renderer v6 EGL configs aren't used anymore.
Instead, buffers are allocated via GBM and GL FBOs are rendered to. So
customizing the EGL config is a no-op.
|
|
We now properly mark the cursor plane's formats as linear-only, and we
now have a version of wlr_drm_format_intersect that handles the case of
linear-only formats and implicit modifiers.
We can remove the special drm_plane_init_surface flag we had for cursor
planes. This also allows us to use a non-linear layout for cursor planes
on drivers that support it.
Tested on amdgpu GFX9.
|
|
Use the "<object>_<event>" notation for listeners, use
"handle_<listener>" for handlers.
|
