aboutsummaryrefslogtreecommitdiff
path: root/include/backend/drm
AgeCommit message (Collapse)Author
2021-09-08backend/drm: implement drm lease functionSimon Zeni
2021-09-07backend/drm: drop wlr_drm_connector.desired_modeSimon Ser
Previously used by attempt_enable_needs_modeset, but this has been dropped in the previous commit.
2021-09-07backend/drm: introduce wlr_drm_connector_stateSimon Ser
Previously, we were copying wlr_output_state on the stack and patching it up to be guaranteed to have a proper drmModeModeInfo stored in it (and not a custom mode). Also, we had a bunch of helpers deriving DRM-specific information from the generic wlr_output_state. Copying the wlr_output_state worked fine so far, but with output layers we'll be getting a wl_list in there. An empty wl_list stores two pointers to itself, copying it on the stack blindly results in infinite loops in wl_list_for_each. To fix this, rework our DRM backend to stop copying wlr_output_state, instead add a new struct wlr_drm_connector_state which holds both the wlr_output_state and additional DRM-specific information.
2021-09-07backend/drm: rename enum wlr_drm_connector_state to statusSimon Ser
"state" is easily confused with wlr_output_state.
2021-08-25backend/drm: introduce wlr_drm_bo_handle_tableSimon Ser
Using GBM to import DRM dumb buffers tends to not work well. By using GBM we're calling some driver-specific functions in Mesa. These functions check whether Mesa can work with the buffer. Sometimes Mesa has requirements which differ from DRM dumb buffers and the GBM import will fail (e.g. on amdgpu). Instead, drop GBM and use drmPrimeFDToHandle directly. But there's a twist: BO handles are not ref'counted by the kernel and need to be ref'counted in user-space [1]. libdrm usually performs this bookkeeping and is used under-the-hood by Mesa. We can't re-use libdrm for this task without using driver-specific APIs. So let's just re-implement the ref'counting logic in wlroots. The wlroots implementation is inspired from amdgpu's in libdrm [2]. Closes: https://github.com/swaywm/wlroots/issues/2916 [1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110 [2]: https://gitlab.freedesktop.org/mesa/drm/-/blob/1a4c0ec9aea13211997f982715fe5ffcf19dd067/amdgpu/handle_table.c
2021-08-18backend/drm: add support for FB_DAMAGE_CLIPSSimon Ser
This allows the kernel to access our buffer damage. Some drivers can take advantage of this, e.g. for PSR2 panels (Panel Self Refresh) or for transfer over USB. Closes: https://github.com/swaywm/wlroots/issues/1267
2021-08-17backend/drm: use addon for wlr_drm_fbSimon Ser
2021-07-28backend/drm: stop initializing renderer for parent backendSimon Ser
Unless we're dealing with a multi-GPU setup and the backend being initialized is secondary, we don't need a renderer nor an allocator. Stop initializing these.
2021-07-28backend/drm: drop drm_surface_{make,unset}_currentSimon Ser
2021-07-28backend/drm: remove primary swapchainSimon Ser
We can't nuke it completely, we still need it for multi-GPU.
2021-07-20backend/drm: stop restoring CRTCs on exitSimon Ser
This is the cause of the spurious "drmHandleEvent failed" messages at exit. restore_drm_outputs calls handle_drm_event in a loop without checking whether the FD is readable, so drmHandleEvent ends up with a short read (0 bytes) and returns an error. The loop's goal is to wait for all queued page-flip events to complete, to allow drmModeSetCrtc calls to succeed without EBUSY. The drmModeSetCrtc calls are supposed to restore whatever KMS state we were started with. But it's not clear from my PoV that restoring the KMS state on exit is desirable. KMS clients are supposed to save and restore the (full) KMS state on VT switch, but not on exit. Leaving our KMS state on exit avoids unnecessary modesets and allows flicker-free transitions between clients. See [1] for more details, and note that with Pekka we've concluded that a new flag to reset some KMS props to their default value on compositor start-up is the best way forward. As a side note, Weston doesn't restore the CRTC by does disable the cursor plane on exit (see drm_output_deinit_planes, I still think disabling the cursor plane shouldn't be necessary on exit). Additionally, restore_drm_outputs only a subset of the KMS state. Gamma and other atomic properties aren't accounted for. If the previous KMS client had some outputs disabled, restore_drm_outputs would restore a garbage mode. [1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-09backend/drm: remove backend arg from wlr_drm_interface.crtc_commitSimon Ser
The callee can just get it from the wlr_drm_connector.
2021-07-09backend/drm: add test_only arg to wlr_drm_interface.crtc_commitSimon Ser
Right now callers of drm_crtc_commit need to check whether the interface is legacy or atomic before passing the TEST_ONLY flag. Additionally, the fallbacks for legacy are in-place in the common code. Add a test_only arg to the crtc_commit hook. This way, there's no risk to pass atomic-only flags to the legacy function (add an assert to ensure this) and all of the legacy-specific logic can be put back into legacy.c (done in next commit).
2021-06-02backend/drm: move cursor fields to wlr_drm_connectorSimon Ser
Doesn't make a lot of sense to split the cursor fields between wlr_drm_plane and wlr_drm_connector. Let's just move everything to wlr_drm_connector.
2021-06-02output: take a wlr_buffer in set_cursorSimon Ser
Instead of passing a wlr_texture to the backend, directly pass a wlr_buffer. Use get_cursor_size and get_cursor_formats to create a wlr_buffer that can be used as a cursor. We don't want to pass a wlr_texture because we want to remove as many rendering bits from the backend as possible.
2021-06-02backend/drm: remove format arg from drm_plane_init_surfaceSimon Ser
This was always set to ARGB8888.
2021-06-02backend/drm: implement get_cursor_formats and get_cursor_sizeSimon Ser
2021-04-29backend/drm: introduce drm_connector_commit_stateSimon Ser
Backend-initiated mode changes can use this function instead of going through drm_connector_set_mode. drm_connector_set_mode becomes a mere drm_connector_commit_state helper.
2021-04-29backend/drm: remove mode arg from drm_connector_set_modeSimon Ser
All of the information is in wlr_output_state.
2021-04-29backend/drm: remove wlr_drm_crtc_state.modeSimon Ser
Replace it with drm_connector_state_mode, which computes the mode from the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc_state.activeSimon Ser
Replace it with drm_connector_state_active, which figures out whether the connector is active depending on the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc.pending_modesetSimon Ser
Replace it with a new drm_connector_state_is_modeset function that decides whether a modeset is necessary directly from the wlr_output_state which is going to be applied.
2021-04-29backend/drm: take wlr_output_state as arg in commit callersSimon Ser
Instead of relying on wlr_output.pending to be empty when performing backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-29backend/drm: take wlr_output_state as arg in crtc_commitSimon Ser
Stop assuming that the state to be applied is in output->pending in crtc_commit. This will allow us to remove ephemeral fields in wlr_drm_crtc, which are used scratch fields to stash temporary per-commit data.
2021-04-28render/gbm_allocator: make wlr_gbm_allocator_create return a wlr_allocatorSimon Zeni
2021-04-27backend/drm: destroy backend on udev remove eventSimon Ser
Any use of the DRM FD after the remove event results in a "Permission denied" error.
2021-04-27backend/drm: destroy when parent is destroyedSimon Ser
2021-04-06Use absolute paths in include in header fileszccrs
To unify the code style of the project, absolute paths have been used in some places, such as '#include "render/allocator.h"' in "render/gbm_allocator.h". Except for include the wayland protocol headers should be consistent.
2021-01-24backend/drm: don't blit in drm_fb_importSimon Ser
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler and better fits its name.
2021-01-24backend/drm: simplify drm_fb_lock_surfaceSimon Ser
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24backend/drm: document wlr_drm_plane surface fieldsSimon Ser
2021-01-17backend/drm: add support for the subconnector propertySimon Ser
The subconnector property indicates the connector sub-type. This is useful because that usually indicates what kind of connector the user has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will indicate a DVI subconnector. Also some laptops have non-DP connectors that are internally linked to a DP port on the GPU. Set the output description accordingly. See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-10backend/drm: re-use FBsSimon Ser
Instead of importing buffers to GBM and KMS at each frame, cache them and re-use them while the wlr_buffer is alive. This is the same as [1] and [2] but for the DRM backend. [1]: https://github.com/swaywm/wlroots/pull/2538 [2]: https://github.com/swaywm/wlroots/pull/2539
2021-01-10backend/drm: only keep track of local bufferSimon Ser
Stop keeping track of buffers on the parent GPU when multi-GPU is used. This removes support for export_dmabuf on secondary GPUs, but renderer v6 will bring this back by managing the swapchains in wlr_output instead of the backends.
2021-01-10backend/drm: add wlr_drm_buf.local_wlr_bufSimon Ser
2021-01-10backend/drm: introduce drm_fb_createSimon Ser
2021-01-10backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointersSimon Ser
This will be useful once we start re-using wlr_drm_fb.
2021-01-07remove unnecessary egl includesSimon Zeni
2021-01-07backend: remove wlr_egl from all backendsSimon Zeni
2021-01-03backend/drm: stash pending page-flip CRTCSimon Ser
wlr_drm_connector.crtc may be updated by the DRM backend while a page-flip is pending. In this case, the page-flip handler won't be able to find the right wlr_drm_connector from the CRTC ID. Save the CRTC when performing a page-flip to ensure we always find the right connector when we get the event.
2020-12-30Remove wlr_create_renderer_func_tSimon Ser
This callback allowed compositors to customize the EGL config used by the renderer. However with renderer v6 EGL configs aren't used anymore. Instead, buffers are allocated via GBM and GL FBOs are rendered to. So customizing the EGL config is a no-op.
2020-12-30backend/drm: remove special linear case for cursor planeSimon Ser
We now properly mark the cursor plane's formats as linear-only, and we now have a version of wlr_drm_format_intersect that handles the case of linear-only formats and implicit modifiers. We can remove the special drm_plane_init_surface flag we had for cursor planes. This also allows us to use a non-linear layout for cursor planes on drivers that support it. Tested on amdgpu GFX9.
2020-12-25backend/drm: make listener names more idiomaticSimon Ser
Use the "<object>_<event>" notation for listeners, use "handle_<listener>" for handlers.
2020-12-23backend/drm: use plural form for possible_crtcsSimon Ser
Make it clearer that this is a bitmask of CRTC indices.
2020-12-22backend/drm: remove drm_fb_acquireSimon Ser
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move the multi-GPU copy there if necessary.
2020-12-22backend/drm: make drm_fb_acquire return a FB IDSimon Ser
2020-12-22backend/drm: drop export_drm_boSimon Ser
Not used anymore.
2020-12-18backend/drm: remove unused wlr_drm_plane.drm_formatSimon Ser
2020-12-18backend/drm: refactor wlr_output destructionSimon Ser
Instead of hand-rolling our own manual wlr_output cleanup function, rely on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18backend/drm: introduce wlr_drm_connector.nameSimon Ser
The DRM backend is a little special when it comes to wlr_outputs: the wlr_drm_connectors are long-lived and are created even when no screen is connected. A wlr_drm_connector only advertises a wlr_output to the compositor when a screen is connected. As such, most of wlr_output's state is invalid when the connector is disconnected. We want to stop using wlr_output state on disconnected connectors. Introduce wlr_drm_connector.name which is always valid regardless of the connector status to avoid reading wlr_output.name when disconnected.