aboutsummaryrefslogtreecommitdiff
path: root/include/backend/drm/drm.h
AgeCommit message (Collapse)Author
2022-12-13backend/drm: rename wlr_drm_backend.outputs to connectorsSimon Ser
This list contains wlr_drm_connector entries, and there is no guarantee that the wlr_output fields are initialized.
2022-12-07backend/drm: store pending FB in stateSimon Ser
Instead of having a pending_fb field on the struct wlr_drm_plane, move it to struct wlr_drm_connector_state. That way, there's no risk having a stale pending FB around: the state doesn't survive across tests and commits. The cursor is a special case because it's disconnected from the atomic state: the wlr_backend_impl.set_cursor hook sets the cursor for the next commit. Move the field to wlr_drm_connector.cursor_pending_fb.
2022-12-07backend/drm: use separate field to store pending cursor FBSimon Ser
We'll move the pending primary FB into the connector state in the next commit, dropping wlr_drm_plane.pending_fb in the process. Introduce a dedicated field for the cursor, which has to be managed in a special way due to our set_cursor API.
2022-11-08Revert "backend/drm: fetch EDID manufacturer from udev_hwdb"Simon Ser
This reverts commit e646d882cf4949d290fff2ba3b7ae4c124f6f13d. This commit has added a dependency on udev_hwdb. This API isn't available on all platforms (e.g. FreeBSD), and further deepens our udev dependency. A better solution is being worked on in [1]. [1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3638
2022-10-07backend/drm: nuke wlr_drm_connector.desired_enabledSimon Ser
This field becomes stale too easily: for instance, see 6adca4089cf4 ("backend/drm: don't unconditionally set desired_enabled"). Additionally, drm_connector_alloc_crtc() needs to do some weird dance, restoring its previous value. Instead, add a connector arg to realloc_crtcs() to indicate a new connector we want to enable.
2022-08-10backend/drm: drop enum wlr_drm_connector_statusSimon Ser
We can just use libdrm's drmModeConnection enum instead.
2022-08-10backend/drm: drop WLR_DRM_CONN_NEEDS_MODESETSimon Ser
- Add wlr_output.enabled checks to CONNECTED checks - Replace NEEDS_MODESET with CONNECTED
2022-08-10backend/drm: remove unused WLR_DRM_CONN_CLEANUPSimon Ser
2022-06-19backend/drm: set "max bpc" to the maxSimon Ser
"max bpc" is a maximum value, the driver is free to choose a smaller value depending on the bandwidth available. Some faulty monitors misbehave with higher bpc values. We'll add a workaround if users get hit by these in practice. References: https://gitlab.freedesktop.org/wayland/weston/-/issues/612
2022-05-11backend/drm: fetch EDID manufacturer from udev_hwdbSimon Ser
Maintaining our internal table up-to-date is tedious: one needs to manually go through the PnP ID registry [1] and check whether we're missing any entry. udev_hwdb already has an API to fetch a manufacturer name from its PnP ID. Use that instead. [1]: https://uefi.org/pnp_id_list
2021-11-19backend/drm: scan leases on ueventSimon Ser
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3181
2021-11-19backend/drm: introduce wlr_drm_leaseSimon Ser
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3183
2021-11-02backend/drm: handle per-connector hotplug eventsSimon Ser
When a connector ID is specified in a hotplug event, don't scan all connectors. Only scan the connector that has changed.
2021-10-29backend/drm: get rid of BO handle tableSimon Ser
The BO handle table exists to avoid double-closing a BO handle, which aren't reference-counted by the kernel. But if we can guarantee that there is only ever a single ref for each BO handle, then we don't need the BO handle table anymore. This is possible if we create the handle right before the ADDFB2 IOCTL, and close the handle right after. The handles are very short-lived and we don't need to track their lifetime. Because of multi-planar FBs, we need to be a bit careful: some FB planes might share the same handle. But with a small check, it's easy to avoid double-closing the same handle (which wouldn't be a big deal anyways). There's one gotcha though: drmModeSetCursor2 takes a BO handle as input. Saving the handles until drmModeSetCursor2 time would require us to track BO handle lifetimes, so we wouldn't be able to get rid of the BO handle table. As a workaround, use drmModeGetFB to turn the FB ID back to a BO handle, call drmModeSetCursor2 and then immediately close the BO handle. The overhead should be minimal since these IOCTLs are pretty cheap. Closes: https://github.com/swaywm/wlroots/issues/3164
2021-09-08backend/drm: implement drm lease functionSimon Zeni
2021-09-07backend/drm: drop wlr_drm_connector.desired_modeSimon Ser
Previously used by attempt_enable_needs_modeset, but this has been dropped in the previous commit.
2021-09-07backend/drm: introduce wlr_drm_connector_stateSimon Ser
Previously, we were copying wlr_output_state on the stack and patching it up to be guaranteed to have a proper drmModeModeInfo stored in it (and not a custom mode). Also, we had a bunch of helpers deriving DRM-specific information from the generic wlr_output_state. Copying the wlr_output_state worked fine so far, but with output layers we'll be getting a wl_list in there. An empty wl_list stores two pointers to itself, copying it on the stack blindly results in infinite loops in wl_list_for_each. To fix this, rework our DRM backend to stop copying wlr_output_state, instead add a new struct wlr_drm_connector_state which holds both the wlr_output_state and additional DRM-specific information.
2021-09-07backend/drm: rename enum wlr_drm_connector_state to statusSimon Ser
"state" is easily confused with wlr_output_state.
2021-08-25backend/drm: introduce wlr_drm_bo_handle_tableSimon Ser
Using GBM to import DRM dumb buffers tends to not work well. By using GBM we're calling some driver-specific functions in Mesa. These functions check whether Mesa can work with the buffer. Sometimes Mesa has requirements which differ from DRM dumb buffers and the GBM import will fail (e.g. on amdgpu). Instead, drop GBM and use drmPrimeFDToHandle directly. But there's a twist: BO handles are not ref'counted by the kernel and need to be ref'counted in user-space [1]. libdrm usually performs this bookkeeping and is used under-the-hood by Mesa. We can't re-use libdrm for this task without using driver-specific APIs. So let's just re-implement the ref'counting logic in wlroots. The wlroots implementation is inspired from amdgpu's in libdrm [2]. Closes: https://github.com/swaywm/wlroots/issues/2916 [1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110 [2]: https://gitlab.freedesktop.org/mesa/drm/-/blob/1a4c0ec9aea13211997f982715fe5ffcf19dd067/amdgpu/handle_table.c
2021-07-28backend/drm: stop initializing renderer for parent backendSimon Ser
Unless we're dealing with a multi-GPU setup and the backend being initialized is secondary, we don't need a renderer nor an allocator. Stop initializing these.
2021-07-28backend/drm: remove primary swapchainSimon Ser
We can't nuke it completely, we still need it for multi-GPU.
2021-07-20backend/drm: stop restoring CRTCs on exitSimon Ser
This is the cause of the spurious "drmHandleEvent failed" messages at exit. restore_drm_outputs calls handle_drm_event in a loop without checking whether the FD is readable, so drmHandleEvent ends up with a short read (0 bytes) and returns an error. The loop's goal is to wait for all queued page-flip events to complete, to allow drmModeSetCrtc calls to succeed without EBUSY. The drmModeSetCrtc calls are supposed to restore whatever KMS state we were started with. But it's not clear from my PoV that restoring the KMS state on exit is desirable. KMS clients are supposed to save and restore the (full) KMS state on VT switch, but not on exit. Leaving our KMS state on exit avoids unnecessary modesets and allows flicker-free transitions between clients. See [1] for more details, and note that with Pekka we've concluded that a new flag to reset some KMS props to their default value on compositor start-up is the best way forward. As a side note, Weston doesn't restore the CRTC by does disable the cursor plane on exit (see drm_output_deinit_planes, I still think disabling the cursor plane shouldn't be necessary on exit). Additionally, restore_drm_outputs only a subset of the KMS state. Gamma and other atomic properties aren't accounted for. If the previous KMS client had some outputs disabled, restore_drm_outputs would restore a garbage mode. [1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-06-02backend/drm: move cursor fields to wlr_drm_connectorSimon Ser
Doesn't make a lot of sense to split the cursor fields between wlr_drm_plane and wlr_drm_connector. Let's just move everything to wlr_drm_connector.
2021-06-02output: take a wlr_buffer in set_cursorSimon Ser
Instead of passing a wlr_texture to the backend, directly pass a wlr_buffer. Use get_cursor_size and get_cursor_formats to create a wlr_buffer that can be used as a cursor. We don't want to pass a wlr_texture because we want to remove as many rendering bits from the backend as possible.
2021-06-02backend/drm: implement get_cursor_formats and get_cursor_sizeSimon Ser
2021-04-29backend/drm: introduce drm_connector_commit_stateSimon Ser
Backend-initiated mode changes can use this function instead of going through drm_connector_set_mode. drm_connector_set_mode becomes a mere drm_connector_commit_state helper.
2021-04-29backend/drm: remove mode arg from drm_connector_set_modeSimon Ser
All of the information is in wlr_output_state.
2021-04-29backend/drm: remove wlr_drm_crtc_state.modeSimon Ser
Replace it with drm_connector_state_mode, which computes the mode from the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc_state.activeSimon Ser
Replace it with drm_connector_state_active, which figures out whether the connector is active depending on the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc.pending_modesetSimon Ser
Replace it with a new drm_connector_state_is_modeset function that decides whether a modeset is necessary directly from the wlr_output_state which is going to be applied.
2021-04-29backend/drm: take wlr_output_state as arg in commit callersSimon Ser
Instead of relying on wlr_output.pending to be empty when performing backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-27backend/drm: destroy backend on udev remove eventSimon Ser
Any use of the DRM FD after the remove event results in a "Permission denied" error.
2021-04-27backend/drm: destroy when parent is destroyedSimon Ser
2021-04-06Use absolute paths in include in header fileszccrs
To unify the code style of the project, absolute paths have been used in some places, such as '#include "render/allocator.h"' in "render/gbm_allocator.h". Except for include the wayland protocol headers should be consistent.
2021-01-24backend/drm: document wlr_drm_plane surface fieldsSimon Ser
2021-01-10backend/drm: re-use FBsSimon Ser
Instead of importing buffers to GBM and KMS at each frame, cache them and re-use them while the wlr_buffer is alive. This is the same as [1] and [2] but for the DRM backend. [1]: https://github.com/swaywm/wlroots/pull/2538 [2]: https://github.com/swaywm/wlroots/pull/2539
2021-01-10backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointersSimon Ser
This will be useful once we start re-using wlr_drm_fb.
2021-01-07remove unnecessary egl includesSimon Zeni
2021-01-03backend/drm: stash pending page-flip CRTCSimon Ser
wlr_drm_connector.crtc may be updated by the DRM backend while a page-flip is pending. In this case, the page-flip handler won't be able to find the right wlr_drm_connector from the CRTC ID. Save the CRTC when performing a page-flip to ensure we always find the right connector when we get the event.
2020-12-25backend/drm: make listener names more idiomaticSimon Ser
Use the "<object>_<event>" notation for listeners, use "handle_<listener>" for handlers.
2020-12-23backend/drm: use plural form for possible_crtcsSimon Ser
Make it clearer that this is a bitmask of CRTC indices.
2020-12-18backend/drm: remove unused wlr_drm_plane.drm_formatSimon Ser
2020-12-18backend/drm: refactor wlr_output destructionSimon Ser
Instead of hand-rolling our own manual wlr_output cleanup function, rely on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18backend/drm: introduce wlr_drm_connector.nameSimon Ser
The DRM backend is a little special when it comes to wlr_outputs: the wlr_drm_connectors are long-lived and are created even when no screen is connected. A wlr_drm_connector only advertises a wlr_output to the compositor when a screen is connected. As such, most of wlr_output's state is invalid when the connector is disconnected. We want to stop using wlr_output state on disconnected connectors. Introduce wlr_drm_connector.name which is always valid regardless of the connector status to avoid reading wlr_output.name when disconnected.
2020-12-18backend/drm: introduce wlr_drm_conn_logSimon Ser
Simplify and unify connector-specific logging with a new wlr_drm_conn_log macro. This makes it easier to understand which connector a failure is about, without having to explicitly integrate the connector name in each log message.
2020-12-17backend/drm: add wlr_drm_backend.nameSimon Ser
Save the DRM device name in a wlr_drm_backend field, so that we can easily use it for logging purposes.
2020-12-15backend/drm: add wlr_drm_connector.backendSimon Ser
This allows the DRM code to have direct access to the wlr_drm_backend without having to go through an upcast via get_drm_backend_from_backend.
2020-12-08backend/drm: stop tracking overlay planesSimon Ser
We don't do anything with them. Once we do, we can easily add this back.
2020-11-19backend/session: operate on wlr_deviceSimon Ser
Instead of operating on FDs in {open,close}_device, operate on wlr_devices. This avoids the device lookup in wlr_session and allows callers to have access to wlr_device fields. For now, we use it to remove wlr_session_signal_add and replace it with a more idiomatic wlr_session.events.change field. In the future, other events will be added.
2020-07-21Fix typosAntonin Décimo