aboutsummaryrefslogtreecommitdiff
path: root/include/backend/drm/drm.h
AgeCommit message (Collapse)Author
2021-07-28backend/drm: stop initializing renderer for parent backendSimon Ser
Unless we're dealing with a multi-GPU setup and the backend being initialized is secondary, we don't need a renderer nor an allocator. Stop initializing these.
2021-07-28backend/drm: remove primary swapchainSimon Ser
We can't nuke it completely, we still need it for multi-GPU.
2021-07-20backend/drm: stop restoring CRTCs on exitSimon Ser
This is the cause of the spurious "drmHandleEvent failed" messages at exit. restore_drm_outputs calls handle_drm_event in a loop without checking whether the FD is readable, so drmHandleEvent ends up with a short read (0 bytes) and returns an error. The loop's goal is to wait for all queued page-flip events to complete, to allow drmModeSetCrtc calls to succeed without EBUSY. The drmModeSetCrtc calls are supposed to restore whatever KMS state we were started with. But it's not clear from my PoV that restoring the KMS state on exit is desirable. KMS clients are supposed to save and restore the (full) KMS state on VT switch, but not on exit. Leaving our KMS state on exit avoids unnecessary modesets and allows flicker-free transitions between clients. See [1] for more details, and note that with Pekka we've concluded that a new flag to reset some KMS props to their default value on compositor start-up is the best way forward. As a side note, Weston doesn't restore the CRTC by does disable the cursor plane on exit (see drm_output_deinit_planes, I still think disabling the cursor plane shouldn't be necessary on exit). Additionally, restore_drm_outputs only a subset of the KMS state. Gamma and other atomic properties aren't accounted for. If the previous KMS client had some outputs disabled, restore_drm_outputs would restore a garbage mode. [1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-06-02backend/drm: move cursor fields to wlr_drm_connectorSimon Ser
Doesn't make a lot of sense to split the cursor fields between wlr_drm_plane and wlr_drm_connector. Let's just move everything to wlr_drm_connector.
2021-06-02output: take a wlr_buffer in set_cursorSimon Ser
Instead of passing a wlr_texture to the backend, directly pass a wlr_buffer. Use get_cursor_size and get_cursor_formats to create a wlr_buffer that can be used as a cursor. We don't want to pass a wlr_texture because we want to remove as many rendering bits from the backend as possible.
2021-06-02backend/drm: implement get_cursor_formats and get_cursor_sizeSimon Ser
2021-04-29backend/drm: introduce drm_connector_commit_stateSimon Ser
Backend-initiated mode changes can use this function instead of going through drm_connector_set_mode. drm_connector_set_mode becomes a mere drm_connector_commit_state helper.
2021-04-29backend/drm: remove mode arg from drm_connector_set_modeSimon Ser
All of the information is in wlr_output_state.
2021-04-29backend/drm: remove wlr_drm_crtc_state.modeSimon Ser
Replace it with drm_connector_state_mode, which computes the mode from the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc_state.activeSimon Ser
Replace it with drm_connector_state_active, which figures out whether the connector is active depending on the wlr_output_state to be applied.
2021-04-29backend/drm: remove wlr_drm_crtc.pending_modesetSimon Ser
Replace it with a new drm_connector_state_is_modeset function that decides whether a modeset is necessary directly from the wlr_output_state which is going to be applied.
2021-04-29backend/drm: take wlr_output_state as arg in commit callersSimon Ser
Instead of relying on wlr_output.pending to be empty when performing backend-initiated CRTC commits, use a zero wlr_output_state.
2021-04-27backend/drm: destroy backend on udev remove eventSimon Ser
Any use of the DRM FD after the remove event results in a "Permission denied" error.
2021-04-27backend/drm: destroy when parent is destroyedSimon Ser
2021-04-06Use absolute paths in include in header fileszccrs
To unify the code style of the project, absolute paths have been used in some places, such as '#include "render/allocator.h"' in "render/gbm_allocator.h". Except for include the wayland protocol headers should be consistent.
2021-01-24backend/drm: document wlr_drm_plane surface fieldsSimon Ser
2021-01-10backend/drm: re-use FBsSimon Ser
Instead of importing buffers to GBM and KMS at each frame, cache them and re-use them while the wlr_buffer is alive. This is the same as [1] and [2] but for the DRM backend. [1]: https://github.com/swaywm/wlroots/pull/2538 [2]: https://github.com/swaywm/wlroots/pull/2539
2021-01-10backend/drm: make wlr_drm_plane.{pending,queued,current}_fb pointersSimon Ser
This will be useful once we start re-using wlr_drm_fb.
2021-01-07remove unnecessary egl includesSimon Zeni
2021-01-03backend/drm: stash pending page-flip CRTCSimon Ser
wlr_drm_connector.crtc may be updated by the DRM backend while a page-flip is pending. In this case, the page-flip handler won't be able to find the right wlr_drm_connector from the CRTC ID. Save the CRTC when performing a page-flip to ensure we always find the right connector when we get the event.
2020-12-25backend/drm: make listener names more idiomaticSimon Ser
Use the "<object>_<event>" notation for listeners, use "handle_<listener>" for handlers.
2020-12-23backend/drm: use plural form for possible_crtcsSimon Ser
Make it clearer that this is a bitmask of CRTC indices.
2020-12-18backend/drm: remove unused wlr_drm_plane.drm_formatSimon Ser
2020-12-18backend/drm: refactor wlr_output destructionSimon Ser
Instead of hand-rolling our own manual wlr_output cleanup function, rely on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18backend/drm: introduce wlr_drm_connector.nameSimon Ser
The DRM backend is a little special when it comes to wlr_outputs: the wlr_drm_connectors are long-lived and are created even when no screen is connected. A wlr_drm_connector only advertises a wlr_output to the compositor when a screen is connected. As such, most of wlr_output's state is invalid when the connector is disconnected. We want to stop using wlr_output state on disconnected connectors. Introduce wlr_drm_connector.name which is always valid regardless of the connector status to avoid reading wlr_output.name when disconnected.
2020-12-18backend/drm: introduce wlr_drm_conn_logSimon Ser
Simplify and unify connector-specific logging with a new wlr_drm_conn_log macro. This makes it easier to understand which connector a failure is about, without having to explicitly integrate the connector name in each log message.
2020-12-17backend/drm: add wlr_drm_backend.nameSimon Ser
Save the DRM device name in a wlr_drm_backend field, so that we can easily use it for logging purposes.
2020-12-15backend/drm: add wlr_drm_connector.backendSimon Ser
This allows the DRM code to have direct access to the wlr_drm_backend without having to go through an upcast via get_drm_backend_from_backend.
2020-12-08backend/drm: stop tracking overlay planesSimon Ser
We don't do anything with them. Once we do, we can easily add this back.
2020-11-19backend/session: operate on wlr_deviceSimon Ser
Instead of operating on FDs in {open,close}_device, operate on wlr_devices. This avoids the device lookup in wlr_session and allows callers to have access to wlr_device fields. For now, we use it to remove wlr_session_signal_add and replace it with a more idiomatic wlr_session.events.change field. In the future, other events will be added.
2020-07-21Fix typosAntonin Décimo
2020-06-01backend/drm: make adaptive_sync atomicSimon Ser
Stop using drmModeObjectSetProperty, set the property in the crtc_commit function instead.
2020-05-27backend/drm: don't set cursor if off-screenSimon Ser
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-26backend/drm: introduce pending and current CRTC stateSimon Ser
Previously, we only had the pending state (crtc->pending, crtc->mode and crtc->active). This causes issues when a commit fails: the pending state is left as-is, and the next commit may read stale data from it. This will also cause issues when implementing test-only commits: we need to rollback the pending CRTC state after a test-only commit. Introduce separate pending and current CRTC states. Properly update the current state after a commit.
2020-05-26backend/drm: nuke retry_pageflipSimon Ser
retry_pageflip is now dead code, since drm_connector_start_renderer isn't called anymore. It was previously called when enabling an output. The name "retry_pageflip" was a little confusing because the function retried a modeset and the timer wasn't set up while performing a simple page-flip. Let's just remove this altogether for now. We can discuss whether it's worth it to bring it back. Should we only do it on failed page-flips? Should we only do it on EBUSY?
2020-05-26backend/drm: make drm_connector_set_mode take a wlr_drm_connectorSimon Ser
Since this is an internal DRM backend function, there's no reason we need to take a generic wlr_output.
2020-05-26backend/drm: remove enable_drm_connectorSimon Ser
Merge enable_drm_connector into drm_connector_set_mode. This allows us to de-duplicate logic since enabling an output performs a modeset.
2020-05-14output: make wlr_output_set_gamma atomicSimon Ser
wlr_output_set_gamma is now double-buffered and applies the gamma LUT on the next output commit.
2020-05-10backend/drm: simplify atomic commit logicSimon Ser
We don't need a per-CRTC atomic request anymore. Let's make the request per-commit so that it's easier to debug. This is also groundwork for supporting wlr_output_test properly.
2020-05-09backend/drm: remove conn_enable from interfaceSimon Ser
Use crtc_commit instead.
2020-05-09backend/drm: apply gamma LUT on page-flipSimon Ser
2020-05-09backend/drm: remove mode argument to crtc_pageflipSimon Ser
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending output changes. More fields will be added in the future (e.g. active, gamma).
2020-05-09backend/drm: remove unused fieldsSimon Ser
2020-04-28backend/drm: introduce wlr_drm_fbScott Anderson
This is a type which manages gbm_surfaces and imported dmabufs in the same place, and makes the lifetime management between the two shared. It should lead to easier to understand code, and fewer special cases. This also contains a fair bit of refactoring to start using this new type. Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-08output: check buffer in wlr_output_testSimon Ser
Check that buffer can be scanned out in wlr_output_test instead of wlr_output_attach_buffer. This allows the backend to have access to the whole pending state when performing the check. This brings the wlr_output API more in line with the KMS API. This removes the need for wlr_output_attach_buffer to return a value, and for wlr_output_impl.attach_buffer.
2019-12-01backend/drm, backend/libinput: listen to session destroySimon Ser
This fixes a heap-use-after-free when the session is destroyed before the backend during wl_display_destroy: ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80 READ of size 8 at 0x614000000180 thread T0 #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192 #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204 #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24 #3 0x7f88e21af274 (/lib64/libinput.so.10+0x28274) #4 0x7f88e21aff1d (/lib64/libinput.so.10+0x28f1d) #5 0x7f88e219ddac (/lib64/libinput.so.10+0x16dac) #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d) #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130 #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50 #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54 #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107 #11 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466) #13 0x559fefb52385 in main ../main.c:67 #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152) #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d) 0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0) freed by thread T0 here: #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122 #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270 #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156 #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65 #4 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) previously allocated by thread T0 here: #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153 #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746 #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91 #3 0x559fefb51ea6 in main ../main.c:20 #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-11-20Add -Wmissing-prototypesSimon Ser
This requires functions without a prototype definition to be static. This allows to detect dead code, export less symbols and put shared functions in headers.
2019-10-22backend/drm: track gbm_bo during direct scan-outSimon Ser
We need to destroy the gbm_bo we imported and drmModeRmFb. Closes: https://github.com/swaywm/sway/issues/4662
2019-08-03backend/drm: destroy output immediatelyRouven Czerwinski
Instead of waiting for the next pageflip, destroy the output immediately since we can now handle flips for outputs which no longer exist. Also demote the missing crtc on flip to debug. Fixes #1739
2019-07-27Remove all wayland-server.h includesSimon Ser
The documentation for wayland-server.h says: > Use of this header file is discouraged. Prefer including > wayland-server-core.h instead, which does not include the server protocol > header and as such only defines the library PI, excluding the deprecated API > below. Replacing wayland-server.h with wayland-server-core.h allows us to drop the WL_HIDE_DEPRECATED declaration.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 09:45:39 +0000