aboutsummaryrefslogtreecommitdiff
path: root/backend
AgeCommit message (Collapse)Author
2021-08-25backend/drm: introduce wlr_drm_bo_handle_tableSimon Ser
Using GBM to import DRM dumb buffers tends to not work well. By using GBM we're calling some driver-specific functions in Mesa. These functions check whether Mesa can work with the buffer. Sometimes Mesa has requirements which differ from DRM dumb buffers and the GBM import will fail (e.g. on amdgpu). Instead, drop GBM and use drmPrimeFDToHandle directly. But there's a twist: BO handles are not ref'counted by the kernel and need to be ref'counted in user-space [1]. libdrm usually performs this bookkeeping and is used under-the-hood by Mesa. We can't re-use libdrm for this task without using driver-specific APIs. So let's just re-implement the ref'counting logic in wlroots. The wlroots implementation is inspired from amdgpu's in libdrm [2]. Closes: https://github.com/swaywm/wlroots/issues/2916 [1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110 [2]: https://gitlab.freedesktop.org/mesa/drm/-/blob/1a4c0ec9aea13211997f982715fe5ffcf19dd067/amdgpu/handle_table.c
2021-08-25Move allocator stuff into new directorySimon Ser
Add render/allocator/ and include/render/allocator/ to hold everything allocator-related.
2021-08-25backend/drm: generate CVT reduced modesSimon Ser
The Coordinated Video Timings (CVT) spec [1] defines two types of timings: the "CVT standard CRT" timings and the "CVT reduced blanking" timings (see section 3.6). The standard CRT timings include pauses in the video stream to allow CRT displays to reposition their electron beam at the end of each horizontal scan line [2]. While this was desirable a few decades ago, nowadays we can just generate a CVT reduced blanking timing by default. wlroots users can still set full custom DRM modes via wlr_drm_connector_add_mode. [1]: https://glenwing.github.io/docs/VESA-CVT-1.2.pdf [2]: https://en.wikipedia.org/wiki/Coordinated_Video_Timings#Reduced_blanking
2021-08-20backend/drm: try to allocate crtc for formatsRouven Czerwinski
To retrieve the formats, an allocated crtc is required. If there is no currently no crtc available, try to allocate it. This reproducable by having a disabled output and going through a suspend cycle with amdgpu. On start CRTCs look like this: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=0 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=0 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 where DP-1 is than disabled. After suspend/resume, allocation turns into: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=-1 state=1 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=3 desired_enabled=1 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=-1 state=1 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=3 desired_enabled=1 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 where the crtc for DP-1 is now NULL. Trying to enable the output results in: 10:43:36.906 [DEBUG] [sway/config/output.c:351] Turning on output DP-1 10:43:36.906 [DEBUG] [sway/config/output.c:360] Set preferred mode 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [sway/config/output.c:366] Preferred mode rejected, falling back to another mode 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000 10:43:36.907 [DEBUG] [sway/config/output.c:430] Committing output DP-1 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [ERROR] [sway/config/output.c:435] Failed to commit output DP-1 where the primary format can't be queried since there is no crtc allocated for the connector. Allocating the connector inside drm_connector_get_primary_formats() fixes this issue. This is possible since the only user of get_primary_formats() is the swapchain allocation function, which is only called on output enable. Do the same thing for the cursor formats in case the user queries them before the output is enabled.
2021-08-19backend: unify startup messagesSimon Ser
2021-08-18backend/drm: add support for FB_DAMAGE_CLIPSSimon Ser
This allows the kernel to access our buffer damage. Some drivers can take advantage of this, e.g. for PSR2 panels (Panel Self Refresh) or for transfer over USB. Closes: https://github.com/swaywm/wlroots/issues/1267
2021-08-17Revert "backend/drm: Check if output is enabled before sending frame event"Rouven Czerwinski
This reverts commit 85757665e6e1393773b36282aa244feb10b7a5fe. We now check if the output is enabled within wlr_output_send_frame, no need to handle this explicitly in the DRM backend. This also fixes a race which was introduced with this commit: if we schedule the flip, disable and commit the output before the flip happens, output.frame_pending will not be reset to false. We than always fail to enable the output subsequently: 00:07:13.276 [INFO] [sway/commands.c:257] Handling command 'output DP-2 enable' 00:07:13.276 [DEBUG] [sway/commands.c:428] Subcommand: enable 00:07:13.276 [DEBUG] [sway/config/output.c:204] Merging on top of existing output config 00:07:13.276 [DEBUG] [sway/config/output.c:227] Config stored for output DP-2 (enabled: 1) (-1x-1@-1.000000Hz position 0,0 scale -1.000000 subpixel unknown transform -1) (bg /home/phoenix/Pictures/Wallpapers/mine/oper.jpg fill) (dpms 1) (max render time: -1) 00:07:13.276 [DEBUG] [sway/config/output.c:351] Turning on output DP-2 00:07:13.276 [DEBUG] [sway/config/output.c:360] Set preferred mode 00:07:13.276 [DEBUG] [wlr] [backend/drm/drm.c:465] connector DP-2: Can't enable an output without a buffer 00:07:13.276 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 00:07:13.277 [DEBUG] [sway/config/output.c:329] Output DPI: 162.560000x161.364706 00:07:13.277 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000 00:07:13.277 [DEBUG] [sway/config/output.c:430] Committing output DP-2 00:07:13.277 [DEBUG] [wlr] [types/wlr_output.c:729] Tried to commit a buffer while a frame is pending since the basic_output_test will always fail. Reset frame_pending to false even if the output has been disabled in the meantime. Fixes https://github.com/swaywm/wlroots/issues/3109
2021-08-17backend/drm: return true on test if no crtcRouven Czerwinski
This should fix the following backtrace, seen on my desktop with one output disabled: #0 atomic_crtc_commit (conn=0x270f5c0, state=0x270f6d0, flags=0, test_only=<optimized out>) at ../backend/drm/atomic.c:178 drm = 0x1ae9c10 output = 0x270f5c0 crtc = 0x0 modeset = false active = false mode_id = 43989232 gamma_lut = 0 prev_vrr_enabled = <optimized out> vrr_enabled = <optimized out> atom = {req = 0x270f5c0, failed = 48} ok = <optimized out> #1 0x00007f1104f33128 in drm_crtc_commit (conn=conn@entry=0x270f5c0, state=state@entry=0x270f6d0, flags=flags@entry=0, test_only=test_only@entry=true) at ../backend/drm/drm.c:339 __PRETTY_FUNCTION__ = "drm_crtc_commit" drm = <optimized out> crtc = 0x0 ok = <optimized out> #2 0x00007f1104f34e6c in drm_connector_test (output=output@entry=0x270f5c0) at ../backend/drm/drm.c:488 conn = 0x270f5c0 unsupported = <optimized out> #3 0x00007f1104f35424 in drm_connector_commit (output=0x270f5c0) at ../backend/drm/drm.c:578 conn = 0x270f5c0 #4 0x00007f1104f600b7 in wlr_output_commit (output=output@entry=0x270f5c0) at ../types/wlr_output.c:837 now = {tv_sec = 7732, tv_nsec = 623813006} pre_event = {output = 0x270f5c0, when = 0x7ffecc1be570} back_buffer = 0x0 scale_updated = <optimized out> geometry_updated = <optimized out> committed = <optimized out> event = {output = 0x0, committed = 4401048, when = 0x29f38f0} #5 0x0000000000433047 in apply_output_config (oc=oc@entry=0x29f38f0, output=output@entry=0x2710720) at ../sway/config/output.c:431 wlr_output = 0x270f5c0 output_box = <optimized out> #6 0x0000000000433aaf in apply_output_config_to_outputs (oc=0x2308400) at ../sway/config/output.c:649 current = 0x29f38f0 name = <optimized out> wildcard = true id = "Dell Inc. DELL U2410 F525M9AK0MML\000\060\060\060ACD7\000\000\000\000\000\000\000\220\063\240\002\000\000\000\000L5C\000\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\355\240E\000\000\000\000\000\377\377\377\377\000\000\000\000@\206+\002\000\000\000\000`\260.\002\000\000\000" sway_output = 0x2710720 tmp = 0x2242030 seat = <optimized out> #7 0x000000000043df6b in cmd_output (argc=<optimized out>, argv=0x2a03390) at ../sway/commands/output.c:108 error = <optimized out> output = <optimized out> background = false #8 0x0000000000410304 in execute_command (_exec=_exec@entry=0x2975d20 "output * dpms off", seat=0x22a3280, seat@entry=0x0, con=con@entry=0x0) at ../sway/commands.c:291 res = <optimized out> argc = 4 argv = 0x2a03370 handler = 0x479230 <handlers+560> cmd = <optimized out> matched_delim = 0 '\000' containers = 0x0 using_criteria = false __PRETTY_FUNCTION__ = "execute_command" exec = 0x28f63c0 "output * dpms off" head = 0x0 res_list = 0x2a2e9d0 #9 0x0000000000418b65 in ipc_client_handle_command (client=client@entry=0x2a6ac80, payload_length=<optimized out>, payload_type=IPC_COMMAND) at ../sway/ipc-server.c:645 line = <optimized out> res_list = <optimized out> json = <optimized out> length = <optimized out> __PRETTY_FUNCTION__ = "ipc_client_handle_command" buf = 0x2975d20 "output * dpms off" #10 0x000000000041964c in ipc_client_handle_readable (client_fd=<optimized out>, mask=<optimized out>, data=0x2a6ac80) at ../sway/ipc-server.c:267 pending_length = <optimized out> pending_type = <optimized out> client = 0x2a6ac80 read_available = 31 buf = "i3-ipc\021\000\000\000\000\000\000" received = 14 #11 0x00007f1104fc3492 in wl_event_loop_dispatch () from /nix/store/ridk7k2ka6dbk4ly7qqjgmc523s4fj89-wayland-1.19.0/lib/libwayland-server.so.0 No symbol table info available. #12 0x00007f1104fc1135 in wl_display_run () from /nix/store/ridk7k2ka6dbk4ly7qqjgmc523s4fj89-wayland-1.19.0/lib/libwayland-server.so.0 No symbol table info available. #13 0x000000000041ac10 in server_run (server=server@entry=0x47b0c0 <server>) at ../sway/server.c:261 No locals. #14 0x000000000041a3fc in main (argc=<optimized out>, argv=0x7ffecc1bec68) at ../sway/main.c:395 verbose = 0 debug = 0 validate = 0 allow_unsupported_gpu = 0 long_options = {{name = 0x45b516 "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x45ee69 "config", has_arg = 1, flag = 0x0, val = 99}, {name = 0x45b51b "validate", has_arg = 0, flag = 0x0, val = 67}, { name = 0x45b524 "debug", has_arg = 0, flag = 0x0, val = 100}, {name = 0x45b3ac "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x45a55c "verbose", has_arg = 0, flag = 0x0, val = 86}, {name = 0x45b52a "get-socketpath", has_arg = 0, flag = 0x0, val = 112}, {name = 0x45b539 "unsupported-gpu", has_arg = 0, flag = 0x0, val = 117}, {name = 0x45b549 "my-next-gpu-wont-be-nvidia", has_arg = 0, flag = 0x0, val = 117}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} config_path = 0x0 usage = 0x45b830 "Usage: sway [options] [command]\n\n -h, --help", ' ' <repeats 13 times>, "Show help message and quit.\n -c, --config <config> Specify a config file.\n -C, --validate Check the validity of the config file, th"... c = <optimized out> where the second output is not enabled: (gdb) frame 4 #4 0x00007f1104f600b7 in wlr_output_commit (output=output@entry=0x270f5c0) at ../types/wlr_output.c:837 837 in ../types/wlr_output.c (gdb) p output->enabled $3 = false (gdb) The culprit being that since 604674dc54a3b2cb4b73de267c8c2bcae259c4b6 we always try to perform a commit, even on a disabled output.
2021-08-17backend/drm: use addon for wlr_drm_fbSimon Ser
2021-08-15input/tablet: fix `wl_array_for_each` usage on tablet proximityTudor Brindus
Looks like this instance was missed in e035f2b9c42b39e3eff37d0fe98bfa6422877d7a. Fixes #3110.
2021-08-10backend/drm: always perform a test commit in drm_connector_testSimon Ser
This allows callers to use wlr_output_test to check whether a mode can be enabled, for instance. Closes: https://github.com/swaywm/wlroots/issues/2250
2021-08-10backend/drm: add proper error handling to wlr_drm_backend_createSimon Ser
Some listeners weren't removed and caused a use-after-free with e.g. vkms when used as a secondary GPU.
2021-08-04backend/drm: require buffer on modeset in drm_connector_testSimon Ser
When testing a modeset, make sure the caller has also provided a buffer. This allows df0e75ba05e2 ("output: try skipping buffer allocation if the backend allows it") to work as expected with the DRM backend. Closes: https://github.com/swaywm/wlroots/issues/3086
2021-08-02backend/drm: preserve mode order from kernelSimon Ser
The kernel orders the mode list from highest to lowest. Preserve this ordering in the wlr_output.modes list.
2021-07-29output: drop wlr_output_state.buffer_typeSimon Ser
This is now unconditionally set to WLR_OUTPUT_STATE_BUFFER_SCANOUT.
2021-07-29backend/noop: drop attach_render/rollback_renderSimon Ser
We no longer require wlr_output_impl.{attach,rollback}_render to be populated.
2021-07-28backend/drm: fix wrong type for get_cursor_format return valuesSimon Ser
These are bools but should be pointers.
2021-07-28backend/drm: stop initializing renderer for parent backendSimon Ser
Unless we're dealing with a multi-GPU setup and the backend being initialized is secondary, we don't need a renderer nor an allocator. Stop initializing these.
2021-07-28backend/drm: drop get_renderer implementationSimon Ser
We can now just rely on the common code for this.
2021-07-28backend/drm: drop drm_surface_{make,unset}_currentSimon Ser
2021-07-28backend/drm: remove SCANOUT check in drm_connector_testSimon Ser
We only accept SCANOUT, the buffer type should never be set to RENDER.
2021-07-28backend/drm: remove primary swapchainSimon Ser
We can't nuke it completely, we still need it for multi-GPU.
2021-07-28backend/drm: allow legacy scan-out if FB props matchSimon Ser
Historically we haven't allowed direct scan-out for legacy KMS, because legacy misses the functionality to make sure a buffer can be scanned out. However with renderer v6 the backend can't figure out anymore whether the buffer comes from its internal swap-chain, because the backend doesn't have an internal swap-chain. The legacy KMS API guarantees that the driver won't reject a buffer as long as it's been allocated with the same parameters as the previous one. Let's check this in legacy_crtc_test.
2021-07-28backend/drm: implement get_primary_formatsSimon Ser
2021-07-22render/wlr_texture: put wlr_texture_from_buffer into the public APISimon Zeni
2021-07-22backend: make DRM and libinput backends optionalayaka
Co-authored-by: Simon Ser <contact@emersion.fr>
2021-07-21backend/drm: add DRM_MODE_CONNECTOR_USB to conn_get_nameSimon Ser
See 757e26712337 ("drm/uapi: Add USB connector type") in the kernel tree.
2021-07-20backend/drm: stop restoring CRTCs on exitSimon Ser
This is the cause of the spurious "drmHandleEvent failed" messages at exit. restore_drm_outputs calls handle_drm_event in a loop without checking whether the FD is readable, so drmHandleEvent ends up with a short read (0 bytes) and returns an error. The loop's goal is to wait for all queued page-flip events to complete, to allow drmModeSetCrtc calls to succeed without EBUSY. The drmModeSetCrtc calls are supposed to restore whatever KMS state we were started with. But it's not clear from my PoV that restoring the KMS state on exit is desirable. KMS clients are supposed to save and restore the (full) KMS state on VT switch, but not on exit. Leaving our KMS state on exit avoids unnecessary modesets and allows flicker-free transitions between clients. See [1] for more details, and note that with Pekka we've concluded that a new flag to reset some KMS props to their default value on compositor start-up is the best way forward. As a side note, Weston doesn't restore the CRTC by does disable the cursor plane on exit (see drm_output_deinit_planes, I still think disabling the cursor plane shouldn't be necessary on exit). Additionally, restore_drm_outputs only a subset of the KMS state. Gamma and other atomic properties aren't accounted for. If the previous KMS client had some outputs disabled, restore_drm_outputs would restore a garbage mode. [1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-19backend/drm: fix NULL data in handle_drm_eventSimon Ser
wl_event_loop_add_fd was called with a NULL data argument, but the function expects the data argument to be set to the wlr_drm_backend. Fixes: 053ebe7c278b ("backend/drm: terminate display on drmHandleEvent failure")
2021-07-13backend/wayland: properly cleanup wlr_wl_pointerSimon Ser
We were missing destroy calls for gestures, and we were only destroying the relative pointer on output destroy.
2021-07-12backend/drm: remove wlr_output_impl.export_dmabufSimon Ser
This is now provided by the generic wlr_output implementation.
2021-07-12backend/headless: remove wlr_output_impl.export_dmabufSimon Ser
This is now provided by the generic wlr_output implementation.
2021-07-09backend/drm: remove backend arg from wlr_drm_interface.crtc_commitSimon Ser
The callee can just get it from the wlr_drm_connector.
2021-07-09backend/drm: move legacy-specific checks to legacy.cSimon Ser
Now that we have a test_only arg in crtc_commit, we can move the legacy checks to legacy.c.
2021-07-09backend/drm: add test_only arg to wlr_drm_interface.crtc_commitSimon Ser
Right now callers of drm_crtc_commit need to check whether the interface is legacy or atomic before passing the TEST_ONLY flag. Additionally, the fallbacks for legacy are in-place in the common code. Add a test_only arg to the crtc_commit hook. This way, there's no risk to pass atomic-only flags to the legacy function (add an assert to ensure this) and all of the legacy-specific logic can be put back into legacy.c (done in next commit).
2021-07-08backend/drm: stop using drm_surface_make_current in drm_surface_blitSimon Ser
drm_surface_make_current and drm_surface_unset_current set implicit state and are an unnecessary mid-layer. Prefer to use directly wlr_renderer_begin_with_buffer, which automatically unsets the back buffer on wlr_renderer_end. I'd like to get rid of drm_surface_make_current once we stop using it for the primary swapchain.
2021-07-08backend/drm: force linear layout for multi-GPU buffersSimon Ser
Some buffers need to be copied across GPUs. Such buffers need to be allocated with a format and modifier suitable for both the source and the destination. When explicit modifiers aren't supported, we were forcing the buffers to be allocated with a linear layout, because implicit modifiers aren't portable across GPUs. All is well with this case. When explicit modifiers are supported, we were advertising the whole list of destination modifiers, in the hope that the source might have some in common and might be able to allocate a buffer with a more optimized layout. This works well if the source supports explicit modifiers. However, if the source doesn't, then wlr_drm_format_intersect will fallback to implicit modifiers, and everything goes boom: the source uses a GPU-specific tiling and the destination interprets it as linear. To avoid this, just force linear unconditionally. We'll be able to revert this once we have a good way to indicate that an implicit modifier isn't supported in wlr_drm_format_set, see [1]. [1]: https://github.com/swaywm/wlroots/pull/2815 Closes: https://github.com/swaywm/wlroots/issues/3030
2021-07-08Fix invalid uses of wl_array_for_eachSimon Ser
[1] and [2] have introduced new wl_array usage in wlroots, but contains a mistake: wl_array_for_each iterates over pointers to the wl_array entries, not over entries themselves. Fix all wl_array_for_each call sites. Name the variables "ptr" to avoid confusion. Found via ASan: ==148752==ERROR: AddressSanitizer: attempting free on address which was not malloc()-ed: 0x602000214111 in thread T0 #0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127 #1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24 #2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51 #3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306 #4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57 #5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57 #6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124 #7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e) #8 0x55cd1a77c9e5 in server_fini ../sway/server.c:218 #9 0x55cd1a77893f in main ../sway/main.c:400 #10 0x7f6ff04bdb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24) #11 0x55cd1a73a7ad in _start (/home/simon/src/sway/build/sway/sway+0x33a7ad) 0x602000214111 is located 1 bytes inside of 16-byte region [0x602000214110,0x602000214120) freed by thread T0 here: #0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127 #1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24 #2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51 #3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306 #4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57 #5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57 #6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124 #7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e) previously allocated by thread T0 here: #0 0x7f6ff2236279 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:145 #1 0x7f6ff1066d03 in wl_array_add (/usr/lib/libwayland-server.so.0+0xdd03) [1]: https://github.com/swaywm/wlroots/pull/3002 [2]: https://github.com/swaywm/wlroots/pull/3004
2021-07-08backend/x11: send touch frame eventsSimon Ser
2021-07-08backend/wayland: send touch frame eventsSimon Ser
2021-07-08backend/libinput: send touch frame eventsSimon Ser
2021-07-06move wlr_box from /types to /utilSimon Zeni
2021-07-05backend/drm: don't clear pending cursor FB on failed commitSimon Ser
The previous fix tried to side-step cursor->pending_fb completely. However that messes up our buffer locking mechanism. Instead, stop clearing the pending cursor FB on a failed commit. The pending cursor FB will remain for the next commit. Fixes: 6c3d080e25e5 ("backend/drm: populate cursor plane's current_fb")
2021-07-05Revert "backend/drm: populate cursor plane's current_fb"Simon Ser
This reverts commit 6c3d080e25e56404228ad7704eed43e40fa0c623. Populating wlr_drm_plane.current_fb messes up the buffer's locking. The previous buffer is released while it's still being displayed on-screen.
2021-07-05backend/libinput: use wl_array for wlr_libinput_tablet.toolsSimon Ser
Instead of using a single-field wl_list, let's just use a wl_array.
2021-07-01buffer: make enum wlr_buffer_cap publicSimon Ser
Custom backends and renderers need to implement wlr_backend_impl.get_buffer_caps and wlr_renderer_impl.get_render_buffer_caps. They can't if enum wlr_buffer_cap isn't made public.
2021-07-01tablet: stop using wlr_listSimon Ser
2021-07-01backend/libinput: stop using wlr_list internallySimon Ser
2021-07-01Remove unused wlr_list.h includesSimon Ser
2021-06-24backend/drm: rename page_flip_handler to handle_page_flipSimon Ser
This is more consistent with the rest of the wlroots naming.