| Age | Commit message (Collapse) | Author |
|---|
|
This commit implements device type discovery by calling two ioctls
(DRM_IOCTL_VERSION and EVIOCGVERSION) on the device. These iocts are
specific to drm and input devices respectively, therefore we can
determine the device type based on which one returns an error.
|
|
|
|
|
|
|
|
Fixes #1230
|
|
|
|
|
|
|
|
This commit handles better situations in which the number of
connected outputs is greater than the number of available CRTCs.
It'll enable as many outputs as possible, and transfer CRTCs to
outputs that need one on unplug.
This changes CRTC and plane reallocation to happen after scanning
DRM connectors instead of on modeset.
This cleanups CRTCs and planes on unplug to allow them to be
re-used for other outputs.
On modeset, if an output doesn't have a CRTC, the desired mode is
saved and used later when the output gains a CRTC.
Future work includes giving priority to enabled outputs over
disabled ones for CRTC allocation. This requires the compositor to
know about all outputs (even outputs without CRTCs) to properly
modeset outputs enabled in the compositor config file and disable
outputs disabled in the config file.
|
|
The VT the compositor was started from was not activated after exiting
the compositor, which resulted in arriving on a blank VT. This commit
fixes that by introducing a new field in direct_session struct that
stores the last active VT so that it can be activated in
direct_session_destroy.
|
|
|
|
|
|
I failed to see this issue with Valgrind because of the +1.
|
|
This prevents receiving modesetting requests from the compositor
while we don't have the whole picture (ie. while we haven't yet
scanned all connectors).
This also makes connectors without CRTCs disabled (they can't be
enabled yet even if some CRTCs are free'd -- this is future work).
|
|
This correctly frees CRTCs when disabling outputs without setting
a mode.
|
|
A few pedantic changes and unused variables (1-4), and genuine bugs (5,
6).
The reports with the corresponding files and lines numbers are as
follows.
1. backend/libinput/tablet_pad.c@31,44,57
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'unsigned int',
which is incompatible with sizeof operand type 'int'"
2. types/tablet_v2/wlr_tablet_v2_pad.c@371
"Allocator sizeof operand mismatch"
"Result of 'calloc' is converted to a pointer of type 'uint32_t', which
is incompatible with sizeof operand type 'int'"
3. types/wlr_cursor.c@335
"Dead initialization"
"Value stored to 'dx'/'dy' during its initialization is never read"
4. rootston/xdg_shell.c@510
"Dead initialization"
"Value stored to 'desktop' during its initialization is never read"
5. types/tablet_v2/wlr_tablet_v2_pad.c@475
"Dereference of null pointer"
"Access to field 'strips' results in a dereference of a null pointer
(loaded from field 'current_client')"
The boolean logic was incorrect (c.f. the check in the following
function).
6. examples/idle.c@163,174,182
"Uninitialized argument value"
"1st function call argument is an uninitialized value"
If close_timeout != 0, but simulate_activity_timeout >= close_timeout,
the program would segfault at pthread_cancel(t1).
|
|
The major device number does not indicate the device type on FreeBSD,
and AFAIK the only way to differentiate between DRM, input, and other
devices is checking the fd path. This commit implements that.
The drmDropmaster and drmSetmaster calls are necessary, because the
implicit drop (that should occur when the DRM fd is closed) seems not
to be working in some scenarios (e.g. if you have a tmux session
running - maybe the fd is retained somehow by tmux?). This is a
problem, because once you exit the compositor, you can't start it (or
any other program that wants to be DRM master) again until you close
all your tmux sessions.
|
|
It doesn't look like there's any motion on a fix from the AMDGPU side,
and using the legacy interface for this isn't so bad.
|
|
|
|
|
|
This reverts commit 9c886f20b97b6ab1ac85b849f1fe7f16eb199ff0.
|
|
This breaks wlroots when used as a meson subproject.
This reverts commit dea311992eb4ff3e343c3cf5b0603034223d2a42, reversing
changes made to 6db9c4b74667c1d917d720f5e96985a2461569fb.
|
|
|
|
We now use a combo choice between systemd/elogind as they are mutually
exclusive anyway.
|
|
|
|
Fix build on FreeBSD
|
|
|
|
Set the window width and height, not the location of the window.
|
|
Events that set the window to either a width or height of zero are now
ignored and logged.
|
|
Fixes issue #1170
Also set the created window size to match the output size.
|
|
On some systems (most notably laptops with two GPUs) there are GPUs that
don't have attached outputs. However, we still want to load those GPUs
because they could still be used by the compositor for rendering.
|
|
This will indicate the user properly when multi-GPU is not supported by
their GPU driver.
|
|
These aren't used anymore and crashes when the gbm_bo tries to get
destroyed (e.g. on hotplug).
|
|
Create rendering resources on parent GPU, so that we can sample the
passed in texture properly. The cursor buffer needs to remain on the
same GPU.
|
|
All screens on secondary GPU in multiple GPU configurations
was flipped 180.
The flipped screens was always on secondary card (the primary card
was always correct).
Tested on nouveau with:
WLR_DRM_DEVICES=/dev/dri/card1:/dev/dri/card2
WLR_DRM_DEVICES=/dev/dri/card2:/dev/dri/card1
The commit is fixing this problem. Now all screens are "normal".
|
|
backend_get_renderer() is now returning the renderer of the primary GPU, instead
of its own renderer, since that's the thing which actually does all of the "real"
rendering
wlr_multi_backend_add() is now adding all subbackends (otherwise only one GPU
is handled).
credits: @ascent12
|
|
|
|
|
|
|
|
This reverts commit ef0a6ea4d2934ec014d791150c42348061ec4f7f, reversing
changes made to 8d03bc9178d8544cbcd24293ece6ac9f1698e602.
|
|
|
|
|
|
The previous naming was based on the input-device capability names from
libinput.
With code that uses the libinput_tablet_tool and mapping into tablet-v2,
this is confusing, so the name is changed to follow the names used in
the protocol.
|
|
|
|
|
|
|
|
|
|
Rename make_ functions to _create
Implement set_cursor and set_feedback
|
|
|
|
|
