aboutsummaryrefslogtreecommitdiff
path: root/backend/x11/output.c
AgeCommit message (Collapse)Author
2021-04-20backend/x11: add support for shm buffersTadeo Kondrak
2021-04-06backend/x11: reject DMA-BUFs with flagsSimon Ser
We cannot scan-out DMA-BUFs with any flag right now.
2021-03-11output: fix transform matrix for 90/270 rotationsSimon Ser
We need to adjust the second translation depending on the transform we applied. Fixes: 9601a2abf024 ("output: improve transform matrix calculation" Closes: https://github.com/swaywm/wlroots/issues/2774
2021-03-10output: improve transform matrix calculationSimon Zeni
Compute only the transform matrix in the output. The projection matrix will be calculated inside the gles2 renderer when we start rendering. The goal is to help the pixman rendering process.
2021-03-09backend/x11: clamp hotspot to texture boundsIlia Mirkin
When a new texture is set, the hotspot may actually belong to the previous texture and be out of bounds. Rather than incur X errors for these, clamp the hotspot to be inside of the texture. This fixes weston examples updating their cursors (e.g. weston-eventdemo).
2021-02-23render: use DRM formats in wlr_renderer_read_pixelsSimon Ser
2021-02-18backend: add error messages in attach_render implsSimon Ser
2021-02-05backend/x11: use native cursorsIlia Mirkin
Fixes #2659
2021-01-28backend/x11: remove output_set_refreshSimon Ser
The X11 backend uses the Present extension to schedule frames. The refresh rate is unused.
2021-01-21backend/x11: keep track of exposed rects, add them to damage regionsIlia Mirkin
When we receive an Expose event, that means that we must redraw that region of the X11 window. Keep track of these regions with pixman regions, and merge them with the additional output damaged regions. Fixes #2670
2021-01-21backend/x11: add support for scanout modeIlia Mirkin
This makes full-screen with weston-terminal work.
2021-01-20backend/x11: make sure output transform matrix is initializedIlia Mirkin
The transform matrix was all 0's, which meant that effectively nothing got rendered other than the clear color.
2021-01-18backend/x11: fix region not being actually usedSimon Ser
The region variable was shadowed in an if block. As a result, in the outer block region was always XCB_NONE and was never destroyed (causing a memory leak on the server). Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
2021-01-18backend/x11: set a blank cursor rather than hiding globallyIlia Mirkin
This actually simplifies the logic since we no longer have to wait for enter/leave events, and also improves the UX when e.g. handling a crash with gdb attached. See #2659
2021-01-17backend/x11: add xcb_dri3_pixmap_from_buffers check for n_planesSimon Ser
Just in case.
2021-01-17backend/x11: add support for DRI3 1.0Simon Ser
Add fallbacks when DRI3 1.2 isn't supported. Closes: https://github.com/swaywm/wlroots/issues/2586
2021-01-16render/gles2: make EGL context current in bind_bufferSimon Ser
Instead of requiring callers to manually make the EGL context current before binding a buffer and unsetting it after unbinding a buffer, do it inside wlr_renderer_bind_buffer. This hides renderer-specific implementation details inside the wlr_renderer interface. Non-GLES2 renderers may not use EGL. This removes all EGL dependencies from the backends. References: https://github.com/swaywm/wlroots/issues/2618 References: https://github.com/swaywm/wlroots/pull/2615#issuecomment-756687006
2021-01-16render: remove egl include from wlr_rendererSimon Zeni
2021-01-12render/egl: remove surface and buffer age args from make_currentSimon Ser
These aren't used anymore.
2021-01-07backend: remove wlr_egl from all backendsSimon Zeni
2020-12-28backend/x11: create per-window present event contextsSimon Ser
The Present protocol states: > An event context is associated with a specific window; using an existing > event context with a different window generates a Match error. Instead of a global event context, use a per-window event context to fix this error: [backend/x11/backend.c:608] X11 error: op Present (SelectInput), code Match (no extension), sequence 63, value 4194307 Closes: https://github.com/swaywm/wlroots/issues/2577
2020-12-27backend/x11: implement a real rendering loopSimon Ser
Instead of using a timer, rely on X11 Present events and send a new frame event when the parent compositor displays a new frame on screen. The previous attempt at doing this [1] hit issues with EGLSurface, but we don't use that anymore. [1]: https://github.com/swaywm/wlroots/pull/1894
2020-12-21backend/x11: destroy buffers when destroying outputSimon Ser
2020-12-21backend/x11: re-use pixmapsSimon Ser
Instead of re-importing a buffer each time we submit a frame, re-use the pixmaps if possible.
2020-12-18backend/x11: send more precise output present eventsSimon Ser
Instead of sending dummy output present events, use the X11 Present extension to send more precise events.
2020-12-13backend/x11: fix xinput mask mixed up with presentSimon Ser
Don't mix xinput and present flags. Fixes: d79a00bf0208 ("backend/x11: switch to wlr_swapchain")
2020-12-13backend/x11: switch to wlr_swapchainSimon Ser
2020-06-19output: rename impl->rollback to rollback_renderSimon Ser
The output backend API is now mostly state-less thanks to the atomic hooks (commit and test). There is one exception though: attach_render. This function makes the rendering context current. However sometimes the compositor might decide not to render after attach_render (e.g. when there's nothing new to render to the back buffer). Thus wlr_output_rollback has been introduced to revert the pending state. Because the output backend API is mostly state-less, the only thing wlr_output_impl.rollback needs to do is revert the current rendering context. Rename the function to rollback_render to make this clear. Add a check in the common wlr_output code to only call rollback_render when attach_buffer has been previously called. On the long term, we'll be able to remove attach_render and rollback_render together.
2020-05-20render/egl: unset current context after swapping buffersSimon Ser
After swapping buffers, it doesn't make sense to perform more rendering operations. Unset the context to reflect this. This commit makes it so the context is always only current between wlr_egl_make_current and wlr_egl_swap_buffers. This is an alternative to [1]. [1]: https://github.com/swaywm/wlroots/pull/2212
2020-05-19render/egl: introduce wlr_egl_unset_currentSimon Ser
This function can be called after wlr_egl_make_current to cleanup the EGL context. This avoids having lingering EGL contexts that make things work by chance. Closes: https://github.com/swaywm/wlroots/issues/2197
2020-04-08Add wlr_output_impl.rollbackSimon Ser
Most of the pending output state is not forwarded to the backend prior to an output commit. For instance, wlr_output_set_mode just stashes the mode without calling any wlr_output_impl function. wlr_output_impl.commit is responsible for applying the pending mode. However, there are exceptions to this rule. The first one is wlr_output_attach_render. It won't go away before renderer v6 is complete, because it needs to set the current EGL surface. The second one is wlr_output_attach_buffer. wlr_output_impl.attach_buffer is removed in [1]. When wlr_output_rollback is called, all pending state is supposed to be cleared. This works for all the state except the two exceptions mentionned above. To fix this, introduce wlr_output_impl.rollback. Right now, the backend resets the current EGL surface. This prevents GL commands from affecting the output after wlr_output_rollback. This patch is required for FBO-based outputs to work properly. The compositor might be using FBOs for its own purposes [2], having leftover FBO state can have bad consequences. [1]: https://github.com/swaywm/wlroots/pull/2097 [2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08backend: reset EGL surface after buffer swapSimon Ser
This prevents GL commands to affect a previously current EGL surface after a buffer swap.
2020-04-08output: introduce wlr_output_testSimon Ser
2020-03-06backend/x11: add support for adaptive_sync_enabledSimon Ser
This sets the _VARIABLE_REFRESH window property [1]. [1]: https://gitlab.freedesktop.org/mesa/mesa/blob/0616b7ac90cf4f86bb409d34101e3a3cceac8cbe/src/vulkan/wsi/wsi_common_x11.c#L1374
2019-12-30output: re-introduce atomic mode, enabled, scale and transformSimon Ser
This reverts commit 01f903874b7e27539488fad7f31476d5bcbc6ac9 and re-applies commit ee5f98ad49fed0439f3313ec685307831d1d1d05. Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue) See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR) See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates) See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates) See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-29output: add descriptionSimon Ser
wlr_output.description is a string containing a human-readable string identifying the output. Compositors can customise it via wlr_output_set_description, for instance to make the name more user-friendly. References: https://github.com/swaywm/wlroots/issues/1623
2019-11-19backend/x11: Revert usage of present extensionScott Anderson
This reverts commit 3317134adff0ed179e0ecaea6d778dbd0684f771. This reverts commit a3c3b928a3814f1a44babf487b1508415958c721. There are some serious issues when running this on a real X server, as opposed to running this on Xwayland, where this was tested. More investigation needs to be done into why these issues happen and if our usage of the present extension is correct.
2019-11-02backend/x11: Give X11 a real rendering loopScott Anderson
Makes use of the present extension to get notified of vsync, and not require any stupid timer hacks. Also make use of the present version of ConfigureNotify, because why not?
2019-08-07Revert "output: atomic mode"Rouven Czerwinski
This reverts commit ee5f98ad49fed0439f3313ec685307831d1d1d05. This intoduced problems where outputs could not be turned off because they had flips pending.
2019-08-02output: atomic mode, enabled, scale and transformSimon Ser
This commit makes more output properties (mode, enabled, scale and transform) atomic. This means that they are double-buffered and only applied on commit. Compositors now need to call wlr_output_commit after setting any of those properties. Internally, backends still apply properties sequentially. The behaviour should be exactly the same as before. Future commits will update some backends to take advantage of the atomic interface. Some backends are non-atomic by design, e.g. the X11 backend or the legacy DRM backend. Updates: https://github.com/swaywm/wlroots/issues/1640
2019-07-17backends/x11: Touch supportSebastian Krzyszkowiak
Closes #1749
2019-06-16output: remove wlr_output_impl.transformSimon Ser
The backend doesn't need to handle transform changes, since everything is done in software. In fact, all of the implementations were all identical and just set the transform. We could add support for hardware transforms, but: - This would require a different field (something like hardware_transform) - Not all combinations are possible because there often are hardware limitations - The Wayland protocol isn't ready for this (in particular xdg-output, see [1]) This belongs to a different patch series anyway. [1]: https://patchwork.freedesktop.org/series/52324/
2019-04-23output: refactor backend APISimon Ser
This updates the backend part of the output API. This is mostly renaming: make_current becomes attach_render and swap_buffers becomes commit. This also fixes the RDP backend to support NULL damage.
2019-04-08backend: unbreak on 32-bit architecturesJan Beich
backend/headless/output.c:132:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] ++backend->last_output_num); ^~~~~~~~~~~~~~~~~~~~~~~~~~ backend/noop/output.c:72:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] ++backend->last_output_num); ^~~~~~~~~~~~~~~~~~~~~~~~~~ backend/wayland/output.c:294:3: error: format specifies type 'unsigned long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] ++backend->last_output_num); ^~~~~~~~~~~~~~~~~~~~~~~~~~ backend/x11/output.c:150:3: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] ++x11->last_output_num); ^~~~~~~~~~~~~~~~~~~~~~
2019-03-15backend/x11: improve output number handlingBrian Ashworth
This improves the way the output numbers are handled for the x11 backend. Instead of using the number of active outputs plus one, the last used number is stored and new outputs will increment it. This fixes the situation where you start with one output, create a second, close the first, and create a third. Without this, both outputs will be X11-2, which causes an issue since the identifier will also be identical. With this, the last output is X11-3 and the outputs can be distinguished.
2019-01-24backend/x11 & backend/wayland: make set_title NULL-safeJente Hidskes
Set the default "wlroots - " title when the title argument to the set_title functions is NULL. Otherwise, for at least the Wayland backend, we'd crash because xdg_toplevel_set_title doesn't handle a NULL pointer.
2019-01-20Add wlr_x11_output_set_titleJente Hidskes
2018-11-13backend/x11: Hide cursor with XfixesScott Anderson
2018-11-13backend/x11: Remove old input functionsScott Anderson
This also allows us to remove xcb-xkb, since Xinput will now give us the appropriate XKB modifiers with each event.
2018-11-13backend/x11: Add new Xinput eventsScott Anderson
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 12:14:57 +0000