aboutsummaryrefslogtreecommitdiff
path: root/backend/drm
AgeCommit message (Collapse)Author
2023-08-16backend/drm: Use output state to set init modeAlexander Orzechowski
2023-08-16backend/drm: Move output variable up in connect_drm_connectorAlexander Orzechowski
2023-08-16output: Add initialization state to wlr_output_initAlexander Orzechowski
2023-07-26backend/drm: restore custom modesSimon Ser
We were only restoring fixed modes here. The DRM backend no longer creates fixed modes when the compositor sets a custom mode, so we need to handle this situation when restoring. Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3698
2023-07-14backend/drm: stop checking for wlr_client_bufferSimon Ser
wlr_client_buffer is a bad indicator for direct scan-out. Compositors might use the underlying wlr_buffer instead.
2023-07-11Use wl_container_of() instead of castsSimon Ser
This slightly improves type safety. The culprits were found with: git grep -E '\([a-z0-9_ ]+ \*\)\W?[a-z]'
2023-07-07Use struct initializers instead of memset()Simon Ser
This is a bit more type-safe.
2023-06-30backend/drm: use panel_orientation if it is setClayton Craft
This fixes an issue where the panel_orientation parameter was set but wlroots was ignoring it and returning OUTPUT_TRANSFORM_NORMAL. Fixes 2e12de96
2023-06-30backend/drm: handle output layer damageSimon Ser
2023-06-27output: Set output mode during main commitAlexander Orzechowski
Removes duplication across all the backends to finally apply the mode to the output.
2023-06-27backend/drm: Don't add pollute fixed modes list with custom modesAlexander Orzechowski
Nobody remembers why this is done and it isn't that great if people use a lot of custom modes.
2023-06-26backend/drm: remove duplicate needs_frame() in set_cursor()Simon Ser
wlr_output_update_needs_frame() is called unconditionally at the end of the function already.
2023-06-23output: add wlr_output_state_init()Simon Ser
This changes the semantics of wlr_output_state. Instead of having fields with uninitialized memory when missing from the committed bitflag, all fields are always initialized (and maybe NULL/empty), just like we do in wlr_surface_state. This reduces the chances of footguns when reading a field, and removes the need to check for the committed bitfield everywhere. A new wlr_output_state_init() function takes care of initializing the Pixman region.
2023-06-22backend/drm: fix libliftoff_plane double-freeSimon Ser
Destroying the liftoff_device invalidates all of the liftoff_planes. Destroy the liftoff_planes before the liftoff_device to fix this.
2023-06-21backend/drm: Fix typoAlexander Orzechowski
2023-06-19backend/drm: Use texture blend_mode for multigpu blitAlexander Orzechowski
2023-06-12backend/drm: clip FB damageSimon Ser
The kernel complains when the damage exceeds the FB bounds: [73850.448326] i915 0000:00:02.0: [drm:drm_atomic_check_only] [PLANE:31:plane 1A] invalid damage clip 0 0 2147483647 2147483647 Make the DRM backend behave like the Wayland one and allow compositors to damage (0, 0, INT32_MAX, INT32_MAX) to repaint everything without needing to know the exact buffer size. Closes: https://github.com/swaywm/sway/issues/7632
2023-06-05add render timer APIRose Hudson
Based on five calls: wlr_render_timer_create - creates a timer which can be reused across frames on the same renderer wlr_renderer_begin_buffer_pass - now takes a timer so that backends can record when the rendering starts and finishes wlr_render_timer_get_time - should be called as late as possible so that queries can make their way back from the GPU wlr_render_timer_destroy - self-explanatory The timer is exposed as an opaque `struct wlr_render_timer` so that backends can store whatever they want in there.
2023-05-31backend/drm: introduce wlr_drm_mode_get_info()Simon Ser
This allows compositors to get back the raw drmModeModeInfo and look at DRM-specific fields and flags.
2023-05-30backend/drm: use new rendering APISimon Ser
2023-05-17drm_plane_pick_render_format: return false if no format could be foundAustin Shafer
Commit 90d08f8f1c40e2a302d62052435ff2abdb08a854 changed the way wlr_drm_format_intersect worked, including passing in a destination format list. This breaks scenarios where the intersection doesn't find any matching formats, since we still have a valid destination format set. This changes it to only return true if more than one matching format is present in the intersection list.
2023-05-11wlr_drm_format_set: Store formats on arrayAlexander Orzechowski
2023-05-11wlr_drm_format: Rework wlr_drm_format_intersectAlexander Orzechowski
Now it takes a reference to a destination format
2023-05-11wlr_drm_format: Introduce drm_format_finishAlexander Orzechowski
2023-05-08backend/drm: fix di_info memory leakzhoulei
2023-04-20output-layer: add cropping supportSimon Ser
Add a src_box state field. Use the SRC_* KMS props in the DRM backend, reject the layers in the Wayland backend (for now, we can support it later via viewporter).
2023-04-04output-layer: add support for scaling buffersSimon Ser
This allows callers to set a destination size different from the buffer size to scale them. The DRM backend supports this. The Wayland backend doesn't yet (we'd need to wire up viewporter).
2023-03-20backend/drm: log drm_connector_alloc_crtc() failuresSimon Ser
Helps figuring out why e.g. get_primary_formats fails.
2023-02-28backend/drm: use libdisplay-info for CVT mode generationSimon Ser
2023-02-28backend/drm: use libdisplay-info to parse EDIDSimon Ser
2023-02-21render/swapchain: make publicSimon Ser
We've had this struct for a while. It'd be useful for compositors if they want to manage the swap chains themselves instead of being forced to use wlr_output's. Some compositors might also want to use a swapchain without an output.
2023-02-21backend/drm: drop wlr_drm_layer.pending_{width,height}Simon Ser
No need to store this info in struct wlr_drm_layer. We can just extract the size when we need it.
2023-02-21backend/drm: drop unnecessary pixman_region32_t castsSimon Ser
The Pixman API now accepts const parameters.
2023-02-20backend/drm: send output layer feedback eventsSimon Ser
2023-02-20backend/drm: add support for output layersSimon Ser
2023-02-20backend/drm: add libliftoff composition layerSimon Ser
This will be useful for implementing the output layers API.
2023-02-20backend/drm: add libliftoff interfaceSimon Ser
2023-02-20backend/drm: init wlr_drm_plane for all plane typesSimon Ser
2023-02-02backend/drm: require hwdata pkg-config fileSimon Ser
The hardcoded fallback "/usr/share/hwdata/pnp.ids" was only a temporary solution to get things working while distributions were still working on shipping it.
2023-01-31backend/drm: set "max bpc" property based on pixel formatSimon Ser
Since 1d581656c756 ("backend/drm: set "max bpc" to the max") we set the "max bpc" property to the maximum value. The kernel driver is supposed to clamp this value depending on hardware capabilities. All kernel drivers lower the value depending on the GPU capabilities. However, none of the drivers lower the value depending on the DP-MST link capabilities. Thus, enabling a 4k@60Hz mode can fail on some DP-MST setups due to the "max bpc" property. Additionally, it's not a good idea to unconditionally set "max bpc" to the max. A high bpc consumes more lanes and more clock speed, which means higher power consumption and the busy lanes cannot be used for something else (e.g. other data transfers on a USB-C cable). For now, let's tie the "max bpc" to the pixel format of the buffer. Introduce a heuristic to make "high bit-depth buffer" a synonym of "I want the best quality". This is not perfect: a "max bpc" higher than 8 might be desirable for pixel formats with a color depth of 8 bits, for instance when the color management KMS properties are used. But we don't really support that yet, so let's leave this for later. Closes: https://github.com/swaywm/sway/issues/7367
2023-01-18backend/drm: disable all CRTCs after VT switchSimon Ser
When the user switches away from the VT where wlroots is running, the new DRM master may mutate the KMS state in an arbitrary manner. For instance, let's say wlroots uses the following connector/CRTC mapping: - CRTC 42 drives connector DP-1 - CRTC 43 drives connector DP-2 Then the new DRM master may swap the mapping like so: - CRTC 42 drives connector DP-2 - CRTC 43 drives connector DP-1 wlroots needs to restore its own state when the user switches back. Some state is attached to wlr_drm_crtc (e.g. current FB), so reading back and adopting the CRTC/connector mapping left by the previous DRM master would be complicated (this was the source of other bugs in the past, see [1]). With the previous logic, wlroots merely tries to restore the state of each connector one after the other. This fails in the scenario described above: the kernel refuses to use CRTC 42 for DP-1, because that CRTC is already in-use for DP-2. Unfortunately with the legacy uAPI it's not possible to restore the state in one go. We need to support both legacy and atomic uAPIs, so let's fix the bug for the legacy uAPI first, and then improve the situation for the atomic uAPI as a second step [2]. We need to disable the CRTCs we're going to switch the connectors for. This sounds complicated, so let's just disable all CRTCs to simplify. This causes a black screen because of the on/off modesets, but makes VT switch much more reliable, so I'll take it. [1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/commit/c6d8a11d2c438d514473b1cbe20e5550e7227472 [2]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3794 Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3342
2022-12-16backend/drm: check return value of get_drm_{connector,crtc}_props()Simon Ser
We already do it for get_drm_plane_props().
2022-12-15backend/drm: remove wlr_drm_crtc.legacy_crtcSimon Ser
We only need it for one thing: gamma size. Moreover, some bits in the drmModeCrtc will become out-of-date, for instance the current mode, so let's avoid caching the whole struct and only keep what we know won't change.
2022-12-15backend/drm: fetch fresh legacy CRTC in connector_get_current_mode()Simon Ser
connect_drm_connector() may be called long after create_drm_connector(). During that time the DRM mode might have changed. Avoid working with stale information.
2022-12-13backend/drm: drop unused arg in connector_get_current_mode()Simon Ser
2022-12-13backend/drm: prevent out-of-bounds array access on unknown subpixelSimon Ser
If the kernel adds new enum entries for subpixel, don't read past the end of the subpixel_map array.
2022-12-13backend/drm: refuse to switch CRTC for enabled connectorSimon Ser
match_obj() might return a configuration where the CRTC for an enabled connector is switched to another one. We don't support this correctly: the wlr_output common code would need to query again the supported formats, re-allocate the swapchain, etc. What's more, the kernel doesn't even support this [1]: it requires planes to be disabled to change their CRTC, it rejects commits directly switching the CRTC used by a plane. [1]: https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_atomic.c?h=6e90293618ed476d6b11f82ce724efbb9e9a071b#n697
2022-12-13backend/drm: rename wlr_drm_backend.outputs to connectorsSimon Ser
This list contains wlr_drm_connector entries, and there is no guarantee that the wlr_output fields are initialized.
2022-12-13backend/drm: clear pending cursor FB in drm_connector_commit_state()Simon Ser
Ensure we unlock any pending cursor FB when disabling a connector.
2022-12-13backend/drm: update wlr_drm_connnector.crtc in drm_connector_commit_state()Simon Ser
If the commit fails, then our local state becomes out-of-sync with the kernel's. Additionally, when disabling a connector without going through dealloc_crtc(), conn->crtc would still be set. Fix this by updating conn->crtc in drm_connector_commit_state().
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:31:52 +0000