aboutsummaryrefslogtreecommitdiff
path: root/backend/drm
AgeCommit message (Collapse)Author
2023-05-11wlr_drm_format: Introduce drm_format_finishAlexander Orzechowski
2023-05-08backend/drm: fix di_info memory leakzhoulei
2023-04-20output-layer: add cropping supportSimon Ser
Add a src_box state field. Use the SRC_* KMS props in the DRM backend, reject the layers in the Wayland backend (for now, we can support it later via viewporter).
2023-04-04output-layer: add support for scaling buffersSimon Ser
This allows callers to set a destination size different from the buffer size to scale them. The DRM backend supports this. The Wayland backend doesn't yet (we'd need to wire up viewporter).
2023-03-20backend/drm: log drm_connector_alloc_crtc() failuresSimon Ser
Helps figuring out why e.g. get_primary_formats fails.
2023-02-28backend/drm: use libdisplay-info for CVT mode generationSimon Ser
2023-02-28backend/drm: use libdisplay-info to parse EDIDSimon Ser
2023-02-21render/swapchain: make publicSimon Ser
We've had this struct for a while. It'd be useful for compositors if they want to manage the swap chains themselves instead of being forced to use wlr_output's. Some compositors might also want to use a swapchain without an output.
2023-02-21backend/drm: drop wlr_drm_layer.pending_{width,height}Simon Ser
No need to store this info in struct wlr_drm_layer. We can just extract the size when we need it.
2023-02-21backend/drm: drop unnecessary pixman_region32_t castsSimon Ser
The Pixman API now accepts const parameters.
2023-02-20backend/drm: send output layer feedback eventsSimon Ser
2023-02-20backend/drm: add support for output layersSimon Ser
2023-02-20backend/drm: add libliftoff composition layerSimon Ser
This will be useful for implementing the output layers API.
2023-02-20backend/drm: add libliftoff interfaceSimon Ser
2023-02-20backend/drm: init wlr_drm_plane for all plane typesSimon Ser
2023-02-02backend/drm: require hwdata pkg-config fileSimon Ser
The hardcoded fallback "/usr/share/hwdata/pnp.ids" was only a temporary solution to get things working while distributions were still working on shipping it.
2023-01-31backend/drm: set "max bpc" property based on pixel formatSimon Ser
Since 1d581656c756 ("backend/drm: set "max bpc" to the max") we set the "max bpc" property to the maximum value. The kernel driver is supposed to clamp this value depending on hardware capabilities. All kernel drivers lower the value depending on the GPU capabilities. However, none of the drivers lower the value depending on the DP-MST link capabilities. Thus, enabling a 4k@60Hz mode can fail on some DP-MST setups due to the "max bpc" property. Additionally, it's not a good idea to unconditionally set "max bpc" to the max. A high bpc consumes more lanes and more clock speed, which means higher power consumption and the busy lanes cannot be used for something else (e.g. other data transfers on a USB-C cable). For now, let's tie the "max bpc" to the pixel format of the buffer. Introduce a heuristic to make "high bit-depth buffer" a synonym of "I want the best quality". This is not perfect: a "max bpc" higher than 8 might be desirable for pixel formats with a color depth of 8 bits, for instance when the color management KMS properties are used. But we don't really support that yet, so let's leave this for later. Closes: https://github.com/swaywm/sway/issues/7367
2023-01-18backend/drm: disable all CRTCs after VT switchSimon Ser
When the user switches away from the VT where wlroots is running, the new DRM master may mutate the KMS state in an arbitrary manner. For instance, let's say wlroots uses the following connector/CRTC mapping: - CRTC 42 drives connector DP-1 - CRTC 43 drives connector DP-2 Then the new DRM master may swap the mapping like so: - CRTC 42 drives connector DP-2 - CRTC 43 drives connector DP-1 wlroots needs to restore its own state when the user switches back. Some state is attached to wlr_drm_crtc (e.g. current FB), so reading back and adopting the CRTC/connector mapping left by the previous DRM master would be complicated (this was the source of other bugs in the past, see [1]). With the previous logic, wlroots merely tries to restore the state of each connector one after the other. This fails in the scenario described above: the kernel refuses to use CRTC 42 for DP-1, because that CRTC is already in-use for DP-2. Unfortunately with the legacy uAPI it's not possible to restore the state in one go. We need to support both legacy and atomic uAPIs, so let's fix the bug for the legacy uAPI first, and then improve the situation for the atomic uAPI as a second step [2]. We need to disable the CRTCs we're going to switch the connectors for. This sounds complicated, so let's just disable all CRTCs to simplify. This causes a black screen because of the on/off modesets, but makes VT switch much more reliable, so I'll take it. [1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/commit/c6d8a11d2c438d514473b1cbe20e5550e7227472 [2]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3794 Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3342
2022-12-16backend/drm: check return value of get_drm_{connector,crtc}_props()Simon Ser
We already do it for get_drm_plane_props().
2022-12-15backend/drm: remove wlr_drm_crtc.legacy_crtcSimon Ser
We only need it for one thing: gamma size. Moreover, some bits in the drmModeCrtc will become out-of-date, for instance the current mode, so let's avoid caching the whole struct and only keep what we know won't change.
2022-12-15backend/drm: fetch fresh legacy CRTC in connector_get_current_mode()Simon Ser
connect_drm_connector() may be called long after create_drm_connector(). During that time the DRM mode might have changed. Avoid working with stale information.
2022-12-13backend/drm: drop unused arg in connector_get_current_mode()Simon Ser
2022-12-13backend/drm: prevent out-of-bounds array access on unknown subpixelSimon Ser
If the kernel adds new enum entries for subpixel, don't read past the end of the subpixel_map array.
2022-12-13backend/drm: refuse to switch CRTC for enabled connectorSimon Ser
match_obj() might return a configuration where the CRTC for an enabled connector is switched to another one. We don't support this correctly: the wlr_output common code would need to query again the supported formats, re-allocate the swapchain, etc. What's more, the kernel doesn't even support this [1]: it requires planes to be disabled to change their CRTC, it rejects commits directly switching the CRTC used by a plane. [1]: https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_atomic.c?h=6e90293618ed476d6b11f82ce724efbb9e9a071b#n697
2022-12-13backend/drm: rename wlr_drm_backend.outputs to connectorsSimon Ser
This list contains wlr_drm_connector entries, and there is no guarantee that the wlr_output fields are initialized.
2022-12-13backend/drm: clear pending cursor FB in drm_connector_commit_state()Simon Ser
Ensure we unlock any pending cursor FB when disabling a connector.
2022-12-13backend/drm: update wlr_drm_connnector.crtc in drm_connector_commit_state()Simon Ser
If the commit fails, then our local state becomes out-of-sync with the kernel's. Additionally, when disabling a connector without going through dealloc_crtc(), conn->crtc would still be set. Fix this by updating conn->crtc in drm_connector_commit_state().
2022-12-13backend/drm: print stringified connector status in realloc_crtcs()Simon Ser
The raw enum value wasn't informative enough. It's not trivial to tell whether 0 means connected or disconnected. Drop the status from the state after realloc, since the exact same information is printed right above.
2022-12-13backend/drm: add drm_connector_status_str()Simon Ser
Helper to stringify a connector status.
2022-12-07backend/drm: store pending FB in stateSimon Ser
Instead of having a pending_fb field on the struct wlr_drm_plane, move it to struct wlr_drm_connector_state. That way, there's no risk having a stale pending FB around: the state doesn't survive across tests and commits. The cursor is a special case because it's disconnected from the atomic state: the wlr_backend_impl.set_cursor hook sets the cursor for the next commit. Move the field to wlr_drm_connector.cursor_pending_fb.
2022-12-07backend/drm: use separate field to store pending cursor FBSimon Ser
We'll move the pending primary FB into the connector state in the next commit, dropping wlr_drm_plane.pending_fb in the process. Introduce a dedicated field for the cursor, which has to be managed in a special way due to our set_cursor API.
2022-12-07backend/drm: pass fb as arg in set_plane_props()Simon Ser
plane_get_next_fb() will go away in subsequent commits. Primary and cursor will differ with the new logic. Let's prepare for this.
2022-12-07backend/drm: stop using goto in set_plane_props()Simon Ser
We only have one error code-path, no need for goto here.
2022-12-07backend/drm: simplify dealloc_crtc() commitSimon Ser
No need to manually call drm_connector_state_init() here, we can just let drm_connector_commit_state() handle it.
2022-12-07backend/drm: fix VRR testSimon Ser
We were calling drm_connector_supports_vrr() before drm_connector_alloc_crtc(). Thus, when an output is currently off, the VRR test would always fail, because it checks that the vrr_enabled CRTC prop exists.
2022-11-25backend/session: make optionalSimon Ser
Some compositors are not interested in wlr_session, for instance nested compositors. Disabling wlr_session removes the udev dependency.
2022-11-17backend/drm: don't damage output on CRTC changeSimon Ser
There's no reason why the output should be damaged here. The current buffer doesn't need to be re-painted.
2022-11-17output: call wlr_output_update_enabled() after commitSimon Ser
Backends no longer need to manually call wlr_output_update_enabled() in their commit hook: wlr_output will take care of that.
2022-11-15backend/drm: only request page-flip if activeSimon Ser
It doesn't make sense to request a page-flip for a disabled output. Fixes: 84e727daae67 ("backend/drm: request page-flip event on modeset") Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3528
2022-11-15backend/drm: fix FPE when disabling outputSimon Ser
Fixes: 65836ce357e4 ("backend/drm: log modesetting commits") Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3534
2022-11-14backend/drm: log modesetting commitsSimon Ser
2022-11-14backend/drm: log refresh rate in HzSimon Ser
2022-11-11backend: remove const casts for pixman_region32_tSimon Ser
Pixman 0.42.0 has constified APIs for pixman_region32_t. We no longer need the casts.
2022-11-11backend/drm: ensure disconnected outputs are disabled after VT switchSimon Ser
The following situation can be dangerous: - Output DP-1 is plugged in, compositor enables it. - User VT switches away. - User unplugs DP-1. - User VT switches back. - scan_drm_connectors() figures out the output is now disconnected, uninitializes the struct wlr_output. - The loop restoring previous output state in handle_session_active() accesses the struct wlr_output to figure out what to restore. By chance, we zero out the struct wlr_output after uninitializing it, so enabled and current_mode will always be zero. But let's make sure we handle this case explicitly, to remind future readers that it exists and make the code less fragile.
2022-11-11backend/drm: request page-flip event on modesetSimon Ser
The old drm_connector_set_mode() function did that by calling drm_crtc_page_flip(). We lost this in the refactoring. Fixes: f216e979836a ("backend/drm: drop drm_connector_set_mode()")
2022-11-09backend/drm: use pnp.ids to fetch EDID datailliliti
2022-11-08Revert "backend/drm: fetch EDID manufacturer from udev_hwdb"Simon Ser
This reverts commit e646d882cf4949d290fff2ba3b7ae4c124f6f13d. This commit has added a dependency on udev_hwdb. This API isn't available on all platforms (e.g. FreeBSD), and further deepens our udev dependency. A better solution is being worked on in [1]. [1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3638
2022-11-02backend/drm: get possible CRTCs in create_drm_connector()Simon Ser
This stuff is immutable for a given connector.
2022-11-02backend/drm: extract create_drm_connector()Simon Ser
Move a bit more logic out of the big loop in scan_drm_connectors().
2022-10-19backend/drm: fetch current CRTC once on startupSimon Ser
Once we are DRM master, the CRTC cannot be changed behind our back except during a VT switch. After a VT switch, we try to restore whatever KMS state we had last programmed. Reloading the current CRTC from KMS breaks this and can result in a modeset without a FB. Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3432
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-16 15:01:47 +0000