aboutsummaryrefslogtreecommitdiff
path: root/backend/drm
AgeCommit message (Collapse)Author
2021-11-17Remove support for DMA-BUF flagsSimon Ser
They are never used in practice, which makes all of our flag handling effectively dead code. Also, APIs such as KMS don't provide a good way to deal with the flags. Let's just fail the DMA-BUF import when clients provide flags.
2021-11-02backend/drm: handle per-connector hotplug eventsSimon Ser
When a connector ID is specified in a hotplug event, don't scan all connectors. Only scan the connector that has changed.
2021-10-29backend/drm: avoid creating empty FB_DAMAGE_CLIPS propSimon Ser
drmModeCreatePropertyBlob cannot create zero-sized blobs, that fails with EINVAL. Closes: https://github.com/swaywm/wlroots/issues/3297
2021-10-29backend/drm: get rid of BO handle tableSimon Ser
The BO handle table exists to avoid double-closing a BO handle, which aren't reference-counted by the kernel. But if we can guarantee that there is only ever a single ref for each BO handle, then we don't need the BO handle table anymore. This is possible if we create the handle right before the ADDFB2 IOCTL, and close the handle right after. The handles are very short-lived and we don't need to track their lifetime. Because of multi-planar FBs, we need to be a bit careful: some FB planes might share the same handle. But with a small check, it's easy to avoid double-closing the same handle (which wouldn't be a big deal anyways). There's one gotcha though: drmModeSetCursor2 takes a BO handle as input. Saving the handles until drmModeSetCursor2 time would require us to track BO handle lifetimes, so we wouldn't be able to get rid of the BO handle table. As a workaround, use drmModeGetFB to turn the FB ID back to a BO handle, call drmModeSetCursor2 and then immediately close the BO handle. The overhead should be minimal since these IOCTLs are pretty cheap. Closes: https://github.com/swaywm/wlroots/issues/3164
2021-10-27backend/drm/legacy.c: Fix memory leak in drm_legacy_crtc_set_gammaHaelwenn (lanodan) Monnier
Found via scan-build
2021-10-26backend/drm: add entry for Valve EDID vendorSimon Ser
As found in e.g. the Steam Deck.
2021-10-15output: add presented flag to presentation eventKirill Primak
2021-10-02Fix spelling errorsElyes HAOUAS
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
2021-10-01Revert "Require INVALID for implicit format modifiers"Simon Ser
This reverts commit ea7357b70366588069c83f158e6a4eb2d3a702b3.
2021-10-01Revert "backend/drm: fail on explicit modifier in drmModeAddFB2"Simon Ser
This reverts commit d6be1d68b7d0542efa4dc2d19d57531484fe330a.
2021-10-01backend/drm: fail on explicit modifier in drmModeAddFB2Simon Ser
drmModeAddFB2 doesn't support explicit modifiers. Only accept INVALID which indicates an implicit modifier and LINEAR which may indicate that GBM_BO_USE_LINEAR has been used.
2021-10-01Require INVALID for implicit format modifiersSimon Ser
See [1] for the motivation. [1]: https://gitlab.freedesktop.org/wayland/wayland-protocols/-/merge_requests/75
2021-09-30backend: create renderer and allocator in wlr_backend_autocreateSimon Ser
Instead of ensuring the renderer and allocator are initialized in each backend, do it in wlr_backend_autocreate. This allows compositors to create backends without any renderer/allocator if they side-step wlr_backend_autocreate. Since the wlr_backend_get_renderer and backend_get_allocator end up calling wlr_renderer_autocreate and wlr_allocator_autocreate, it sounds like a good idea to centralize all of the opimionated bits in one place.
2021-09-21backend/drm: add support for panel orientationSimon Ser
Expose the panel orientation with wlr_drm_connector_get_panel_orientation. Leave it to the compositor to consume this information and configure the output accordingly. Closes: https://github.com/swaywm/wlroots/issues/1581
2021-09-08backend/drm: introduce wlr_drm_backend_get_non_master_fdSimon Zeni
2021-09-08backend/drm: implement drm lease functionSimon Zeni
2021-09-07backend/drm: drop wlr_drm_connector.desired_modeSimon Ser
Previously used by attempt_enable_needs_modeset, but this has been dropped in the previous commit.
2021-09-07backend/drm: drop attempt_enable_needs_modesetSimon Ser
Modesets require a buffer. The DRM backend tried to auto-enable outputs when a CRTC becomes available in the past, but now that fails because no buffer is available. Instead of having this magic inside the DRM backend, a better approach is to do it in the compositor or in an optional helper.
2021-09-07backend/drm: drop drm_connector_init_rendererSimon Ser
drm_connector_set_pending_fb already takes care of this.
2021-09-07backend/drm: drop unused arg from get_possible_crtcsSimon Ser
Constify drmModeConnector while at it.
2021-09-07backend/drm: fix crash on VT switchSimon Ser
Don't set the MODE flag when disabling a CRTC. This fixes a NULL pointer dereference in drm_connector_state_init.
2021-09-07backend/drm: introduce wlr_drm_connector_stateSimon Ser
Previously, we were copying wlr_output_state on the stack and patching it up to be guaranteed to have a proper drmModeModeInfo stored in it (and not a custom mode). Also, we had a bunch of helpers deriving DRM-specific information from the generic wlr_output_state. Copying the wlr_output_state worked fine so far, but with output layers we'll be getting a wl_list in there. An empty wl_list stores two pointers to itself, copying it on the stack blindly results in infinite loops in wl_list_for_each. To fix this, rework our DRM backend to stop copying wlr_output_state, instead add a new struct wlr_drm_connector_state which holds both the wlr_output_state and additional DRM-specific information.
2021-09-07backend/drm: rename enum wlr_drm_connector_state to statusSimon Ser
"state" is easily confused with wlr_output_state.
2021-09-03backend/drm: handle drm_surface_blit errorsSimon Ser
drm_surface_blit returns NULL on error. This can happen e.g. when the source buffer cannot be imported into EGL. Closes: https://github.com/swaywm/wlroots/issues/3154
2021-08-25backend/drm: introduce wlr_drm_bo_handle_tableSimon Ser
Using GBM to import DRM dumb buffers tends to not work well. By using GBM we're calling some driver-specific functions in Mesa. These functions check whether Mesa can work with the buffer. Sometimes Mesa has requirements which differ from DRM dumb buffers and the GBM import will fail (e.g. on amdgpu). Instead, drop GBM and use drmPrimeFDToHandle directly. But there's a twist: BO handles are not ref'counted by the kernel and need to be ref'counted in user-space [1]. libdrm usually performs this bookkeeping and is used under-the-hood by Mesa. We can't re-use libdrm for this task without using driver-specific APIs. So let's just re-implement the ref'counting logic in wlroots. The wlroots implementation is inspired from amdgpu's in libdrm [2]. Closes: https://github.com/swaywm/wlroots/issues/2916 [1]: https://gitlab.freedesktop.org/mesa/drm/-/merge_requests/110 [2]: https://gitlab.freedesktop.org/mesa/drm/-/blob/1a4c0ec9aea13211997f982715fe5ffcf19dd067/amdgpu/handle_table.c
2021-08-25Move allocator stuff into new directorySimon Ser
Add render/allocator/ and include/render/allocator/ to hold everything allocator-related.
2021-08-25backend/drm: generate CVT reduced modesSimon Ser
The Coordinated Video Timings (CVT) spec [1] defines two types of timings: the "CVT standard CRT" timings and the "CVT reduced blanking" timings (see section 3.6). The standard CRT timings include pauses in the video stream to allow CRT displays to reposition their electron beam at the end of each horizontal scan line [2]. While this was desirable a few decades ago, nowadays we can just generate a CVT reduced blanking timing by default. wlroots users can still set full custom DRM modes via wlr_drm_connector_add_mode. [1]: https://glenwing.github.io/docs/VESA-CVT-1.2.pdf [2]: https://en.wikipedia.org/wiki/Coordinated_Video_Timings#Reduced_blanking
2021-08-20backend/drm: try to allocate crtc for formatsRouven Czerwinski
To retrieve the formats, an allocated crtc is required. If there is no currently no crtc available, try to allocate it. This reproducable by having a disabled output and going through a suspend cycle with amdgpu. On start CRTCs look like this: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=0 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation: 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=0 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=1 desired_enabled=1 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:00:00.588 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 where DP-1 is than disabled. After suspend/resume, allocation turns into: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1099] Reallocating CRTCs 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1110] State before reallocation: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-1' crtc=-1 state=1 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DP-2' crtc=1 state=3 desired_enabled=1 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1116] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1167] State after reallocation: 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-1' crtc=-1 state=1 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DP-2' crtc=1 state=3 desired_enabled=1 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-1' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'HDMI-A-2' crtc=-1 state=0 desired_enabled=0 00:30:22.680 [DEBUG] [wlr] [backend/drm/drm.c:1174] 'DVI-D-1' crtc=-1 state=0 desired_enabled=0 where the crtc for DP-1 is now NULL. Trying to enable the output results in: 10:43:36.906 [DEBUG] [sway/config/output.c:351] Turning on output DP-1 10:43:36.906 [DEBUG] [sway/config/output.c:360] Set preferred mode 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [sway/config/output.c:366] Preferred mode rejected, falling back to another mode 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.906 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.906 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.906 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000 10:43:36.907 [DEBUG] [sway/config/output.c:430] Committing output DP-1 10:43:36.907 [DEBUG] [wlr] [backend/drm/drm.c:464] connector DP-1: Can't enable an output without a buffer 10:43:36.907 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 10:43:36.907 [ERROR] [wlr] [types/wlr_output.c:512] Failed to get primary display formats 10:43:36.907 [ERROR] [sway/config/output.c:435] Failed to commit output DP-1 where the primary format can't be queried since there is no crtc allocated for the connector. Allocating the connector inside drm_connector_get_primary_formats() fixes this issue. This is possible since the only user of get_primary_formats() is the swapchain allocation function, which is only called on output enable. Do the same thing for the cursor formats in case the user queries them before the output is enabled.
2021-08-18backend/drm: add support for FB_DAMAGE_CLIPSSimon Ser
This allows the kernel to access our buffer damage. Some drivers can take advantage of this, e.g. for PSR2 panels (Panel Self Refresh) or for transfer over USB. Closes: https://github.com/swaywm/wlroots/issues/1267
2021-08-17Revert "backend/drm: Check if output is enabled before sending frame event"Rouven Czerwinski
This reverts commit 85757665e6e1393773b36282aa244feb10b7a5fe. We now check if the output is enabled within wlr_output_send_frame, no need to handle this explicitly in the DRM backend. This also fixes a race which was introduced with this commit: if we schedule the flip, disable and commit the output before the flip happens, output.frame_pending will not be reset to false. We than always fail to enable the output subsequently: 00:07:13.276 [INFO] [sway/commands.c:257] Handling command 'output DP-2 enable' 00:07:13.276 [DEBUG] [sway/commands.c:428] Subcommand: enable 00:07:13.276 [DEBUG] [sway/config/output.c:204] Merging on top of existing output config 00:07:13.276 [DEBUG] [sway/config/output.c:227] Config stored for output DP-2 (enabled: 1) (-1x-1@-1.000000Hz position 0,0 scale -1.000000 subpixel unknown transform -1) (bg /home/phoenix/Pictures/Wallpapers/mine/oper.jpg fill) (dpms 1) (max render time: -1) 00:07:13.276 [DEBUG] [sway/config/output.c:351] Turning on output DP-2 00:07:13.276 [DEBUG] [sway/config/output.c:360] Set preferred mode 00:07:13.276 [DEBUG] [wlr] [backend/drm/drm.c:465] connector DP-2: Can't enable an output without a buffer 00:07:13.276 [DEBUG] [wlr] [types/wlr_output.c:689] Attaching empty buffer to output for modeset 00:07:13.277 [DEBUG] [sway/config/output.c:329] Output DPI: 162.560000x161.364706 00:07:13.277 [DEBUG] [sway/config/output.c:400] Auto-detected output scale: 1.000000 00:07:13.277 [DEBUG] [sway/config/output.c:430] Committing output DP-2 00:07:13.277 [DEBUG] [wlr] [types/wlr_output.c:729] Tried to commit a buffer while a frame is pending since the basic_output_test will always fail. Reset frame_pending to false even if the output has been disabled in the meantime. Fixes https://github.com/swaywm/wlroots/issues/3109
2021-08-17backend/drm: return true on test if no crtcRouven Czerwinski
This should fix the following backtrace, seen on my desktop with one output disabled: #0 atomic_crtc_commit (conn=0x270f5c0, state=0x270f6d0, flags=0, test_only=<optimized out>) at ../backend/drm/atomic.c:178 drm = 0x1ae9c10 output = 0x270f5c0 crtc = 0x0 modeset = false active = false mode_id = 43989232 gamma_lut = 0 prev_vrr_enabled = <optimized out> vrr_enabled = <optimized out> atom = {req = 0x270f5c0, failed = 48} ok = <optimized out> #1 0x00007f1104f33128 in drm_crtc_commit (conn=conn@entry=0x270f5c0, state=state@entry=0x270f6d0, flags=flags@entry=0, test_only=test_only@entry=true) at ../backend/drm/drm.c:339 __PRETTY_FUNCTION__ = "drm_crtc_commit" drm = <optimized out> crtc = 0x0 ok = <optimized out> #2 0x00007f1104f34e6c in drm_connector_test (output=output@entry=0x270f5c0) at ../backend/drm/drm.c:488 conn = 0x270f5c0 unsupported = <optimized out> #3 0x00007f1104f35424 in drm_connector_commit (output=0x270f5c0) at ../backend/drm/drm.c:578 conn = 0x270f5c0 #4 0x00007f1104f600b7 in wlr_output_commit (output=output@entry=0x270f5c0) at ../types/wlr_output.c:837 now = {tv_sec = 7732, tv_nsec = 623813006} pre_event = {output = 0x270f5c0, when = 0x7ffecc1be570} back_buffer = 0x0 scale_updated = <optimized out> geometry_updated = <optimized out> committed = <optimized out> event = {output = 0x0, committed = 4401048, when = 0x29f38f0} #5 0x0000000000433047 in apply_output_config (oc=oc@entry=0x29f38f0, output=output@entry=0x2710720) at ../sway/config/output.c:431 wlr_output = 0x270f5c0 output_box = <optimized out> #6 0x0000000000433aaf in apply_output_config_to_outputs (oc=0x2308400) at ../sway/config/output.c:649 current = 0x29f38f0 name = <optimized out> wildcard = true id = "Dell Inc. DELL U2410 F525M9AK0MML\000\060\060\060ACD7\000\000\000\000\000\000\000\220\063\240\002\000\000\000\000L5C\000\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\377\377\377\377\000\000\000\000\355\240E\000\000\000\000\000\377\377\377\377\000\000\000\000@\206+\002\000\000\000\000`\260.\002\000\000\000" sway_output = 0x2710720 tmp = 0x2242030 seat = <optimized out> #7 0x000000000043df6b in cmd_output (argc=<optimized out>, argv=0x2a03390) at ../sway/commands/output.c:108 error = <optimized out> output = <optimized out> background = false #8 0x0000000000410304 in execute_command (_exec=_exec@entry=0x2975d20 "output * dpms off", seat=0x22a3280, seat@entry=0x0, con=con@entry=0x0) at ../sway/commands.c:291 res = <optimized out> argc = 4 argv = 0x2a03370 handler = 0x479230 <handlers+560> cmd = <optimized out> matched_delim = 0 '\000' containers = 0x0 using_criteria = false __PRETTY_FUNCTION__ = "execute_command" exec = 0x28f63c0 "output * dpms off" head = 0x0 res_list = 0x2a2e9d0 #9 0x0000000000418b65 in ipc_client_handle_command (client=client@entry=0x2a6ac80, payload_length=<optimized out>, payload_type=IPC_COMMAND) at ../sway/ipc-server.c:645 line = <optimized out> res_list = <optimized out> json = <optimized out> length = <optimized out> __PRETTY_FUNCTION__ = "ipc_client_handle_command" buf = 0x2975d20 "output * dpms off" #10 0x000000000041964c in ipc_client_handle_readable (client_fd=<optimized out>, mask=<optimized out>, data=0x2a6ac80) at ../sway/ipc-server.c:267 pending_length = <optimized out> pending_type = <optimized out> client = 0x2a6ac80 read_available = 31 buf = "i3-ipc\021\000\000\000\000\000\000" received = 14 #11 0x00007f1104fc3492 in wl_event_loop_dispatch () from /nix/store/ridk7k2ka6dbk4ly7qqjgmc523s4fj89-wayland-1.19.0/lib/libwayland-server.so.0 No symbol table info available. #12 0x00007f1104fc1135 in wl_display_run () from /nix/store/ridk7k2ka6dbk4ly7qqjgmc523s4fj89-wayland-1.19.0/lib/libwayland-server.so.0 No symbol table info available. #13 0x000000000041ac10 in server_run (server=server@entry=0x47b0c0 <server>) at ../sway/server.c:261 No locals. #14 0x000000000041a3fc in main (argc=<optimized out>, argv=0x7ffecc1bec68) at ../sway/main.c:395 verbose = 0 debug = 0 validate = 0 allow_unsupported_gpu = 0 long_options = {{name = 0x45b516 "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x45ee69 "config", has_arg = 1, flag = 0x0, val = 99}, {name = 0x45b51b "validate", has_arg = 0, flag = 0x0, val = 67}, { name = 0x45b524 "debug", has_arg = 0, flag = 0x0, val = 100}, {name = 0x45b3ac "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x45a55c "verbose", has_arg = 0, flag = 0x0, val = 86}, {name = 0x45b52a "get-socketpath", has_arg = 0, flag = 0x0, val = 112}, {name = 0x45b539 "unsupported-gpu", has_arg = 0, flag = 0x0, val = 117}, {name = 0x45b549 "my-next-gpu-wont-be-nvidia", has_arg = 0, flag = 0x0, val = 117}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} config_path = 0x0 usage = 0x45b830 "Usage: sway [options] [command]\n\n -h, --help", ' ' <repeats 13 times>, "Show help message and quit.\n -c, --config <config> Specify a config file.\n -C, --validate Check the validity of the config file, th"... c = <optimized out> where the second output is not enabled: (gdb) frame 4 #4 0x00007f1104f600b7 in wlr_output_commit (output=output@entry=0x270f5c0) at ../types/wlr_output.c:837 837 in ../types/wlr_output.c (gdb) p output->enabled $3 = false (gdb) The culprit being that since 604674dc54a3b2cb4b73de267c8c2bcae259c4b6 we always try to perform a commit, even on a disabled output.
2021-08-17backend/drm: use addon for wlr_drm_fbSimon Ser
2021-08-10backend/drm: always perform a test commit in drm_connector_testSimon Ser
This allows callers to use wlr_output_test to check whether a mode can be enabled, for instance. Closes: https://github.com/swaywm/wlroots/issues/2250
2021-08-10backend/drm: add proper error handling to wlr_drm_backend_createSimon Ser
Some listeners weren't removed and caused a use-after-free with e.g. vkms when used as a secondary GPU.
2021-08-04backend/drm: require buffer on modeset in drm_connector_testSimon Ser
When testing a modeset, make sure the caller has also provided a buffer. This allows df0e75ba05e2 ("output: try skipping buffer allocation if the backend allows it") to work as expected with the DRM backend. Closes: https://github.com/swaywm/wlroots/issues/3086
2021-08-02backend/drm: preserve mode order from kernelSimon Ser
The kernel orders the mode list from highest to lowest. Preserve this ordering in the wlr_output.modes list.
2021-07-29output: drop wlr_output_state.buffer_typeSimon Ser
This is now unconditionally set to WLR_OUTPUT_STATE_BUFFER_SCANOUT.
2021-07-28backend/drm: fix wrong type for get_cursor_format return valuesSimon Ser
These are bools but should be pointers.
2021-07-28backend/drm: stop initializing renderer for parent backendSimon Ser
Unless we're dealing with a multi-GPU setup and the backend being initialized is secondary, we don't need a renderer nor an allocator. Stop initializing these.
2021-07-28backend/drm: drop get_renderer implementationSimon Ser
We can now just rely on the common code for this.
2021-07-28backend/drm: drop drm_surface_{make,unset}_currentSimon Ser
2021-07-28backend/drm: remove SCANOUT check in drm_connector_testSimon Ser
We only accept SCANOUT, the buffer type should never be set to RENDER.
2021-07-28backend/drm: remove primary swapchainSimon Ser
We can't nuke it completely, we still need it for multi-GPU.
2021-07-28backend/drm: allow legacy scan-out if FB props matchSimon Ser
Historically we haven't allowed direct scan-out for legacy KMS, because legacy misses the functionality to make sure a buffer can be scanned out. However with renderer v6 the backend can't figure out anymore whether the buffer comes from its internal swap-chain, because the backend doesn't have an internal swap-chain. The legacy KMS API guarantees that the driver won't reject a buffer as long as it's been allocated with the same parameters as the previous one. Let's check this in legacy_crtc_test.
2021-07-28backend/drm: implement get_primary_formatsSimon Ser
2021-07-22render/wlr_texture: put wlr_texture_from_buffer into the public APISimon Zeni
2021-07-22backend: make DRM and libinput backends optionalayaka
Co-authored-by: Simon Ser <contact@emersion.fr>
2021-07-21backend/drm: add DRM_MODE_CONNECTOR_USB to conn_get_nameSimon Ser
See 757e26712337 ("drm/uapi: Add USB connector type") in the kernel tree.
2021-07-20backend/drm: stop restoring CRTCs on exitSimon Ser
This is the cause of the spurious "drmHandleEvent failed" messages at exit. restore_drm_outputs calls handle_drm_event in a loop without checking whether the FD is readable, so drmHandleEvent ends up with a short read (0 bytes) and returns an error. The loop's goal is to wait for all queued page-flip events to complete, to allow drmModeSetCrtc calls to succeed without EBUSY. The drmModeSetCrtc calls are supposed to restore whatever KMS state we were started with. But it's not clear from my PoV that restoring the KMS state on exit is desirable. KMS clients are supposed to save and restore the (full) KMS state on VT switch, but not on exit. Leaving our KMS state on exit avoids unnecessary modesets and allows flicker-free transitions between clients. See [1] for more details, and note that with Pekka we've concluded that a new flag to reset some KMS props to their default value on compositor start-up is the best way forward. As a side note, Weston doesn't restore the CRTC by does disable the cursor plane on exit (see drm_output_deinit_planes, I still think disabling the cursor plane shouldn't be necessary on exit). Additionally, restore_drm_outputs only a subset of the KMS state. Gamma and other atomic properties aren't accounted for. If the previous KMS client had some outputs disabled, restore_drm_outputs would restore a garbage mode. [1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
2021-07-19backend/drm: fix NULL data in handle_drm_eventSimon Ser
wl_event_loop_add_fd was called with a NULL data argument, but the function expects the data argument to be set to the wlr_drm_backend. Fixes: 053ebe7c278b ("backend/drm: terminate display on drmHandleEvent failure")
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 23:43:09 +0000