Age | Commit message (Collapse) | Author |
|
|
|
Instead of hand-rolling our own manual wlr_output cleanup function, rely
on wlr_output_destroy to remove an output from the compositor's state.
|
|
The DRM backend is a little special when it comes to wlr_outputs: the
wlr_drm_connectors are long-lived and are created even when no screen is
connected.
A wlr_drm_connector only advertises a wlr_output to the compositor when
a screen is connected. As such, most of wlr_output's state is invalid
when the connector is disconnected.
We want to stop using wlr_output state on disconnected connectors.
Introduce wlr_drm_connector.name which is always valid regardless of the
connector status to avoid reading wlr_output.name when disconnected.
|
|
Simplify and unify connector-specific logging with a new
wlr_drm_conn_log macro. This makes it easier to understand which
connector a failure is about, without having to explicitly integrate the
connector name in each log message.
|
|
Instead of manually allocating and initializing the structs, use the new
wlr_drm_format helpers.
|
|
|
|
Save the DRM device name in a wlr_drm_backend field, so that we can
easily use it for logging purposes.
|
|
The workaround is broken because drm_fb_acquire doesn't leave the EGL
context current anymore. We'll need to re-introduce it.
References: https://github.com/swaywm/wlroots/issues/2525
|
|
This allows the DRM code to have direct access to the wlr_drm_backend
without having to go through an upcast via get_drm_backend_from_backend.
|
|
The GBM allocator takes ownership of the DRM FD.
|
|
The compiler is smarter at figuring out whether a function should be
inlined or not.
|
|
gbm_bo_create_with_modifiers doesn't take GBM flags, so our
wlr_gbm_allocator interface doesn't either. We were still internally
using GBM flags in the DRM backend, leading to awkward back-and-forth
conversions.
The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so
turn that into a bool to make sure other flags can't be passed in.
Move the "force linear" logic out of init_drm_surface, because the
supplied wlr_drm_format should already contain that information.
|
|
Closes: https://github.com/swaywm/wlroots/issues/2533
|
|
Since we're using wlr_swapchain, we don't need to provide an EGL config.
|
|
This caused issues with wlr_drm_format_dup.
|
|
This isn't necessarily the case [1].
This should fix an assertion failure on Raspberry Pi 4 dual screen.
[1]: https://lists.freedesktop.org/archives/dri-devel/2020-August/275142.html
Closes: https://github.com/swaywm/wlroots/issues/1943
Co-authored-by: Simon Ser <contact@emersion.fr>
|
|
We don't do anything with them. Once we do, we can easily add this back.
|
|
drm_fb_import_wlr may need to change the current EGL context. For
instance by calling drm_fb_clear, which calls wlr_buffer_unlock, which
may destroy a buffer if the cursor swapchain size has changed, which
calls gles2's destroy_buffer, which calls glDeleteFramebuffers.
Closes: https://github.com/swaywm/wlroots/issues/2479
|
|
This is just the vendor-agnostic define for the GBM platform. It has the
same value as EGL_PLATFORM_GBM_MESA, so should work with old drivers
that only offer the Mesa-vendored extension too.
|
|
|
|
We return early if we don't have a plane.
|
|
On some platforms it's possible that the display engine supports
modifiers not supported by the render engine.
Query render formats and intersect them with plane formats to accommodate
for this.
|
|
Instead of taking a format code and wlr_drm_format_set, simplify the
function signature and take a single wlr_drm_format.
|
|
This reverts commit 713c1661b742f93a7d2167321837c0d99541ca87.
It turns out we do need to force-probe on startup and on hotplug [1].
This is unfortunate, but that's just how the uAPI works. Fixing this
would require patching the kernel.
[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/289506.html
Closes: https://github.com/swaywm/wlroots/issues/2499
|
|
It's not a CRTC property. Remove it altogether since it's unused.
|
|
"rotation" is a plane property, it's not a CRTC property. It was also
missing from plane_info.
|
|
After discussing with Pekka and Daniel on #dri-devel, we concluded [1]
that user-space shouldn't need to force-probe connectors. Force-probing
can take some time, so using drmModeGetConnectorCurrent can result in
faster start-up.
Users can manually trigger a force-probe if necessary:
echo detect | sudo tee /sys/class/drm/card0-DP-1/status
Or just by running a tool like drm_info.
A similar change has been submitted to Weston [2].
[1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/287728.html
[2]: https://gitlab.freedesktop.org/wayland/weston/-/issues/437
|
|
This is more idiomatic wlroots API. The new name makes it clear that the
signal is emitted when wlr_session.active changes.
|
|
Instead of operating on FDs in {open,close}_device, operate on
wlr_devices. This avoids the device lookup in wlr_session and allows
callers to have access to wlr_device fields.
For now, we use it to remove wlr_session_signal_add and replace it with
a more idiomatic wlr_session.events.change field. In the future, other
events will be added.
|
|
We would always return the GAMMA_LUT_SIZE property if available, and
only fall back to legacy gamma size otherwise. This leads to issues if
both are available in differs in size while we use the legacy backend.
Ensure that we only return the legacy size if we're using the legacy
backend.
Closes: https://github.com/swaywm/wlroots/issues/2429
|
|
This avoids hitting an assertion in drm_fb_lock_surface when
we failed to render a black frame.
|
|
|
|
Since all DRM FBs are backed by a wlr_buffer, there's no need for this
anymore.
|
|
|
|
|
|
This allows callers to grab the current frame right after committing it,
without having to incur a full vblank worth of latency.
|
|
When performing a modeset, the DRM backend will request a page-flip
event. However frame_pending wasn't set to true, so any subsequent
wlr_output_schedule_frame calls would imemdiately trigger a synthetic
frame event, asking the compositor to submit a new frame. Committing the
new frame fails with "a page-flip is already pending" error in the DRM
backend.
|
|
When an output is disabled one last pageflip will happen to disable it.
Currently this pageflip causes a frame event.
Since the output is disabled we don't want to send this frame event.
|
|
get_drm_prop_blob does not set path_len if it returns NULL. Check the
return value before path_len to avoid reading uninitialized memory.
(Granted, this doesn't change the logic at all, but it does make
Valgrind a bit happier.)
|
|
|
|
drm_connector_set_cursor wasn't checking the return value of the
drm_surface_make_current call. On failure, this results in a failed
assertion in wlr_renderer_begin (because no rendering context is
current).
|
|
|
|
This mirrors what the atomic code does in create_mode_blob.
Closes: https://github.com/swaywm/wlroots/issues/2312
|
|
The output backend API is now mostly state-less thanks to the atomic
hooks (commit and test). There is one exception though: attach_render.
This function makes the rendering context current. However sometimes the
compositor might decide not to render after attach_render (e.g. when
there's nothing new to render to the back buffer). Thus
wlr_output_rollback has been introduced to revert the pending state.
Because the output backend API is mostly state-less, the only thing
wlr_output_impl.rollback needs to do is revert the current rendering
context. Rename the function to rollback_render to make this clear. Add
a check in the common wlr_output code to only call rollback_render when
attach_buffer has been previously called.
On the long term, we'll be able to remove attach_render and
rollback_render together.
|
|
|
|
Call drm_crtc_commit directly instead of calling drm_connector_set_mode.
This restores the previous behaviour where conn_enable was called [1].
[1]: https://github.com/swaywm/wlroots/blob/0c7c562482575cacaecadcd7913ef25aeb21711f/backend/drm/drm.c#L1093
Closes: https://github.com/swaywm/wlroots/issues/2253
|
|
This patch fixes this failure:
01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending
01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed
01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane
01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1
References: https://github.com/swaywm/sway/issues/5101
|
|
When the mode, status or buffer hasn't changed, drm_connector_commit was
a no-op. Because of this individual changes to the gamma LUT or adaptive
sync status were ignored (if committed without a buffer).
Instead, perform a commit to apply the changes.
|
|
drm_connector_set_mode already takes care of keeping this up-to-date.
|
|
We need to perform the FB bookkeeping on all commits, not just on
page-flips.
|