aboutsummaryrefslogtreecommitdiff
path: root/backend/drm
AgeCommit message (Collapse)Author
2020-05-10backend/drm: GAMMA_LUT_SIZE isn't atomicSimon Ser
GAMMA_LUT_SIZE isn't an atomic property. It can be used with the legacy interface too. So we can unify both codepaths and remove wlr_drm_interface.crtc_get_gamma_size. It's no guaranteed to exist though, so we still need to keep the fallback.
2020-05-09backend/drm: remove crtc_set_cursor from interfaceSimon Ser
2020-05-09backend/drm: remove conn_enable from interfaceSimon Ser
Use crtc_commit instead.
2020-05-09backend/drm: rename crtc_pageflip to crtc_commitSimon Ser
Also add a flags argument. The commit function will also be used for disabling the CRTC.
2020-05-09backend/drm: apply gamma LUT on page-flipSimon Ser
2020-05-09backend/drm: remove mode argument to crtc_pageflipSimon Ser
Add a new wlr_drm_crtc.pending bitfield which keeps track of pending output changes. More fields will be added in the future (e.g. active, gamma).
2020-05-09backend/drm: remove wlr_drm_interface.crtc_move_cursorSimon Ser
Instead, make the legacy backend call drmModeMoveCursor on page-flip.
2020-05-01backend/drm: make page-flip error scarierSimon Ser
The logs don't currently display the importance of a line. It's easy to read "skipping page-flip" as a debug message instead of an error message. Change the error message to make it more explicit. References: https://github.com/swaywm/wlroots/pull/2147
2020-05-01Fix error when reconnecting external displayWill Daly
Reconnecting an external display fails on initial page-flip. This occurs when the pageflip_pending flag has been set on the connector at the time the monitor is removed. Once the connector's CRTC has been deallocated, page_flip_handler cannot find the connector by its crtc_id, so pageflip_pending will remain set. This causes initialization to fail when the monitor is reconnected with the error messages: Skipping pageflip on output 'X' Failed to initialize renderer on connector 'X': initial page-flip failed To fix this problem, clear the pageflip_pending flag when cleaning up the connector.
2020-04-29backend/drm: strip alpha channel if necessarySimon Ser
Some primary planes don't support ARGB8888, they only support XRGB8888 (for instance on older Intel hardware). The DRM backend would fail to initialize. When that's the case, try to allocate buffers without an alpha channel.
2020-04-28backend/drm: don't allow legacy to use direct scanoutScott Anderson
2020-04-28backend/drm: move atomic cursor code into pageflip codeScott Anderson
It makes sense to construct as much atomic state as possible in the same place, so it doesn't get lost if we "reset" it.
2020-04-28backend/drm: don't have fallback atomic commitsScott Anderson
This is just doing atomic incorrectly.
2020-04-28backend/drm: introduce wlr_drm_fbScott Anderson
This is a type which manages gbm_surfaces and imported dmabufs in the same place, and makes the lifetime management between the two shared. It should lead to easier to understand code, and fewer special cases. This also contains a fair bit of refactoring to start using this new type. Co-authored-by: Simon Ser <contact@emersion.fr>
2020-04-10output: check for buffer size compatibility in common codeSimon Ser
Instead of checking for buffer size compatibility in each backend, centralize the check in wlr_output itself.
2020-04-10output: fix blurred hw cursors with fractional scalingSimon Ser
The scaling factor was being implicitly cast to an int. Closes: https://github.com/swaywm/sway/issues/4927
2020-04-09backend: set EGL_RENDERABLE_TYPE and EGL_SURFACE_TYPESimon Ser
Ensure these are set to the correct value.
2020-04-08Add wlr_output_impl.rollbackSimon Ser
Most of the pending output state is not forwarded to the backend prior to an output commit. For instance, wlr_output_set_mode just stashes the mode without calling any wlr_output_impl function. wlr_output_impl.commit is responsible for applying the pending mode. However, there are exceptions to this rule. The first one is wlr_output_attach_render. It won't go away before renderer v6 is complete, because it needs to set the current EGL surface. The second one is wlr_output_attach_buffer. wlr_output_impl.attach_buffer is removed in [1]. When wlr_output_rollback is called, all pending state is supposed to be cleared. This works for all the state except the two exceptions mentionned above. To fix this, introduce wlr_output_impl.rollback. Right now, the backend resets the current EGL surface. This prevents GL commands from affecting the output after wlr_output_rollback. This patch is required for FBO-based outputs to work properly. The compositor might be using FBOs for its own purposes [2], having leftover FBO state can have bad consequences. [1]: https://github.com/swaywm/wlroots/pull/2097 [2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08backend: reset EGL surface after buffer swapSimon Ser
This prevents GL commands to affect a previously current EGL surface after a buffer swap.
2020-04-08output: check buffer in wlr_output_testSimon Ser
Check that buffer can be scanned out in wlr_output_test instead of wlr_output_attach_buffer. This allows the backend to have access to the whole pending state when performing the check. This brings the wlr_output API more in line with the KMS API. This removes the need for wlr_output_attach_buffer to return a value, and for wlr_output_impl.attach_buffer.
2020-04-08output: introduce wlr_output_testSimon Ser
2020-04-02buffer: add a release eventSimon Ser
Consumers call wlr_buffer_lock. Once all consumers are done with the buffer, only the producer should have a reference to the buffer. In this case, we can release the buffer (and let the producer re-use it).
2020-03-15Fix uint32 overflow in fill_empty_gamma_table on Icelake platformFilip Sandborg
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-06backend/drm: add support for adaptive_sync_enabledSimon Ser
The vrr_capable and VRR_ENABLED properties are used.
2020-03-04output: remove wlr_output_impl.schedule_frameSimon Ser
This function allowed backends to provide a custom function for frame scheduling. Before resuming the rendering loop, the DRM and Wayland backends would wait for vsync. There isn't a clear benefit of doing this. The only upside is that we get more stable timings: the delay between two repaints doesn't change too much and is close to a mutliple of the refresh rate. However this introduces latency, especially when a client misses a frame. For instance a fullscreen game missing vblank will need to wait more than a whole frame before being able to display new content. This worst case scenario happens as follows: - Client is still rendering its frame and cannot submit it in time - Deadline is reached - Compositor decides to stop the rendering loop since nothing changed on screen - Client finally manages to render its frame, submits it - Compositor calls wlr_output_schedule_frame - DRM backend waits for next vblank - The wlr_output frame event is fired, compositor draws new content on screen - On the second next vblank, the new content reaches the screen With this patch, the wlr_output frame event is fired immediately when the client submits its late frame. This change also makes it easier to support variable refresh rate, since VRR is all about being able to present too-late frames earlier. References: https://github.com/swaywm/wlroots/issues/1925
2020-01-24backend/drm: remove overzealous finish_drm_surfaceRouven Czerwinski
The previous PR was overzealous in adding a finish_drm_surface call which was also done by the caller. Remove the call and also move the comment to the correct code location.
2020-01-24backend/drm: add env variable to disable modifiersRouven Czerwinski
In some cases modesets fail if the planes are initialized with modifiers. Since in this case possibly all planes need to reinitialized, which is not possible in the current wlroots design, add an environment variable for affected users.
2020-01-17backend/drm: prevent outputs from being destroyed on commitSimon Ser
This would happen if initializing the renderer fails. Instead, we just mark the output as disabled. References: https://github.com/swaywm/sway/pull/4917
2019-12-30backend/drm: don't modeset with a NULL mode after TTY switchSimon Ser
This fixes a segfault in drm_connector_set_mode (mode = NULL). This happens because we set wlr_output.enabled to true if the connector is attached to the CRTC. When the user disables an output in the wlroots-based compositor, switches to another VT (enabling the output), then switches back, wlroots sets wlr_output.enabled to true but wlr_output.current_mode is NULL. We should consider not reading properties from KMS after a TTY switch, disabling all connectors. However this may result in flickering (outputs being disabled then re-enabled). Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30output: refuse to commit a buffer or modeset a disabled outputSimon Ser
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30backend/drm: modeset before enabling an outputSimon Ser
This saves one modeset in case the previous mode is different.
2019-12-30output: re-introduce atomic mode, enabled, scale and transformSimon Ser
This reverts commit 01f903874b7e27539488fad7f31476d5bcbc6ac9 and re-applies commit ee5f98ad49fed0439f3313ec685307831d1d1d05. Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue) See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR) See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates) See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates) See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-29output: add descriptionSimon Ser
wlr_output.description is a string containing a human-readable string identifying the output. Compositors can customise it via wlr_output_set_description, for instance to make the name more user-friendly. References: https://github.com/swaywm/wlroots/issues/1623
2019-12-23meson: Various improvementsScott Anderson
Bumps minimum version to 0.51.0 - Remove all intermediate static libraries. They serve no purpose and are just add a bunch of boilerplate for managing dependencies and options. It's now managed as a list of files which are compiled into libwlroots directly. - Use install_subdir instead of installing headers individually. I've changed my mind since I did that. Listing them out is annoying as hell, and it's easy to forget to do it. - Add not_found_message for all of our optional dependencies that have a meson option. It gives some hints about what option to pass and what the optional dependency is for. - Move all backend subdirectories into their own meson.build. This keeps some of the backend-specific build logic (especially rdp and session) more neatly separated off. - Don't overlink example clients with code they're not using. This was done by merging the protocol dictionaries and setting some variables containing the code and client header file. Example clients now explicitly mention what extension protocols they want to link to. - Split compositor example logic from client example logic. - Minor formatting changes
2019-12-20backend/drm: print preferred modeRouven Czerwinski
While printing the supported output modes, annotate the preferred mode.
2019-12-20Refactor EGL/GL API loadingSimon Ser
Remove glapi.sh code generation, replace it with hand-written loading code that checks extension strings before calling eglGetProcAddress. The GLES2 renderer still uses global state because of: - {PUSH,POP}_GLES2_DEBUG macros - wlr_gles2_texture_from_* taking a wlr_egl instead of the renderer
2019-12-11backend/drm: add BenQ to manufacturer listSimon Ser
2019-12-05backend/drm: fix segfault in init_drm_surfaceSimon Ser
When surf->gbm was previously set, we destroy it without setting it to NULL. Later on, we only create the GBM surface if surf->gbm is NULL. This result in a use-after-free when we start using surf->gbm. Closes: https://github.com/swaywm/wlroots/issues/1868 Closes: https://github.com/swaywm/wlroots/issues/1874 Closes: https://github.com/swaywm/sway/issues/4785 Closes: https://github.com/swaywm/sway/issues/4717 Closes: https://github.com/swaywm/sway/issues/4730 Fixes: 2bdd1d0896cc ("backend/drm: use modifiers for our GBM buffers")
2019-12-01backend/drm, backend/libinput: listen to session destroySimon Ser
This fixes a heap-use-after-free when the session is destroyed before the backend during wl_display_destroy: ==1085==ERROR: AddressSanitizer: heap-use-after-free on address 0x614000000180 at pc 0x7f88e3590c2d bp 0x7ffdc4e33f90 sp 0x7ffdc4e33f80 READ of size 8 at 0x614000000180 thread T0 #0 0x7f88e3590c2c in find_device ../subprojects/wlroots/backend/session/session.c:192 #1 0x7f88e3590e85 in wlr_session_close_file ../subprojects/wlroots/backend/session/session.c:204 #2 0x7f88e357b80c in libinput_close_restricted ../subprojects/wlroots/backend/libinput/backend.c:24 #3 0x7f88e21af274 (/lib64/libinput.so.10+0x28274) #4 0x7f88e21aff1d (/lib64/libinput.so.10+0x28f1d) #5 0x7f88e219ddac (/lib64/libinput.so.10+0x16dac) #6 0x7f88e21b415d in libinput_unref (/lib64/libinput.so.10+0x2d15d) #7 0x7f88e357c9d6 in backend_destroy ../subprojects/wlroots/backend/libinput/backend.c:130 #8 0x7f88e3545a09 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:50 #9 0x7f88e358981a in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:54 #10 0x7f88e358a059 in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:107 #11 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) #12 0x7f88e314b466 in wl_display_destroy (/lib64/libwayland-server.so.0+0x9466) #13 0x559fefb52385 in main ../main.c:67 #14 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152) #15 0x559fefb4297d in _start (/home/simon/src/glider/build/glider+0x2297d) 0x614000000180 is located 320 bytes inside of 416-byte region [0x614000000040,0x6140000001e0) freed by thread T0 here: #0 0x7f88e3d0a6b0 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:122 #1 0x7f88e35b51fb in logind_session_destroy ../subprojects/wlroots/backend/session/logind.c:270 #2 0x7f88e35905a4 in wlr_session_destroy ../subprojects/wlroots/backend/session/session.c:156 #3 0x7f88e358f440 in handle_display_destroy ../subprojects/wlroots/backend/session/session.c:65 #4 0x7f88e314acde (/lib64/libwayland-server.so.0+0x8cde) previously allocated by thread T0 here: #0 0x7f88e3d0acd8 in __interceptor_calloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cc:153 #1 0x7f88e35b911c in logind_session_create ../subprojects/wlroots/backend/session/logind.c:746 #2 0x7f88e358f6b4 in wlr_session_create ../subprojects/wlroots/backend/session/session.c:91 #3 0x559fefb51ea6 in main ../main.c:20 #4 0x7f88e2639152 in __libc_start_main (/lib64/libc.so.6+0x27152)
2019-11-23Amend typosJason
2019-11-20Add -Wmissing-prototypesSimon Ser
This requires functions without a prototype definition to be static. This allows to detect dead code, export less symbols and put shared functions in headers.
2019-11-17output: add wlr_output_event_present.commit_seqSimon Ser
This is set to the value of wlr_output.commit_seq when the frame has been submitted. This allows tracking presentation with more then 1 full frame of latency. References: https://github.com/swaywm/wlroots/issues/1917
2019-10-27backend/drm: add support for custom modesSimon Ser
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-23backend/drm: retry without modifiers for the primary planeSimon Ser
On some Intel cards using modifiers can fill the FIFO and prevent hotplugged outputs from being properly enabled. Add a fallback without modifiers. Fixes: 2bdd1d0896cc ("backend/drm: use modifiers for our GBM buffers") References: https://github.com/swaywm/wlroots/issues/1840 Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-22backend/drm: track gbm_bo during direct scan-outSimon Ser
We need to destroy the gbm_bo we imported and drmModeRmFb. Closes: https://github.com/swaywm/sway/issues/4662
2019-10-11backend/drm: use modifiers for our GBM buffersSimon Ser
2019-09-26drm: use IMPORT_FD for INVALID modifierIvan Molodetskikh
GBM_BO_IMPORT_FD_MODIFIER doesn't accept the INVALID modifier.
2019-09-05backend/drm: check for mst: in path propertyRouven Czerwinski
Instead of checking that the path property is not 0 to determine if the connector is an MST connector, check if the path contains the mst: string. Fixes #1813
2019-08-15backend/drm: fix missing plane formatsSimon Ser
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-12backend/drm: use UINT64_C for uint64_t literalsAntonin Décimo
Prevents an integer promotion bug during the byte-shift.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-10 22:16:46 +0000