| Age | Commit message (Collapse) | Author |
|---|
|
This list contains wlr_drm_connector entries, and there is no
guarantee that the wlr_output fields are initialized.
|
|
Ensure we unlock any pending cursor FB when disabling a connector.
|
|
If the commit fails, then our local state becomes out-of-sync with
the kernel's. Additionally, when disabling a connector without going
through dealloc_crtc(), conn->crtc would still be set.
Fix this by updating conn->crtc in drm_connector_commit_state().
|
|
The raw enum value wasn't informative enough. It's not trivial to
tell whether 0 means connected or disconnected.
Drop the status from the state after realloc, since the exact same
information is printed right above.
|
|
Instead of having a pending_fb field on the struct wlr_drm_plane,
move it to struct wlr_drm_connector_state. That way, there's no
risk having a stale pending FB around: the state doesn't survive
across tests and commits.
The cursor is a special case because it's disconnected from the
atomic state: the wlr_backend_impl.set_cursor hook sets the cursor
for the next commit. Move the field to
wlr_drm_connector.cursor_pending_fb.
|
|
We'll move the pending primary FB into the connector state in the
next commit, dropping wlr_drm_plane.pending_fb in the process.
Introduce a dedicated field for the cursor, which has to be managed
in a special way due to our set_cursor API.
|
|
No need to manually call drm_connector_state_init() here, we can
just let drm_connector_commit_state() handle it.
|
|
We were calling drm_connector_supports_vrr() before
drm_connector_alloc_crtc(). Thus, when an output is currently off,
the VRR test would always fail, because it checks that the
vrr_enabled CRTC prop exists.
|
|
There's no reason why the output should be damaged here. The current
buffer doesn't need to be re-painted.
|
|
Backends no longer need to manually call wlr_output_update_enabled()
in their commit hook: wlr_output will take care of that.
|
|
It doesn't make sense to request a page-flip for a disabled output.
Fixes: 84e727daae67 ("backend/drm: request page-flip event on modeset")
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3528
|
|
Fixes: 65836ce357e4 ("backend/drm: log modesetting commits")
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3534
|
|
|
|
|
|
The old drm_connector_set_mode() function did that by calling
drm_crtc_page_flip(). We lost this in the refactoring.
Fixes: f216e979836a ("backend/drm: drop drm_connector_set_mode()")
|
|
This stuff is immutable for a given connector.
|
|
Move a bit more logic out of the big loop in scan_drm_connectors().
|
|
Once we are DRM master, the CRTC cannot be changed behind our back
except during a VT switch.
After a VT switch, we try to restore whatever KMS state we had last
programmed. Reloading the current CRTC from KMS breaks this and
can result in a modeset without a FB.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3432
|
|
Inline it in drm_connector_commit_state(). Brings us a step closer
to unifying the test code-path and the commit code-path.
|
|
The drm_connector_commit_state() call in handle_session_active()
was not resulting in any atomic commit, because it didn't match any
of the if branches: active = true, no new buffer was committed,
and adaptive sync/gamma LUT were unchanged. Thus the commit was a
no-op.
Later on, when the compositor performs regular page-flips, the
kernel would return EINVAL indicating that a modeset was needed.
Rework the logic to use a non-blocking page-flip commit if a buffer
was committed, and use a blocking commit if the connector is on or
is being disabled. The only case where we should skip the atomic
commit is when disabling (active = false) an already-disabled
connector (conn->crtc == NULL).
Note, 6936e163b514 ("backend/drm: short-circuit no-op commits")
has introduced early returns for other situations where we don't
need to perform an atomic commit (e.g. updating scale or transform
of an output).
Fixes: f216e979836a ("backend/drm: drop drm_connector_set_mode()")
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3432
|
|
Extract the logic to fetch the current mode to a separate function
to make it more readable. Stop dying in an assert when
get_drm_prop_blob() fails. Always make it so the drmModeModeInfo
pointer is allocated so that we can free() it unconditionally.
|
|
We already have disconnect_drm_connector() to handle the
CONNECTED → DISCONNECTED transition. Let's add
connect_drm_connector() to handle DISCONNECTED → CONNECTED. This
makes scan_drm_connectors() shorter and easier to follow.
No functional change, literally just moving code around.
|
|
We were using the legacy API (with a detour through drmModeEncoder)
to find out the current CRTC for a connector. Use the atomic API
when available.
Also extract the whole logic into a separate function for better
readability, and better handle errors.
|
|
Instead of casting a wlr_output_mode to wlr_drm_mode, use
wl_container_of() for slightly better type safety.
|
|
Instead of special-casing modesets, we can just cut the wrapper
and directly call drm_crtc_page_flip(). drm_connector_test() should
already have the checks previously done in drm_connector_set_mode(),
all we need to do is update enabled/mode after a successful atomic
commit.
|
|
This was leading to crash in compositors if the wanted connector had no CRTC
|
|
This field becomes stale too easily: for instance, see 6adca4089cf4
("backend/drm: don't unconditionally set desired_enabled").
Additionally, drm_connector_alloc_crtc() needs to do some weird
dance, restoring its previous value.
Instead, add a connector arg to realloc_crtcs() to indicate a new
connector we want to enable.
|
|
drm_connector_alloc_crtc() already checks this.
|
|
This has been addressed in 8795dde94eeb ("Initialize connectors
current mode to the mode used by KMS on startup.").
|
|
We were unconditonally setting desired_enabled = true for all
connected connectors. This makes realloc_crtcs() always keep a CRTC
active for these, even if the user doesn't want to enable them.
|
|
Without allow_artifacts, applying the new state will fail because
it requires ALLOW_MODESET.
Fixes VT switch and disabling CRTCs.
|
|
When starting up, the compositor might call wlr_output_set_mode()
with a mode which is already the current one. wlroots will detect
this and make the wlr_output_set_mode() call a no-op. During the
next wlr_output_commit() call, wlroots will perform an atomic
commit without the ALLOW_MODESET flag.
This is an issue, because some drivers need ALLOW_MODESET even if
the mode is the same. For instance, if the FB stride or modifier
changed, some drivers require a modeset.
Add a new flag "allow_artifacts" which is set when the compositor
calls mode-setting functions. Use this flag to figure out whether
we want to perform atomic commits with ALLOW_MODESET.
(The name "allow_artifacts" is picked because ALLOW_MODESET is a
misnomer, see [1].)
[1]: https://patchwork.freedesktop.org/patch/505107/
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3499
|
|
|
|
Introduce a function to convert a drmModeModeInfo into a new
wlr_drm_mode.
|
|
|
|
Previously, adaptive sync was just a hint and wouldn't make any
atomic commit fail if the backend didn't support it. The main reason
is wlr_output_test wasn't supported at the time.
Now that we have a way for compositors to test whether a change can
work, let's remove the exception for adaptive sync and convert it to
a regular output state field.
|
|
|
|
|
|
We can just use libdrm's drmModeConnection enum instead.
|
|
- Add wlr_output.enabled checks to CONNECTED checks
- Replace NEEDS_MODESET with CONNECTED
|
|
This function has been merged in libdrm.
References: https://gitlab.freedesktop.org/mesa/drm/-/commit/3ee004ef529f43366fdd1f4d32b26872cc82c6ca
|
|
No need to manually maintain this table now.
The wlroots names and the libdrm (= kernel) names all match.
References: https://gitlab.freedesktop.org/mesa/drm/-/commit/50f8d517733d24fce6693ffae552f9833e2e6aa9
|
|
"max bpc" is a maximum value, the driver is free to choose a
smaller value depending on the bandwidth available.
Some faulty monitors misbehave with higher bpc values. We'll add
a workaround if users get hit by these in practice.
References: https://gitlab.freedesktop.org/wayland/weston/-/issues/612
|
|
drmIsKMS already checks for this.
|
|
The EDID 1.4 spec says that the serial number is optional:
> If this field is not used, then enter “00h, 00h, 00h, 00h”.
Leave the wlr_output.serial field NULL in that case, and hide it
from the output description.
|
|
Since 6936e163b, we short-circut no-op commits as an optimization.
However, the logic in the check was slightly off.
|
|
Some output commits (changing e.g. the output scale or transform)
don't require any change in the KMS state. Instead of going through
a KMS commit, return early. Blocking KMS commits can be expensive.
|
|
Groundwork for the following commits. The goal is to allow users
to specify their own wlr_output_state instead of wlr_output.pending.
|
|
Maintaining our internal table up-to-date is tedious: one needs to
manually go through the PnP ID registry [1] and check whether we're
missing any entry.
udev_hwdb already has an API to fetch a manufacturer name from its
PnP ID. Use that instead.
[1]: https://uefi.org/pnp_id_list
|
|
Ensures there is no field left to its previous undefined value after
calling an init function.
|
