| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
wlr_client_buffer is a bad indicator for direct scan-out.
Compositors might use the underlying wlr_buffer instead.
|
|
This slightly improves type safety.
The culprits were found with:
git grep -E '\([a-z0-9_ ]+ \*\)\W?[a-z]'
|
|
This is a bit more type-safe.
|
|
This fixes an issue where the panel_orientation parameter was set but wlroots was ignoring it and
returning OUTPUT_TRANSFORM_NORMAL.
Fixes 2e12de96
|
|
Removes duplication across all the backends to finally apply the mode
to the output.
|
|
Nobody remembers why this is done and it isn't that great if people
use a lot of custom modes.
|
|
wlr_output_update_needs_frame() is called unconditionally at the
end of the function already.
|
|
This changes the semantics of wlr_output_state. Instead of having
fields with uninitialized memory when missing from the committed
bitflag, all fields are always initialized (and maybe NULL/empty),
just like we do in wlr_surface_state. This reduces the chances of
footguns when reading a field, and removes the need to check for
the committed bitfield everywhere.
A new wlr_output_state_init() function takes care of initializing
the Pixman region.
|
|
Destroying the liftoff_device invalidates all of the liftoff_planes.
Destroy the liftoff_planes before the liftoff_device to fix this.
|
|
|
|
This allows compositors to get back the raw drmModeModeInfo and
look at DRM-specific fields and flags.
|
|
Now it takes a reference to a destination format
|
|
|
|
Helps figuring out why e.g. get_primary_formats fails.
|
|
|
|
We've had this struct for a while. It'd be useful for compositors
if they want to manage the swap chains themselves instead of being
forced to use wlr_output's. Some compositors might also want to use
a swapchain without an output.
|
|
No need to store this info in struct wlr_drm_layer. We can just
extract the size when we need it.
|
|
|
|
|
|
|
|
|
|
Since 1d581656c756 ("backend/drm: set "max bpc" to the max") we
set the "max bpc" property to the maximum value. The kernel driver
is supposed to clamp this value depending on hardware capabilities.
All kernel drivers lower the value depending on the GPU capabilities.
However, none of the drivers lower the value depending on the DP-MST
link capabilities. Thus, enabling a 4k@60Hz mode can fail on some
DP-MST setups due to the "max bpc" property.
Additionally, it's not a good idea to unconditionally set "max bpc"
to the max. A high bpc consumes more lanes and more clock speed,
which means higher power consumption and the busy lanes cannot be
used for something else (e.g. other data transfers on a USB-C cable).
For now, let's tie the "max bpc" to the pixel format of the buffer.
Introduce a heuristic to make "high bit-depth buffer" a synonym of
"I want the best quality".
This is not perfect: a "max bpc" higher than 8 might be desirable
for pixel formats with a color depth of 8 bits, for instance when
the color management KMS properties are used. But we don't really
support that yet, so let's leave this for later.
Closes: https://github.com/swaywm/sway/issues/7367
|
|
We already do it for get_drm_plane_props().
|
|
We only need it for one thing: gamma size. Moreover, some bits in
the drmModeCrtc will become out-of-date, for instance the current
mode, so let's avoid caching the whole struct and only keep what
we know won't change.
|
|
connect_drm_connector() may be called long after create_drm_connector().
During that time the DRM mode might have changed. Avoid working with
stale information.
|
|
|
|
If the kernel adds new enum entries for subpixel, don't read past
the end of the subpixel_map array.
|
|
match_obj() might return a configuration where the CRTC for an
enabled connector is switched to another one.
We don't support this correctly: the wlr_output common code would
need to query again the supported formats, re-allocate the
swapchain, etc.
What's more, the kernel doesn't even support this [1]: it
requires planes to be disabled to change their CRTC, it rejects
commits directly switching the CRTC used by a plane.
[1]: https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_atomic.c?h=6e90293618ed476d6b11f82ce724efbb9e9a071b#n697
|
|
This list contains wlr_drm_connector entries, and there is no
guarantee that the wlr_output fields are initialized.
|
|
Ensure we unlock any pending cursor FB when disabling a connector.
|
|
If the commit fails, then our local state becomes out-of-sync with
the kernel's. Additionally, when disabling a connector without going
through dealloc_crtc(), conn->crtc would still be set.
Fix this by updating conn->crtc in drm_connector_commit_state().
|
|
The raw enum value wasn't informative enough. It's not trivial to
tell whether 0 means connected or disconnected.
Drop the status from the state after realloc, since the exact same
information is printed right above.
|
|
Instead of having a pending_fb field on the struct wlr_drm_plane,
move it to struct wlr_drm_connector_state. That way, there's no
risk having a stale pending FB around: the state doesn't survive
across tests and commits.
The cursor is a special case because it's disconnected from the
atomic state: the wlr_backend_impl.set_cursor hook sets the cursor
for the next commit. Move the field to
wlr_drm_connector.cursor_pending_fb.
|
|
We'll move the pending primary FB into the connector state in the
next commit, dropping wlr_drm_plane.pending_fb in the process.
Introduce a dedicated field for the cursor, which has to be managed
in a special way due to our set_cursor API.
|
|
No need to manually call drm_connector_state_init() here, we can
just let drm_connector_commit_state() handle it.
|
|
We were calling drm_connector_supports_vrr() before
drm_connector_alloc_crtc(). Thus, when an output is currently off,
the VRR test would always fail, because it checks that the
vrr_enabled CRTC prop exists.
|
|
There's no reason why the output should be damaged here. The current
buffer doesn't need to be re-painted.
|
|
Backends no longer need to manually call wlr_output_update_enabled()
in their commit hook: wlr_output will take care of that.
|
|
It doesn't make sense to request a page-flip for a disabled output.
Fixes: 84e727daae67 ("backend/drm: request page-flip event on modeset")
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3528
|
|
Fixes: 65836ce357e4 ("backend/drm: log modesetting commits")
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3534
|
|
|
|
|
|
The old drm_connector_set_mode() function did that by calling
drm_crtc_page_flip(). We lost this in the refactoring.
Fixes: f216e979836a ("backend/drm: drop drm_connector_set_mode()")
|
|
This stuff is immutable for a given connector.
|
|
Move a bit more logic out of the big loop in scan_drm_connectors().
|
|
Once we are DRM master, the CRTC cannot be changed behind our back
except during a VT switch.
After a VT switch, we try to restore whatever KMS state we had last
programmed. Reloading the current CRTC from KMS breaks this and
can result in a modeset without a FB.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3432
|
|
Inline it in drm_connector_commit_state(). Brings us a step closer
to unifying the test code-path and the commit code-path.
|
