aboutsummaryrefslogtreecommitdiff
path: root/backend/drm/drm.c
AgeCommit message (Collapse)Author
2020-12-24backend/drm: log whether ADDFB2 modifiers are supportedSimon Ser
2020-12-23backend/drm: don't retry page-flip when modifiers are unsupportedSimon Ser
Parse WLR_DRM_NO_MODIFIERS at startup. Don't parse IN_FORMATS when WLR_DRM_NO_MODIFIERS is set, so that the legacy behaviour is better reproduced. When modifiers aren't supported, try the initial page-flip once only.
2020-12-23backend/drm: use plural form for possible_crtcsSimon Ser
Make it clearer that this is a bitmask of CRTC indices.
2020-12-22backend/drm: assert connector state after wlr_output_destroySimon Ser
2020-12-22backend/drm: destroy DRM connectors that disappearSimon Ser
This was lost during the refactoring. We were previously calling wlr_output_destroy, which destroyed the connector as well. Fixes: 248c7787c7b4 ("backend/drm: refactor wlr_output destruction")
2020-12-22backend/drm: remove drm_fb_acquireSimon Ser
Instead, import the buffer into GBM and KMS in drm_fb_import. Also move the multi-GPU copy there if necessary.
2020-12-22backend/drm: grab DMA-BUF from wlr_buffer instead of gbm_boSimon Ser
Get the DMA-BUF directly out of the wlr_buffer instead of relying on the gbm_bo. This eliminates a roundtrip through GBM.
2020-12-18backend/drm: avoid gcc stringop-truncation warningRonan Pigott
2020-12-18backend/drm: remove unused wlr_drm_plane.drm_formatSimon Ser
2020-12-18backend/drm: refactor wlr_output destructionSimon Ser
Instead of hand-rolling our own manual wlr_output cleanup function, rely on wlr_output_destroy to remove an output from the compositor's state.
2020-12-18backend/drm: introduce wlr_drm_connector.nameSimon Ser
The DRM backend is a little special when it comes to wlr_outputs: the wlr_drm_connectors are long-lived and are created even when no screen is connected. A wlr_drm_connector only advertises a wlr_output to the compositor when a screen is connected. As such, most of wlr_output's state is invalid when the connector is disconnected. We want to stop using wlr_output state on disconnected connectors. Introduce wlr_drm_connector.name which is always valid regardless of the connector status to avoid reading wlr_output.name when disconnected.
2020-12-18backend/drm: introduce wlr_drm_conn_logSimon Ser
Simplify and unify connector-specific logging with a new wlr_drm_conn_log macro. This makes it easier to understand which connector a failure is about, without having to explicitly integrate the connector name in each log message.
2020-12-17backend/drm: print DRM device name when scanning connectorsSimon Ser
2020-12-17backend/drm: remove nouveau workaroundSimon Ser
The workaround is broken because drm_fb_acquire doesn't leave the EGL context current anymore. We'll need to re-introduce it. References: https://github.com/swaywm/wlroots/issues/2525
2020-12-15backend/drm: add wlr_drm_connector.backendSimon Ser
This allows the DRM code to have direct access to the wlr_drm_backend without having to go through an upcast via get_drm_backend_from_backend.
2020-12-13backend/drm: stop using GBM flagsSimon Ser
gbm_bo_create_with_modifiers doesn't take GBM flags, so our wlr_gbm_allocator interface doesn't either. We were still internally using GBM flags in the DRM backend, leading to awkward back-and-forth conversions. The only flag passed to drm_plane_init_surface was GBM_BO_USE_LINEAR, so turn that into a bool to make sure other flags can't be passed in. Move the "force linear" logic out of init_drm_surface, because the supplied wlr_drm_format should already contain that information.
2020-12-11backend/drm: remove workaround for amdgpu DP MSTSimon Ser
Closes: https://github.com/swaywm/wlroots/issues/2533
2020-12-09backend/drm: remove EGL configSimon Ser
Since we're using wlr_swapchain, we don't need to provide an EGL config.
2020-12-08backend/drm: don't assume possible_crtcs has only one bit setStephane Chauveau
This isn't necessarily the case [1]. This should fix an assertion failure on Raspberry Pi 4 dual screen. [1]: https://lists.freedesktop.org/archives/dri-devel/2020-August/275142.html Closes: https://github.com/swaywm/wlroots/issues/1943 Co-authored-by: Simon Ser <contact@emersion.fr>
2020-12-08backend/drm: stop tracking overlay planesSimon Ser
We don't do anything with them. Once we do, we can easily add this back.
2020-12-07drm: do not unset make/model before emitting destroy eventIlia Bozhinov
2020-12-04backend/drm: remove unused if in drm_connector_move_cursorSimon Ser
We return early if we don't have a plane.
2020-12-01Revert "backend/drm: stop force-probing connectors"Simon Ser
This reverts commit 713c1661b742f93a7d2167321837c0d99541ca87. It turns out we do need to force-probe on startup and on hotplug [1]. This is unfortunate, but that's just how the uAPI works. Fixing this would require patching the kernel. [1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/289506.html Closes: https://github.com/swaywm/wlroots/issues/2499
2020-11-24backend/drm: stop force-probing connectorsSimon Ser
After discussing with Pekka and Daniel on #dri-devel, we concluded [1] that user-space shouldn't need to force-probe connectors. Force-probing can take some time, so using drmModeGetConnectorCurrent can result in faster start-up. Users can manually trigger a force-probe if necessary: echo detect | sudo tee /sys/class/drm/card0-DP-1/status Or just by running a tool like drm_info. A similar change has been submitted to Weston [2]. [1]: https://lists.freedesktop.org/archives/dri-devel/2020-November/287728.html [2]: https://gitlab.freedesktop.org/wayland/weston/-/issues/437
2020-11-19backend/drm: Use legacy gamma size for legacy backendKenny Levinsen
We would always return the GAMMA_LUT_SIZE property if available, and only fall back to legacy gamma size otherwise. This leads to issues if both are available in differs in size while we use the legacy backend. Ensure that we only return the legacy size if we're using the legacy backend. Closes: https://github.com/swaywm/wlroots/issues/2429
2020-11-15backend/drm: check drm_surface_render_black_frame return valueSimon Ser
This avoids hitting an assertion in drm_fb_lock_surface when we failed to render a black frame.
2020-11-15backend/drm: get rid of wlr_drm_fb_typeSimon Ser
Since all DRM FBs are backed by a wlr_buffer, there's no need for this anymore.
2020-11-15backend/drm: add support for wlr_swapchain buffer ageSimon Ser
2020-11-15backend/drm: use wlr_swapchainSimon Ser
2020-11-05backend/drm: export pending FB in export_dmabuf, if anySimon Ser
This allows callers to grab the current frame right after committing it, without having to incur a full vblank worth of latency.
2020-11-03backend/drm: fix "a page-flip is already pending" errors on modesetSimon Ser
When performing a modeset, the DRM backend will request a page-flip event. However frame_pending wasn't set to true, so any subsequent wlr_output_schedule_frame calls would imemdiately trigger a synthetic frame event, asking the compositor to submit a new frame. Committing the new frame fails with "a page-flip is already pending" error in the DRM backend.
2020-10-30backend/drm: Check if output is enabled before sending frame eventMarten Ringwelski
When an output is disabled one last pageflip will happen to disable it. Currently this pageflip causes a frame event. Since the output is disabled we don't want to send this frame event.
2020-07-31drm: fix uninitialized readDevin J. Pohly
get_drm_prop_blob does not set path_len if it returns NULL. Check the return value before path_len to avoid reading uninitialized memory. (Granted, this doesn't change the logic at all, but it does make Valgrind a bit happier.)
2020-07-27Fix incorrect format parametersAntonin Décimo
2020-07-07backend/drm: check drm_surface_make_current return valueSimon Ser
drm_connector_set_cursor wasn't checking the return value of the drm_surface_make_current call. On failure, this results in a failed assertion in wlr_renderer_begin (because no rendering context is current).
2020-06-19output: rename impl->rollback to rollback_renderSimon Ser
The output backend API is now mostly state-less thanks to the atomic hooks (commit and test). There is one exception though: attach_render. This function makes the rendering context current. However sometimes the compositor might decide not to render after attach_render (e.g. when there's nothing new to render to the back buffer). Thus wlr_output_rollback has been introduced to revert the pending state. Because the output backend API is mostly state-less, the only thing wlr_output_impl.rollback needs to do is revert the current rendering context. Rename the function to rollback_render to make this clear. Add a check in the common wlr_output code to only call rollback_render when attach_buffer has been previously called. On the long term, we'll be able to remove attach_render and rollback_render together.
2020-06-08backend/drm: fix stack overflow in dealloc_crtcSimon Ser
Call drm_crtc_commit directly instead of calling drm_connector_set_mode. This restores the previous behaviour where conn_enable was called [1]. [1]: https://github.com/swaywm/wlroots/blob/0c7c562482575cacaecadcd7913ef25aeb21711f/backend/drm/drm.c#L1093 Closes: https://github.com/swaywm/wlroots/issues/2253
2020-06-03backend/drm: fix black screens when enabling outputSimon Ser
This patch fixes this failure: 01:57:16.642 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending 01:57:16.684 [ERROR] [backend/drm/drm.c:360] Failed to page-flip output 'eDP-1': a page-flip is already pending 01:57:16.684 [ERROR] [backend/drm/drm.c:732] Failed to initialize renderer on connector 'eDP-1': initial page-flip failed 01:57:16.684 [ERROR] [backend/drm/drm.c:805] Failed to initialize renderer for plane 01:57:16.684 [sway/config/output.c:423] Failed to commit output eDP-1 References: https://github.com/swaywm/sway/issues/5101
2020-06-01backend/drm: always perform a CRTC commit in drm_connector_commitSimon Ser
When the mode, status or buffer hasn't changed, drm_connector_commit was a no-op. Because of this individual changes to the gamma LUT or adaptive sync status were ignored (if committed without a buffer). Instead, perform a commit to apply the changes.
2020-06-01backend/drm: drop extra wlr_output_update_enabled callSimon Ser
drm_connector_set_mode already takes care of keeping this up-to-date.
2020-06-01backend/drm: commit/rollback FBs in drm_crtc_commitSimon Ser
We need to perform the FB bookkeeping on all commits, not just on page-flips.
2020-06-01backend/drm: make adaptive_sync atomicSimon Ser
Stop using drmModeObjectSetProperty, set the property in the crtc_commit function instead.
2020-06-01backend/drm: rollback pending CRTC state on test commitSimon Ser
A test commit doesn't apply the pending state. The CRTC state will be populated again if the compositor decides to perform a regular commit afterwards.
2020-05-27backend/drm: fix missing crtc->cursor NULL checkSimon Ser
Fixes: cdb6fdbc6cb7 ("backend/drm: remove missing cursor plane workaround")
2020-05-27backend/drm: don't set cursor if off-screenSimon Ser
Closes: https://github.com/swaywm/wlroots/issues/2216
2020-05-26backend/drm: introduce pending and current CRTC stateSimon Ser
Previously, we only had the pending state (crtc->pending, crtc->mode and crtc->active). This causes issues when a commit fails: the pending state is left as-is, and the next commit may read stale data from it. This will also cause issues when implementing test-only commits: we need to rollback the pending CRTC state after a test-only commit. Introduce separate pending and current CRTC states. Properly update the current state after a commit.
2020-05-26backend/drm: nuke retry_pageflipSimon Ser
retry_pageflip is now dead code, since drm_connector_start_renderer isn't called anymore. It was previously called when enabling an output. The name "retry_pageflip" was a little confusing because the function retried a modeset and the timer wasn't set up while performing a simple page-flip. Let's just remove this altogether for now. We can discuss whether it's worth it to bring it back. Should we only do it on failed page-flips? Should we only do it on EBUSY?
2020-05-26backend/drm: make drm_connector_set_mode take a wlr_drm_connectorSimon Ser
Since this is an internal DRM backend function, there's no reason we need to take a generic wlr_output.
2020-05-26backend/drm: remove enable_drm_connectorSimon Ser
Merge enable_drm_connector into drm_connector_set_mode. This allows us to de-duplicate logic since enabling an output performs a modeset.
2020-05-26backend/drm: remove drm_connector_set_custom_modeSimon Ser
Replace it with a function that returns the pending mode.
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-06 14:33:59 +0000