aboutsummaryrefslogtreecommitdiff
path: root/backend/drm/drm.c
AgeCommit message (Collapse)Author
2020-04-10output: check for buffer size compatibility in common codeSimon Ser
Instead of checking for buffer size compatibility in each backend, centralize the check in wlr_output itself.
2020-04-10output: fix blurred hw cursors with fractional scalingSimon Ser
The scaling factor was being implicitly cast to an int. Closes: https://github.com/swaywm/sway/issues/4927
2020-04-08Add wlr_output_impl.rollbackSimon Ser
Most of the pending output state is not forwarded to the backend prior to an output commit. For instance, wlr_output_set_mode just stashes the mode without calling any wlr_output_impl function. wlr_output_impl.commit is responsible for applying the pending mode. However, there are exceptions to this rule. The first one is wlr_output_attach_render. It won't go away before renderer v6 is complete, because it needs to set the current EGL surface. The second one is wlr_output_attach_buffer. wlr_output_impl.attach_buffer is removed in [1]. When wlr_output_rollback is called, all pending state is supposed to be cleared. This works for all the state except the two exceptions mentionned above. To fix this, introduce wlr_output_impl.rollback. Right now, the backend resets the current EGL surface. This prevents GL commands from affecting the output after wlr_output_rollback. This patch is required for FBO-based outputs to work properly. The compositor might be using FBOs for its own purposes [2], having leftover FBO state can have bad consequences. [1]: https://github.com/swaywm/wlroots/pull/2097 [2]: https://github.com/swaywm/wlroots/pull/2063#issuecomment-597614312
2020-04-08backend: reset EGL surface after buffer swapSimon Ser
This prevents GL commands to affect a previously current EGL surface after a buffer swap.
2020-04-08output: check buffer in wlr_output_testSimon Ser
Check that buffer can be scanned out in wlr_output_test instead of wlr_output_attach_buffer. This allows the backend to have access to the whole pending state when performing the check. This brings the wlr_output API more in line with the KMS API. This removes the need for wlr_output_attach_buffer to return a value, and for wlr_output_impl.attach_buffer.
2020-04-08output: introduce wlr_output_testSimon Ser
2020-04-02buffer: add a release eventSimon Ser
Consumers call wlr_buffer_lock. Once all consumers are done with the buffer, only the producer should have a reference to the buffer. In this case, we can release the buffer (and let the producer re-use it).
2020-03-15Fix uint32 overflow in fill_empty_gamma_table on Icelake platformFilip Sandborg
Closes: https://github.com/swaywm/sway/issues/4826
2020-03-06backend/drm: add support for adaptive_sync_enabledSimon Ser
The vrr_capable and VRR_ENABLED properties are used.
2020-03-04output: remove wlr_output_impl.schedule_frameSimon Ser
This function allowed backends to provide a custom function for frame scheduling. Before resuming the rendering loop, the DRM and Wayland backends would wait for vsync. There isn't a clear benefit of doing this. The only upside is that we get more stable timings: the delay between two repaints doesn't change too much and is close to a mutliple of the refresh rate. However this introduces latency, especially when a client misses a frame. For instance a fullscreen game missing vblank will need to wait more than a whole frame before being able to display new content. This worst case scenario happens as follows: - Client is still rendering its frame and cannot submit it in time - Deadline is reached - Compositor decides to stop the rendering loop since nothing changed on screen - Client finally manages to render its frame, submits it - Compositor calls wlr_output_schedule_frame - DRM backend waits for next vblank - The wlr_output frame event is fired, compositor draws new content on screen - On the second next vblank, the new content reaches the screen With this patch, the wlr_output frame event is fired immediately when the client submits its late frame. This change also makes it easier to support variable refresh rate, since VRR is all about being able to present too-late frames earlier. References: https://github.com/swaywm/wlroots/issues/1925
2020-01-24backend/drm: remove overzealous finish_drm_surfaceRouven Czerwinski
The previous PR was overzealous in adding a finish_drm_surface call which was also done by the caller. Remove the call and also move the comment to the correct code location.
2020-01-24backend/drm: add env variable to disable modifiersRouven Czerwinski
In some cases modesets fail if the planes are initialized with modifiers. Since in this case possibly all planes need to reinitialized, which is not possible in the current wlroots design, add an environment variable for affected users.
2020-01-17backend/drm: prevent outputs from being destroyed on commitSimon Ser
This would happen if initializing the renderer fails. Instead, we just mark the output as disabled. References: https://github.com/swaywm/sway/pull/4917
2019-12-30backend/drm: don't modeset with a NULL mode after TTY switchSimon Ser
This fixes a segfault in drm_connector_set_mode (mode = NULL). This happens because we set wlr_output.enabled to true if the connector is attached to the CRTC. When the user disables an output in the wlroots-based compositor, switches to another VT (enabling the output), then switches back, wlroots sets wlr_output.enabled to true but wlr_output.current_mode is NULL. We should consider not reading properties from KMS after a TTY switch, disabling all connectors. However this may result in flickering (outputs being disabled then re-enabled). Closes: https://github.com/swaywm/wlroots/issues/1874
2019-12-30output: refuse to commit a buffer or modeset a disabled outputSimon Ser
References: https://github.com/swaywm/wlroots/issues/1780#issuecomment-518938390
2019-12-30backend/drm: modeset before enabling an outputSimon Ser
This saves one modeset in case the previous mode is different.
2019-12-30output: re-introduce atomic mode, enabled, scale and transformSimon Ser
This reverts commit 01f903874b7e27539488fad7f31476d5bcbc6ac9 and re-applies commit ee5f98ad49fed0439f3313ec685307831d1d1d05. Updates: https://github.com/swaywm/wlroots/issues/1640 (Atomic output updates issue) See also: https://github.com/swaywm/wlroots/pull/1762 (Atomic output updates original PR) See also: https://github.com/swaywm/wlroots/issues/1780 (Issue caused by atomic output updates) See also: https://github.com/swaywm/sway/issues/4419 (Issue caused by atomic output updates) See also: https://github.com/swaywm/wlroots/pull/1781 (Revert PR)
2019-12-29output: add descriptionSimon Ser
wlr_output.description is a string containing a human-readable string identifying the output. Compositors can customise it via wlr_output_set_description, for instance to make the name more user-friendly. References: https://github.com/swaywm/wlroots/issues/1623
2019-12-20backend/drm: print preferred modeRouven Czerwinski
While printing the supported output modes, annotate the preferred mode.
2019-11-23Amend typosJason
2019-11-17output: add wlr_output_event_present.commit_seqSimon Ser
This is set to the value of wlr_output.commit_seq when the frame has been submitted. This allows tracking presentation with more then 1 full frame of latency. References: https://github.com/swaywm/wlroots/issues/1917
2019-10-27backend/drm: add support for custom modesSimon Ser
Use the CVT algorithm to create a drmModeModeInfo.
2019-10-23backend/drm: retry without modifiers for the primary planeSimon Ser
On some Intel cards using modifiers can fill the FIFO and prevent hotplugged outputs from being properly enabled. Add a fallback without modifiers. Fixes: 2bdd1d0896cc ("backend/drm: use modifiers for our GBM buffers") References: https://github.com/swaywm/wlroots/issues/1840 Closes: https://github.com/swaywm/wlroots/issues/1852
2019-10-22backend/drm: track gbm_bo during direct scan-outSimon Ser
We need to destroy the gbm_bo we imported and drmModeRmFb. Closes: https://github.com/swaywm/sway/issues/4662
2019-10-11backend/drm: use modifiers for our GBM buffersSimon Ser
2019-09-05backend/drm: check for mst: in path propertyRouven Czerwinski
Instead of checking that the path property is not 0 to determine if the connector is an MST connector, check if the path contains the mst: string. Fixes #1813
2019-08-15backend/drm: fix missing plane formatsSimon Ser
The loop populating the format list was exiting early if ARGB8888 was found.
2019-08-12backend/drm: use UINT64_C for uint64_t literalsAntonin Décimo
Prevents an integer promotion bug during the byte-shift.
2019-08-07Revert "output: atomic mode"Rouven Czerwinski
This reverts commit ee5f98ad49fed0439f3313ec685307831d1d1d05. This intoduced problems where outputs could not be turned off because they had flips pending.
2019-08-03backend/drm: destroy output immediatelyRouven Czerwinski
Instead of waiting for the next pageflip, destroy the output immediately since we can now handle flips for outputs which no longer exist. Also demote the missing crtc on flip to debug. Fixes #1739
2019-08-02output: atomic mode, enabled, scale and transformSimon Ser
This commit makes more output properties (mode, enabled, scale and transform) atomic. This means that they are double-buffered and only applied on commit. Compositors now need to call wlr_output_commit after setting any of those properties. Internally, backends still apply properties sequentially. The behaviour should be exactly the same as before. Future commits will update some backends to take advantage of the atomic interface. Some backends are non-atomic by design, e.g. the X11 backend or the legacy DRM backend. Updates: https://github.com/swaywm/wlroots/issues/1640
2019-07-27Remove all wayland-server.h includesSimon Ser
The documentation for wayland-server.h says: > Use of this header file is discouraged. Prefer including > wayland-server-core.h instead, which does not include the server protocol > header and as such only defines the library PI, excluding the deprecated API > below. Replacing wayland-server.h with wayland-server-core.h allows us to drop the WL_HIDE_DEPRECATED declaration.
2019-06-27backend: drm: switch to pageflip_handler_2Rouven Czerwinski
atomic and legacy now both pass the backend as the user data for the pageflip event. We than retrieve the correct connector by matching on the crtc_id passed to the page_flip_handler2. Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now. Fixes #1297
2019-06-24backend/drm: Exit-early if 0 crtcsScott Anderson
This fixes an assertion failure if we're using a device that has 0 crtcs as a renderer. This would happen on some laptops with discrete GPUs.
2019-06-22backend/drm: Simplify object matching codeScott Anderson
We originally used match_obj on planes, but this was largely unnecessary. Instead, this assigns planes statically at startup.
2019-06-16output: remove wlr_output_impl.transformSimon Ser
The backend doesn't need to handle transform changes, since everything is done in software. In fact, all of the implementations were all identical and just set the transform. We could add support for hardware transforms, but: - This would require a different field (something like hardware_transform) - Not all combinations are possible because there often are hardware limitations - The Wayland protocol isn't ready for this (in particular xdg-output, see [1]) This belongs to a different patch series anyway. [1]: https://patchwork.freedesktop.org/series/52324/
2019-06-07backend/drm: fallback to drmModeAddFB2Simon Ser
2019-06-07backend/drm: reject DMA-BUFs with flagsSimon Ser
2019-06-07backend/drm: hold buffers while scanning outSimon Ser
2019-06-07output: fix attach_buffer semanticsSimon Ser
2019-06-07output: change set_dmabuf to attach_bufferSimon Ser
2019-06-07backend/drm: strip alpha channel on scan-outSimon Ser
2019-06-07backend/drm: check format when scanning out DMA-BUFSimon Ser
2019-06-07backend/drm: add basic support for direct scan-outemersion
2019-04-23output: rename needs_commit to needs_frameSimon Ser
This new name makes more sense, since it is a request from the backend to get a new frame. In the future a commit may not convey a new frame.
2019-04-23output: refactor backend APISimon Ser
This updates the backend part of the output API. This is mostly renaming: make_current becomes attach_render and swap_buffers becomes commit. This also fixes the RDP backend to support NULL damage.
2019-04-22Fix missing headers when building without X11Alyssa Ross
The deleted includes are redundant, because other headers will include the necessary files. Additionally, they cause build failures, because including EGL/egl.h or EGL/eglext.h directly, instead of through wlr/render/egl.h or wlr/render/interface.h, will mean that MESA_EGL_NO_X11_HEADERS will not have been defined, and so the EGL headers will attempt to pull in unnecessary X11 headers that may not exist on the system. For the headers produced by glgen.sh, the includes couldn't simply be deleted, because no other header would include the EGL headers. Neither wlr/render/egl.h or wlr/render/interface.h felt appropriate to include, so I opted instead to copy the MESA_EGL_NO_X11_HEADERS definition before the EGL includes.
2019-03-21wlr_output: Add preferred property (#1625)Guido Günther
* wlr_output: Indicate modes link * wlr_output: Introduce preferred flag This indicates an outputs preferred mode. * drm: Set preferred flag for an outputs preferred mode
2019-03-05backend/drm: Don't fail on failing to find overlay formatScott Anderson
Some hardware exists which doesn't support XRGB/ARGB overlays, and we aren't even using overlay planes, so don't fail on trying to find a format.
2019-02-24backend/drm: Unset cursor on cleanupScott Anderson
This will prevent the cursor from persisting on the Linux framebuffer terminal on exit.