aboutsummaryrefslogtreecommitdiff
path: root/backend/drm/atomic.c
AgeCommit message (Collapse)Author
2020-04-28backend/drm: move atomic cursor code into pageflip codeScott Anderson
It makes sense to construct as much atomic state as possible in the same place, so it doesn't get lost if we "reset" it.
2020-04-28backend/drm: don't have fallback atomic commitsScott Anderson
This is just doing atomic incorrectly.
2020-04-28backend/drm: introduce wlr_drm_fbScott Anderson
This is a type which manages gbm_surfaces and imported dmabufs in the same place, and makes the lifetime management between the two shared. It should lead to easier to understand code, and fewer special cases. This also contains a fair bit of refactoring to start using this new type. Co-authored-by: Simon Ser <contact@emersion.fr>
2019-11-20Add -Wmissing-prototypesSimon Ser
This requires functions without a prototype definition to be static. This allows to detect dead code, export less symbols and put shared functions in headers.
2019-06-27backend: drm: switch to pageflip_handler_2Rouven Czerwinski
atomic and legacy now both pass the backend as the user data for the pageflip event. We than retrieve the correct connector by matching on the crtc_id passed to the page_flip_handler2. Wlroots also requires the DRM_CRTC_IN_VBLANK_EVENT capability now. Fixes #1297
2019-06-11Remove WLR_DRM_NO_ATOMIC_GAMMA workaroundScott Anderson
This is fixed on amdgpu, so we don't need this anymore.
2019-06-07backend/drm: fallback to drmModeAddFB2Simon Ser
2019-01-29backend/drm: fix GBM format mismatchemersion
We create the EGL config with GBM_FORMAT_ARGB8888, but then initialize GBM BOs with GBM_FORMAT_XRGB8888. This mismatch confuses Mesa. Instead, we can always use GBM_FORMAT_ARGB8888, and use DRM_FORMAT_XRGB8888 when calling drmModeAddFB2. Fixes https://github.com/swaywm/wlroots/issues/1438
2018-10-28backend/drm: add WLR_DRM_NO_ATOMIC_GAMMA env variableemersion
This allows the legacy interface to be used instead of atomic if needed. This is a workaround to make some Intel GPUs work (if this variable is unset) as well as to make some AMD GPUs work (if this variable is set).
2018-10-04backend/drm: add support for the link-status propertyemersion
2018-10-03output: make gamma size a size_t and gamma table constemersion
2018-09-15backend/drm: steal CRTCs from disabled outputsemersion
This commit allows outputs that need a CRTC to steal it from user-disabled outputs. Note that in the case there are enough CRTCs, disabled outputs don't loose it (so there's no modeset and plane initialization needed after DPMS). CRTC allocation still prefers to keep the old configuration, even if that means allocating an extra CRTC to a disabled output. CRTC reallocation now happen when enabling/disabling an output as well as when trying to modeset. When enabling an output without a CRTC, we realloc to try to steal a CRTC from a disabled output (that doesn't really need the CRTC). When disabling an output, we try to give our CRTC to an output that needs one. Modesetting is similar to enabling. A new DRM connector field has been added: `desired_enabled`. Outputs without CRTCs get automatically disabled. This field keeps track of the state desired by the user, allowing to automatically re-enable outputs when a CRTC becomes free. This required some changes to the allocation algorithm. Previously, the algorithm tried to keep the previous configuration even if a new configuration with a better score was possible (it only changed configuration when the old one didn't work anymore). This is now changed and the old configuration (still preferred) is only retained without considering new possibilities when it's perfect (all outputs have CRTCs). User-disabled outputs now have `possible_crtcs` set to 0, meaning they can only retain a previous CRTC (not acquire a new one). The allocation algorithm has been updated to do not bump the score when assigning a CRTC to a disabled output.
2018-08-29Use legacy modesetting for gamma controlDrew DeVault
It doesn't look like there's any motion on a fix from the AMDGPU side, and using the legacy interface for this isn't so bad.
2018-08-02Implement wlr-gamma-control-unstable-v1emersion
2018-07-09util: add wlr_ prefix to log symbolsemersion
2018-06-30drm backend: overflow fixesDominique Martinet
These operations are done in 32-bit arithmetics before being casted to 64-bit, thus can overflow before the cast. Casting early fixes the issue. Found through static analysis
2018-04-25Make sure we don't use others' prefixesemersion
2018-04-25Remove wlr_ prefix from local symbolsemersion
2018-02-12Reformat all #include directivesemersion
2018-02-10Fallback gamma on legacy if properties don't existVincent Vanlaer
2018-02-09Use VLA instead of heap allocVincent Vanlaer
2018-02-09Fix styleVincent Vanlaer
2018-02-09Free gamma when property blob creation failsVincent Vanlaer
2018-02-09Add atomic gamma lut size fetchingVincent Vanlaer
Legacy gamma lut size now uses the new legacy_crtc member of wlr_drm_crtc. This was Previously doen using old_crtc in wlr_drm_connector, but since this refers to the crtc that was connected to the ouput, this could give the wrong result.
2018-02-09Add atomic gamma settingVincent Vanlaer
2018-01-15Merge pull request #549 from emersion/output-enabledDrew DeVault
Add wlr_output::enabled
2018-01-15drm: do not pageflip when enabling outputemersion
2018-01-15Don't crash if crtc->cursor is NULLGuido Günther
Same as what atomic_crtc_set_cursor does Core was generated by `_build/rootston/rootston'. Program terminated with signal SIGSEGV, Segmentation fault. 0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170 170 if (!crtc || !crtc->cursor) { (gdb) bt 0 0xb6f28a1c in atomic_crtc_move_cursor (drm=0x1ebc8e8, crtc=0x1ead498, x=0, y=0) at ../backend/drm/atomic.c:170 1 0xb6f2a856 in wlr_drm_connector_move_cursor (output=0x2242b28, x=0, y=0) at ../backend/drm/drm.c:634 2 0xb6f3cea0 in wlr_output_cursor_set_image (cursor=0x21a0338, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4) at ../types/wlr_output.c:516 3 0xb6f39da2 in wlr_cursor_set_image (cur=0x22cfc90, pixels=0x22e1290 "", stride=24, width=24, height=24, hotspot_x=4, hotspot_y=4, scale=1) at ../types/wlr_cursor.c:310 4 0xb6f44d2a in wlr_xcursor_manager_set_cursor_image (manager=0x22cfd10, name=0x434420 "left_ptr", cursor=0x22cfc90) at ../types/wlr_xcursor_manager.c:80 5 0x00431c0a in roots_seat_configure_xcursor (seat=0x22cef08) at ../rootston/seat.c:515 6 0x0043137c in roots_seat_init_cursor (seat=0x22cef08) at ../rootston/seat.c:210 7 0x004315ec in roots_seat_create (input=0x218d220, name=0x434594 "seat0") at ../rootston/seat.c:289 8 0x0042ecba in input_get_seat (input=0x218d220, name=0x434594 "seat0") at ../rootston/input.c:39 9 0x0042ed04 in input_add_notify (listener=0x218d228, data=0x218d3b0) at ../rootston/input.c:54 10 0xb6f2f2e6 in wl_signal_emit (signal=0x1ea548c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387 11 0xb6f2f572 in input_add_reemit (listener=0x1ea9990, data=0x218d3b0) at ../backend/multi/backend.c:101 12 0xb6f2db7e in wl_signal_emit (signal=0x1ea992c, data=0x218d3b0) at /usr/include/wayland-server-core.h:387 13 0xb6f2ddaa in handle_device_added (backend=0x1ea9920, libinput_dev=0x2292598) at ../backend/libinput/events.c:87 14 0xb6f2e164 in wlr_libinput_event (backend=0x1ea9920, event=0x2292b78) at ../backend/libinput/events.c:198 15 0xb6f2d678 in wlr_libinput_readable (fd=23, mask=1, _backend=0x1ea9920) at ../backend/libinput/backend.c:28 16 0xb6f2d7c0 in wlr_libinput_backend_start (_backend=0x1ea9920) at ../backend/libinput/backend.c:74 17 0xb6f27170 in wlr_backend_start (backend=0x1ea9920) at ../backend/backend.c:30 18 0xb6f2f320 in multi_backend_start (wlr_backend=0x1ea5480) at ../backend/multi/backend.c:22 19 0xb6f27170 in wlr_backend_start (backend=0x1ea5480) at ../backend/backend.c:30 20 0x0042fbc6 in main (argc=1, argv=0xbe89dd04) at ../rootston/main.c:60
2018-01-07Fix output enable in DRM backendemersion
2017-10-02Change iface prefix to suffixScott Anderson