| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Instead of using low-level wl_shm_buffer and wlr_dmabuf_v1_buffer
APIs, use the unified wlr_buffer APIs. That way it doesn't matter
what the exact wlr_buffer implementation is used, any which provides
the necessary capabilities (data_ptr or dmabuf) would work.
Simplifies the logic a bit, and will make the transition to wlr_shm
easier.
|
|
Make it clear it's only about shm, not about DMA-BUFs.
|
|
Will allow us to simplify common shm/DMA-BUF logic later on.
|
|
Make it clear that one is for shm buffers only, and the other is
for DMA-BUF buffers only.
|
|
Stack trace:
#0 0x00007f17081f5b99 in wl_list_insert (list=list@entry=0x2d8, elm=elm@entry=0x7ffe7f7e85d0)
at ../wayland-1.21.0/src/wayland-util.c:48
#1 0x00007f17081f5f2e in wl_signal_emit_mutable (signal=signal@entry=0x2d8, data=data@entry=0x7ffe7f7e8660)
at ../wayland-1.21.0/src/wayland-server.c:2167
#2 0x00007f170815a971 in handle_switch_toggle (wlr_switch=0x2a0, event=0x55d5ba13dc00)
at ../backend/libinput/switch.c:50
#3 handle_libinput_event (event=0x55d5ba13dc00, backend=0x55d5b975d740) at ../backend/libinput/events.c:234
#4 handle_libinput_readable (fd=<optimized out>, mask=<optimized out>, _backend=<optimized out>)
at ../backend/libinput/backend.c:58
#5 handle_libinput_readable (fd=fd@entry=34, mask=mask@entry=1, _backend=_backend@entry=0x55d5b975d740)
at ../backend/libinput/backend.c:48
#6 0x00007f170815c110 in backend_start (wlr_backend=0x55d5b975d740) at ../backend/libinput/backend.c:109
#7 0x00007f1708160996 in multi_backend_start (wlr_backend=0x55d5b97583d0) at ../backend/multi/backend.c:32
|
|
|
|
CTA-861-H defines a picture aspect ratio which may be attached to
each mode. This affects the way the sink will display the image.
See annexes H.1 and H.2 for examples.
|
|
There doesn't appear to be any good reason to warp the cursor to
the top-left corner when all outputs are disconnected; it's no more
valid than any other (x,y) point in that case.
The real-world case here is a user with a single external monitor
turning it off (which apparently counts as disconnected depending
on the connection type/hardware). For that user, it's desirable to
have the cursor remain in its original location when the monitor
is turned back on.
|
|
It should be considered a bug if a compositor sets a non-finite
cursor position, so fail loudly (in debug builds) if that happens.
The existing check in wlr_cursor_warp_closest() is now redundant,
and would silently hide such bugs, so remove it.
|
|
The back buffer is no longer set at commit time since 0556aa0c5918
("output: rejigger attach/clear for back buffer").
Instead, check whether the buffer belongs to the output swapchain.
This is more robust.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3496
|
|
Introduce a function to convert a drmModeModeInfo into a new
wlr_drm_mode.
|
|
In wlr_output_attach_render(), stop setting
wlr_output.pending.buffer. This removes one footgun: using the
wlr_buffer at that stage is invalid, because rendering operations
haven't been flushed to the GPU yet. We need to wait until
output_clear_back_buffer() for the wlr_buffer to be used safely.
Instead, set wlr_output.pending.buffer in wlr_output_test() and
wlr_output_commit().
Additionally, move the output_clear_back_buffer() from
wlr_output_commit_state() to wlr_output_commit(). This reduces the
number of calls in the failure path.
|
|
We can just use pending.buffer instead. It's completely fine to
call wlr_swapchain_set_buffer_submitted() with a buffer which
doesn't come from the swapchain, in which case it's a no-op.
|
|
No need to have a separate function for this. It's only used once.
|
|
The function returns -1 if it doesn't find a suitable memory type.
|
|
See the spec at [1]. tl;dr EGL has terrible defaults: eglTerminate()
may have side-effects on completely unrelated EGLDisplay objects.
This extension allows us to opt-in to get the sane behavior:
eglTerminate() only free's our own EGLDisplay without affecting
others.
[1]: https://registry.khronos.org/EGL/extensions/KHR/EGL_KHR_display_reference.txt
|
|
This is documented to reset the gamma LUT, but we don't handle this
properly.
While at it, make sure we leave wlr_output.pending in a good state
on allocation failure.
|
|
|
|
Be consistent with other headers.
|
|
wlr_buffer.c is difficult to read because it contains a mixed bag
of unrelated things: base buffer type, buffer implementations,
buffer resource factory, and client buffer.
Split each of these into their own file.
|
|
|
|
|
|
valgrind said (on exit from labwc):
Invalid write of size 8
at 0x487DEAF: wl_list_remove (wayland-util.c:56)
by 0x487DF80: wl_signal_emit_mutable (wayland-server.c:2182)
by 0x48CD6B7: backend_destroy.part.0.lto_priv.0 (backend.c:41)
by 0x48DC19D: multi_backend_destroy (backend.c:58)
by 0x4880286: UnknownInlinedFun (wayland-server.c:2315)
by 0x4880286: wl_display_destroy (wayland-server.c:1170)
by 0x112491: UnknownInlinedFun (server.c:485)
by 0x112491: main (main.c:110)
Address 0x1f9d0210 is 112 bytes inside a block of size 136 free'd
at 0x484426F: free (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x487DF6D: wl_signal_emit_mutable (wayland-server.c:2179)
by 0x48CD6B7: backend_destroy.part.0.lto_priv.0 (backend.c:41)
by 0x48DC19D: multi_backend_destroy (backend.c:58)
by 0x4880286: UnknownInlinedFun (wayland-server.c:2315)
by 0x4880286: wl_display_destroy (wayland-server.c:1170)
by 0x112491: UnknownInlinedFun (server.c:485)
by 0x112491: main (main.c:110)
Block was alloc'd at
at 0x4846A73: calloc (in /usr/lib/valgrind/vgpreload_memcheck-amd64-linux.so)
by 0x4918D4E: drm_lease_device_v1_create (wlr_drm_lease_v1.c:639)
by 0x48D3B00: wlr_multi_for_each_backend (backend.c:249)
by 0x49191D2: wlr_drm_lease_v1_manager_create (wlr_drm_lease_v1.c:706)
by 0x111EE9: UnknownInlinedFun (server.c:384)
by 0x111EE9: main (main.c:92)
|
|
When the output doesn't support hardware cursors, these errors
will be printed. However, these errors are expected and we have a
proper fallback.
Closes: https://gitlab.freedesktop.org/wlroots/wlroots/-/issues/3457
|
|
|
|
|
|
|
|
For each format and modifier, log supported usage. Log a
human-readable format/modifier string.
|
|
|
|
ec8b49c93f869010e360bec501d61c18089fbc61 calls subsurface_consider_map()
too early. Instead, call it after emitting new_subsurface signal to let
compositors receive a map event.
|
|
|
|
Same as the previous commit.
|
|
dac040f87fee1cfdd7660aa1786b0734d95e03a4 mistakenly renamed
xdg_surface_destroy listener, which was listening to *unmap* events, to
xdg_surface_unmap. The actual fix, however, is to listen to destroy
events. This fixes various crashes.
|
|
This makes it clearer that the wlr_xdg_toplevel cannot be NULL.
|
|
This makes it clearer that the wlr_xdg_toplevel cannot be NULL.
|
|
It's an unnecessary wrapper.
|
|
It seems it was forgotten to adjust when implementing
!3461 High-resolution scroll wheel support
|
|
No need to go back to the generic wlr_renderer/wlr_texture when
passing a Vulkan renderer/texture to an internal function.
|
|
We were checking whether any of the features was supported. We need
to check if all of them are.
This makes the check consistent with query_modifier_support() above.
|
|
We don't need to store the list of enabled extensions.
While at it, rename variables to be less confusing.
|
|
These are unused.
|
|
I think the second parameter of the function should be void* instead of
void **, because we use it as a right value in the function.
Signed-off-by: fakechen <chenzigui@kylinos.cn>
Signed-off-by: sunzg <sunzhigang1@kylinos.cn>
|
|
|
|
It returns a bool, not an int.
|
|
|
|
|
|
This was previously used by the X11 backend but is no longer required
since the previous commit.
|
|
All we can do to influence adaptive sync on the X11 backend is set the
_VARIABLE_REFRESH window property like mesa automatically does. We don't
have any control beyond that, so we set the state to enabled on creating
the output and never allow changing it (just like the Wayland backend).
|
|
Adaptive sync is effectively always enabled when using the Wayland
backend. This is not something we have control over, so we set the
state to enabled on creating the output and never allow changing it.
|
