| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
Adds `wlr_buffer_resource_interface` and `wlr_buffer_register_resource_interface`,
which allows a user to register a way to create a wlr_buffer from a specific
wl_resource.
|
|
|
|
Now that we have our own wl_drm implementation, there's no reason
to provide custom renderer hooks to init a wl_display in the
interface. We can just initialize the wl_display generically,
depending on the renderer capabilities.
|
|
Co-authored-by: Simon Ser <contact@emersion.fr>
|
|
See 757e26712337 ("drm/uapi: Add USB connector type") in the kernel
tree.
|
|
This is the cause of the spurious "drmHandleEvent failed" messages
at exit. restore_drm_outputs calls handle_drm_event in a loop without
checking whether the FD is readable, so drmHandleEvent ends up with a
short read (0 bytes) and returns an error.
The loop's goal is to wait for all queued page-flip events to complete,
to allow drmModeSetCrtc calls to succeed without EBUSY. The
drmModeSetCrtc calls are supposed to restore whatever KMS state we were
started with. But it's not clear from my PoV that restoring the KMS
state on exit is desirable.
KMS clients are supposed to save and restore the (full) KMS state on VT
switch, but not on exit. Leaving our KMS state on exit avoids unnecessary
modesets and allows flicker-free transitions between clients. See [1]
for more details, and note that with Pekka we've concluded that a new
flag to reset some KMS props to their default value on compositor
start-up is the best way forward. As a side note, Weston doesn't restore
the CRTC by does disable the cursor plane on exit (see
drm_output_deinit_planes, I still think disabling the cursor plane
shouldn't be necessary on exit).
Additionally, restore_drm_outputs only a subset of the KMS state.
Gamma and other atomic properties aren't accounted for. If the previous
KMS client had some outputs disabled, restore_drm_outputs would restore
a garbage mode.
[1]: https://blog.ffwll.ch/2016/01/vt-switching-with-atomic-modeset.html
|
|
The first time wlr_buffer_from_resource is called with a wl_buffer
resource that originates from wl_shm, create a new
wlr_shm_client_buffer as usual. If wlr_buffer_from_resource is called
multiple times, re-use the existing wlr_shm_client_buffer.
This commit changes how the wlr_shm_client_buffer lifetime is managed:
previously it was destroyed as soon as the wlr_buffer was released.
With this commit it's destroyed when the wl_buffer resource is.
Apart from de-duplicating wlr_shm_client_buffer creations, this allows
to easily track when a wlr_shm_client_buffer is re-used. This is useful
for the renderer and the backends, e.g. the Pixman renderer can keep
using the same Pixman image if the buffer is re-used. In the future,
this will also allow to re-use resources in the Wayland and X11 backends
(remote wl_buffer objects for Wayland, pixmaps for X11).
|
|
wl_event_loop_add_fd was called with a NULL data argument, but the
function expects the data argument to be set to the wlr_drm_backend.
Fixes: 053ebe7c278b ("backend/drm: terminate display on drmHandleEvent failure")
|
|
Only one wl_pointer.axis_source event is permitted per frame, according
to the Wayland specification.
Fixes https://github.com/swaywm/wlroots/issues/2973
|
|
We were missing destroy calls for gestures, and we were only
destroying the relative pointer on output destroy.
|
|
No backend is using it anymore.
|
|
This is now provided by the generic wlr_output implementation.
|
|
This is now provided by the generic wlr_output implementation.
|
|
When wlr_output manages its own swap-chain, there's no need to
hook into the backend to grab DMA-BUFs. Instead, maintain a
wlr_output.front_buffer field with the latest committed buffer.
|
|
This function doesn't need the wl_resource anymore.
In the failure paths, wlr_buffer_unlock in surface_apply_damage
will take care of sending wl_buffer.release.
|
|
We don't always need to enable blending: when the texture doesn't
have alpha or when the color is opaque, we can disable it.
|
|
Use our internal pixel format table to figure out whether an
imported DMA-BUF has alpha.
|
|
Khronos refers to extensions with their namespace as a prefix in
uppercase. Change our naming to align with Khronos conventions.
This also makes grepping easier.
|
|
Khronos refers to extensions with their namespace as a prefix in
uppercase. Change our naming to align with Khronos conventions.
This also makes grepping easier.
|
|
|
|
Instead, delegate to the source wlr_buffer.
|
|
This stores a weak reference to the source buffer.
|
|
This is the first step towards dropping wlr_client_buffer.resource.
|
|
We often juggle between wlr_buffer and wlr_client_buffer variables.
Use a consistent naming: "buffer" for wlr_buffer and "client_buffer"
for wlr_client_buffer.
|
|
|
|
|
|
`wlr_client_buffer_import` is splitted in two distincts function:
- wlr_buffer_from_resource, which transforms a wl_resource into
a wlr_buffer
- wlr_client_buffer_create, which creates a wlr_client_buffer
from a wlr_buffer by creating a texture from it and copying its
wl_resource
|
|
The callee can just get it from the wlr_drm_connector.
|
|
Now that we have a test_only arg in crtc_commit, we can move the
legacy checks to legacy.c.
|
|
Right now callers of drm_crtc_commit need to check whether the
interface is legacy or atomic before passing the TEST_ONLY flag.
Additionally, the fallbacks for legacy are in-place in the common
code.
Add a test_only arg to the crtc_commit hook. This way, there's no
risk to pass atomic-only flags to the legacy function (add an assert
to ensure this) and all of the legacy-specific logic can be put back
into legacy.c (done in next commit).
|
|
A texture is opaque when it does *not* have alpha.
Fixes https://github.com/swaywm/wlroots/issues/2907
|
|
drm_surface_make_current and drm_surface_unset_current set implicit
state and are an unnecessary mid-layer. Prefer to use directly
wlr_renderer_begin_with_buffer, which automatically unsets the back
buffer on wlr_renderer_end.
I'd like to get rid of drm_surface_make_current once we stop using
it for the primary swapchain.
|
|
Some buffers need to be copied across GPUs. Such buffers need to be
allocated with a format and modifier suitable for both the source
and the destination.
When explicit modifiers aren't supported, we were forcing the buffers
to be allocated with a linear layout, because implicit modifiers
aren't portable across GPUs. All is well with this case.
When explicit modifiers are supported, we were advertising the whole
list of destination modifiers, in the hope that the source might
have some in common and might be able to allocate a buffer with a
more optimized layout. This works well if the source supports explicit
modifiers. However, if the source doesn't, then wlr_drm_format_intersect
will fallback to implicit modifiers, and everything goes boom: the
source uses a GPU-specific tiling and the destination interprets it
as linear.
To avoid this, just force linear unconditionally. We'll be able to
revert this once we have a good way to indicate that an implicit modifier
isn't supported in wlr_drm_format_set, see [1].
[1]: https://github.com/swaywm/wlroots/pull/2815
Closes: https://github.com/swaywm/wlroots/issues/3030
|
|
[1] and [2] have introduced new wl_array usage in wlroots, but
contains a mistake: wl_array_for_each iterates over pointers to
the wl_array entries, not over entries themselves.
Fix all wl_array_for_each call sites. Name the variables "ptr"
to avoid confusion.
Found via ASan:
==148752==ERROR: AddressSanitizer: attempting free on address which was not malloc()-ed: 0x602000214111 in thread T0
#0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24
#2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51
#3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306
#4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57
#5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57
#6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124
#7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e)
#8 0x55cd1a77c9e5 in server_fini ../sway/server.c:218
#9 0x55cd1a77893f in main ../sway/main.c:400
#10 0x7f6ff04bdb24 in __libc_start_main (/usr/lib/libc.so.6+0x27b24)
#11 0x55cd1a73a7ad in _start (/home/simon/src/sway/build/sway/sway+0x33a7ad)
0x602000214111 is located 1 bytes inside of 16-byte region [0x602000214110,0x602000214120)
freed by thread T0 here:
#0 0x7f6ff2235f19 in __interceptor_free /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:127
#1 0x7f6ff1c04004 in wlr_tablet_destroy ../subprojects/wlroots/types/wlr_tablet_tool.c:24
#2 0x7f6ff1b8463c in wlr_input_device_destroy ../subprojects/wlroots/types/wlr_input_device.c:51
#3 0x7f6ff1ab9941 in backend_destroy ../subprojects/wlroots/backend/wayland/backend.c:306
#4 0x7f6ff1a68323 in wlr_backend_destroy ../subprojects/wlroots/backend/backend.c:57
#5 0x7f6ff1ab36b4 in multi_backend_destroy ../subprojects/wlroots/backend/multi/backend.c:57
#6 0x7f6ff1ab417c in handle_display_destroy ../subprojects/wlroots/backend/multi/backend.c:124
#7 0x7f6ff106184e in wl_display_destroy (/usr/lib/libwayland-server.so.0+0x884e)
previously allocated by thread T0 here:
#0 0x7f6ff2236279 in __interceptor_malloc /build/gcc/src/gcc/libsanitizer/asan/asan_malloc_linux.cpp:145
#1 0x7f6ff1066d03 in wl_array_add (/usr/lib/libwayland-server.so.0+0xdd03)
[1]: https://github.com/swaywm/wlroots/pull/3002
[2]: https://github.com/swaywm/wlroots/pull/3004
|
|
The wl_touch.frame event is used to group multiple touch events
together. Instead of sending it immediately after each touch event,
rely on the backend to send it (and on the compositor to relay it).
This is a breaking change because compositors now need to manually
send touch frame events instead of relying on wlr_seat to do it.
|
|
|
|
|
|
|
|
|
|
|
|
When wlr_output.swapchain is used instead of the backend's, the
buffer_type will be set to SCANOUT even if wlr_output_attach_render
has been called. This tricks wlr_output_damage into thinking the
whole output needs to be repainted.
Workaround this issue by forcing buffer_type to RENDER when the
output has a back-buffer set.
Will clean all of that up when removing the precommit event handler
altogether.
This commit fixes damage tracking on the Wayland, X11 and headless
backends.
|
|
Right now we rely entirely on implicit sync for synchronizing
access to GPU buffers. Implicit sync works by setting
synchronization points on the buffer in writers, and letting
readers wait on these sync points before accessing the buffer.
With OpenGL, sync points are created using functions such as
eglSwapBuffers or glFlush. If none of these special functions
are called, no sync point will be created and readers will
potentially access a buffer that hasn't finished rendering yet.
In the context of wlroots, OpenGL is the writer and the backend
(KMS or parent Wayland/X11 session) is the reader. After we're
done rendering a frame, and before passing that frame to the
backend, we need to call glFlush.
glFlush is called when the buffer is detached from the renderer.
This is a task done by output_clear_back_buffer. So let's call
this function before invoking the impl->commit hook, instead of
calling it after.
All of this is maybe a little tricky to get right with the
current renderer_bind_buffer API. The new
wlr_renderer_begin_with_buffer API is much better, because glFlush
is called on wlr_renderer_end, so it's more intuitive.
Closes: https://github.com/swaywm/wlroots/issues/3020
|
|
|
|
|
|
wlr_box_rotated_bounds functions
|
|
All code-paths now invoke wlr_texture_from_buffer. De-duplicate
the calls.
|
|
The specialized client buffer implementations take care of this.
|
|
The only reason we had this was because of EGL_WL_bind_wayland_display
support, which has been dropped.
|
