aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-02-01render/egl: log whether DMA-BUF modifiers are supportedSimon Ser
2021-02-01render/egl: add check for EGL_KHR_surfaceless_contextBrandon Dowdy
As surfaces are no longer going to be used for wlr_egl, I may as well just go and add this check as it is needed for safety whenever surface-less rendering is being used.
2021-01-31xwayland/selection: make xwm_selection_init take a wlr_xwm_selection *Tudor Brindus
This makes it consistent with xwm_selection_finish.
2021-01-31xwayland/selection: introduce `xwm_selection_transfer_init`Tudor Brindus
Currently, all this does is initialize `wl_client_fd` to -1, so that comparisons with 0 are meaningful.
2021-01-31xwayland/selection: make xwm_selection_finish take a wlr_xwm_selection *Tudor Brindus
Previously it took a wlr_xwm *, which was a bit surprising in that it freed members of wlr_xwm *, not just its respective selections.
2021-01-31xwayland/selection: destroy all selections on Xwayland restartTudor Brindus
Previously, Xwayland could restart, and we'd get events for transfers pointing to the previous (now freed) xwm instance. This led to use-after-free segfaults. Closes #2565.
2021-01-31xwayland/selection: don't leak Wayland fd if ConvertSelection failsTudor Brindus
If our ConvertSelection failed, we would previously leak the pending Wayland client fd. Refs swaywm/sway#5946.
2021-01-31xwayland/selection: don't request another selection while one is pendingTudor Brindus
This will hopefully be fixed in the future by having separate windows for each X11-to-Wayland transfer, but until then, let's avoid a compositor crash.
2021-01-30examples: remove "major" and "minor" from egl_common.cBrandon Dowdy
Remove "major" and "minor" from egl_common.c as they are not used by the examples that use egl_common.c.
2021-01-29backend/wayland: remove unnecessary castSimon Ser
2021-01-29xwayland/selection: end incr transfer on empty prop, not next selectionTudor Brindus
Previously, `transfer->incr` was being cleared on the next selection. However, if the next selection was *also* incremental, it's possible that `xwm_handle_selection_property_notify` would route us to `xwm_get_incr_chunk` instead of `xwm_selection_get_data`.
2021-01-29xwayland/selection: refactor remaining incremental transfer codeTudor Brindus
2021-01-29xwayland/selection: extract out property requestsTudor Brindus
Apart from reducing duplication, this has the positive side-effect of allowing all deallocs to use `xwm_selection_transfer_destroy_property_reply`, as opposed to the latter and a mix of ad-hoc `free`s.
2021-01-29xwayland/selection: simplify incremental transfer control flowTudor Brindus
Previously, if the Wayland client died before an incremental transfer was complete, the logs would be spammed by "write error to target fd" as wlroots entered some control flow wherein it'd continually try scheduling further writes to the already-dead pipe. This commit contains no behavioral changes, but introduces explicit handling for draining the X11 selection in case of Wayland client death.
2021-01-29xwayland/selection: explicitly bail if first write to Wayland fd failsTudor Brindus
If `xwm_data_source_write` failed, it's failed permanently. In fact, a failing `xwm_data_source_write` sets `transfer->property_reply` to null as part of its error handling. Instead of relying on an indirect check (whether `transfer->property_reply` is still non-null), explicitly use the return value from `xwm_data_source_write`.
2021-01-29xwayland/selection: make `xwm_data_source_write` return 0 on failureTudor Brindus
The `fd` is marked `O_NONBLOCK`, so `write` will never spuriously return `EINTR`. Therefore, `write` failing is permanent, and we can return 0 to make the return value meaningful.
2021-01-29render/egl: remove *config_attribs and wlr_egl->configBrandon Dowdy
Breaking changes: Both "EGLint *config_attribs" and "wlr_egl->config" no longer exist.
2021-01-29render/egl: remove wlr_egl_{create,destroy}_surfaceBrandon Dowdy
Breaking changes: wlr_egl_create_surface and wlr_egl_destroy_surface have been removed and no longer exist.
2021-01-29examples: remove dependency on wlr_egl from clientsBrandon Dowdy
The specified clients in this commit used to rely on wlr_egl and some of its related functions in order to render surfaces. This is no longer the case as of this commit.
2021-01-28backend/x11: remove output_set_refreshSimon Ser
The X11 backend uses the Present extension to schedule frames. The refresh rate is unused.
2021-01-28xwayland: fix extraneous NET_WM_STATE log messagesSimon Ser
wlroots would log "Unhandled NET_WM_STATE property change" log messages for atoms we know about. Simplify the code structure and remove these extra messages.
2021-01-27render/egl: fix NULL dereference when using llvmpipeSimon Ser
Fixes: 6becc69ec90c ("render/egl: fail to create wlr_egl on software renderer")
2021-01-27render/egl: fail to create wlr_egl on software rendererSimon Zeni
The creation of `wlr_egl` will fail is the device extension EGL_MESA_device_software is defined. The creation process is allowed to continue only if the environment variable `WLR_RENDERER_ALLOW_SOFTWARE` is defined to the value 1.
2021-01-27xwayland: drop unused enum net_wm_state_actionSimon Ser
2021-01-25xwayland/selection: rename Wayland-facing data and helpersTudor Brindus
Previously, wlr_xwm_selection_transfer.source_fd meant: - the source of data in a Wayland -> X11 copy (good) - the destination of data in a X11 -> Wayland copy (confusing) This made reading through xwayland/selection/incoming.c difficult: in many places, "source" actually means "destination".
2021-01-25examples/foreign-toplevel: Add documenation and output selectionfwsmit
2021-01-25xwayland/selection: prevent fd leak on unsupported MIME typeTudor Brindus
Since we never end up calling xcb_convert_selection, the file descriptor ends up getting leaked (i.e., not cleaned up within xwm_data_source_write).
2021-01-25xwayland: use wlr_log_errno instead of %mTudor Brindus
Previously, any error would be masked by an internal isatty call: 24:31:48.174 [DEBUG] [wlr] [xwayland/selection/incoming.c:386] XCB_SELECTION_NOTIFY (selection=277, property=278, target=256) 24:31:48.174 [ERROR] [wlr] [xwayland/selection/incoming.c:30] write error to target fd: Inappropriate ioctl for device
2021-01-24backend/drm: don't blit in drm_fb_importSimon Ser
Instead blit in drm_plane_lock_surface. This makes drm_fb_import simpler and better fits its name.
2021-01-24backend/drm: simplify drm_fb_lock_surfaceSimon Ser
Make it take a plane instead, and rename to drm_plane_lock_surface.
2021-01-24backend/drm: document wlr_drm_plane surface fieldsSimon Ser
2021-01-23render/gbm_allocator: avoid drmPrimeHandleToFDSimon Ser
Some drivers (e.g. nouveau) need to do some book-keeping when exporting a BO handle to a DMA-BUF [1]. Using drmPrimeHandleToFD directly hides the export from the user-space drivers and causes some ref'counting issues. So we can't properly handle BOs with a different handle for each plane until [2] lands. [1]: https://gitlab.freedesktop.org/drm/nouveau/-/issues/43#note_772661 [2]: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/5442 Suggested-by: Ilia Mirkin <imirkin@alum.mit.edu>
2021-01-21backend/x11: keep track of exposed rects, add them to damage regionsIlia Mirkin
When we receive an Expose event, that means that we must redraw that region of the X11 window. Keep track of these regions with pixman regions, and merge them with the additional output damaged regions. Fixes #2670
2021-01-21backend/x11: skip events we don't care aboutIlia Mirkin
These are ones I see log messages about in my setup.
2021-01-21backend/x11: add support for scanout modeIlia Mirkin
This makes full-screen with weston-terminal work.
2021-01-20Revert "render: add wlr_egl_create_from_drm_fd function"Simon Ser
This reverts commit ee31be167b4e2c4682f3da6f22bddc23796f213d.
2021-01-20Revert "render/egl: remove unused gbm_device member"Simon Ser
This reverts commit 306cf11d8702c82be61e027a9bb76e27e89b34d3.
2021-01-20render/egl: remove unused gbm_device memberSimon Zeni
2021-01-20render: add wlr_egl_create_from_drm_fd functionSimon Zeni
2021-01-20backend/x11: make sure output transform matrix is initializedIlia Mirkin
The transform matrix was all 0's, which meant that effectively nothing got rendered other than the clear color.
2021-01-20Expose ICCCM input statusBrassyPanache
In certain situations windows can have their input field set to false but still expect to receive input focus by passively listening to key presses via a parent window. The ICCCM specification outlines how focus should be given to clients. Further reading: https://tronche.com/gui/x/icccm/sec-4.html#s-4.1.7 Relates to #2604
2021-01-19xdg-output: destroy outputs before managerIsaac Freund
Since output_destroy() calls wl_list_remove() on the output's link, the manager must still be valid. This is the same bug fixed in bf926e3 but with a different interface.
2021-01-18backend/x11: fix region not being actually usedSimon Ser
The region variable was shadowed in an if block. As a result, in the outer block region was always XCB_NONE and was never destroyed (causing a memory leak on the server). Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>
2021-01-18backend/x11: set a blank cursor rather than hiding globallyIlia Mirkin
This actually simplifies the logic since we no longer have to wait for enter/leave events, and also improves the UX when e.g. handling a crash with gdb attached. See #2659
2021-01-17backend/drm: fix modifiers for cursor plane buffersSimon Ser
In 93cd3a79b26c ("backend/drm: stop using GBM flags"), we stopped using the GBM_BO_USE_LINEAR flag in favor of a modifier list set to { DRM_FORMAT_MOD_LINEAR }. However, the last argument of drm_plane_init_surface disables modifiers -- so the buffer will just get allocated with an implicit modifier, without necessarily being LINEAR. To fix this, allow modifiers when allocating the cursor buffers. wlr_drm_plane.formats should already have the necessary LINEAR restrictions. Fixes: 93cd3a79b26c ("backend/drm: stop using GBM flags")
2021-01-17backend/drm: add wlr_drm_connector_get_idSimon Ser
This allows a compositor to get a KMS connector object ID from a wlr_output. The compositor can then query more information about the connector via libdrm. This gives more freedom to compositors and allows them to read KMS properties that wlroots doesn't know about. For instance, they could read the EDID or the suggested_{X,Y} properties and change their output configuration based on that.
2021-01-17backend/drm: add support for the subconnector propertySimon Ser
The subconnector property indicates the connector sub-type. This is useful because that usually indicates what kind of connector the user has plugged in to their monitor, e.g. a DisplayPort-to-DVI cable will indicate a DVI subconnector. Also some laptops have non-DP connectors that are internally linked to a DP port on the GPU. Set the output description accordingly. See https://drmdb.emersion.fr/properties/3233857728/subconnector
2021-01-17Free xwayland cursor in wlr_xwayland_destroyChris Chamberlain
One of many memory leaks detected by an asan build
2021-01-17backend/x11: add xcb_dri3_pixmap_from_buffers check for n_planesSimon Ser
Just in case.
2021-01-17backend/x11: add support for DRI3 1.0Simon Ser
Add fallbacks when DRI3 1.2 isn't supported. Closes: https://github.com/swaywm/wlroots/issues/2586
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-08 19:57:23 +0000