| Age | Commit message (Collapse) | Author |
|---|
|
Make it explicit in the protocol that [un]set_maximized and
the following configure event can't be reliably matched, and the
clients shouldn't try to do it.
Closes #106
Signed-off-by: Mikhail Gusarov <dottedmag@dottedmag.net>
|
|
Signed-off-by: Xaver Hugl <xaver.hugl@gmail.com>
|
|
Since the abbreviation "XDG" starts with a vowel sound, the correct
article is "an."
Signed-off-by: Vlad Zahorodnii <vlad.zahorodnii@kde.org>
|
|
some restrictions must be placed on this or else it becomes legal for
the compositor to place popups in unexpected locations
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
|
|
Enum entries and message arguments are sometimes preceded by a blank line, but
often aren't.
Standardize the format of the protocol specification by removing blank lines
preceding a list of message arguments and enum entries.
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
|
|
Adjust minor grammar issues, for clarity.
This patch cherry-picks some relevant changes from an earlier series,
patches 3 to 5. See:
https://lists.freedesktop.org/archives/wayland-devel/2016-April/028078.html
Signed-off-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
|
|
In order to get feedback of available space where a client can create
its popup, let it create requset that its popup rectangle being resized
would it not fit the within the work area. This adds two new constraint
adjustment values to the adjustment enum, and dimension parameters to
the xdg_popup.configure event.
The existing constraint adjustment actions take precedence, and resizing
will only be triggered if all other adjustments requested didn't manage
to make the popup rectangle fully visible.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
Instead of allocating state ranges that desktop environments can use as
they want, let them introduce their own protocol and their own enums.
If such desktop environment protocols need the configure/ack_configure
semantics, they can design their protocols to extend xdg_surface, and
make their private configure events a latched state tied to
xdg_surface.configure.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Acked-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
Make it clearer what the focus semantics are during a popup grab. In
short, when a grabbing popup is mapped, the top most popup will always
have keyboard focus, while pointer and touch focus works just as normal
except that only surfaces from the grabbing client will receive pointer
and touch focus.
This patch doesn't really change any semantics but rather clarifies
what was ambiguous before.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
|
|
xdg_positioner is a method for declarative positioning of child surfaces
(currently only xdg_popup surfaces). A client creates a description of a
positioning logic using the xdg_positioner interface. The xdg_positioner
object is then used when creating a xdg_popup for describing how the
child surface should be positioned in relation to the parent surface.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike@samsung.com>
Acked-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
Turn xdg_popup into plain temporary child surfaces without any grabbing
or mapping order requirements by default.
In order to create grabbing popup chains, a new request 'grab' is
introduced which enables more or less the same semantics and
requirements as xdg_popup previously had related to grabbing, stacking
and mapping order.
This enables using xdg_popup for creating tooltips and other user
interface elements that does not want to take an explicit grab.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike@samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
The reason for using wl_surface before was that xdg_popup and
xdg_surface (now xdg_toplevel) had no common interface other than
wl_surface, but since xdg_surface is now the base interface, lets use
that.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
The long lines stood out, break them by putting the summary on its own
line.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Benoit Gschwind <gschwind@gnu-log.net>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
It makes the structure consistent with most other protocols and
provides a clear separation between what is done by the server and what
is done by the client.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
Split out toplevel window like requests and events into a new interface
called xdg_toplevel, and turn xdg_surface into a generic base interface
which others extends.
xdg_popup is changed to extend the xdg_surface.
The configure event in xdg_surface was split up making
xdg_surface.configure an event only carrying the serial number, while a
new xdg_toplevel.configure event carries the other data previously sent
via xdg_surface.configure. xdg_toplevel.configure is made to extend,
via the latch-state mechanism, xdg_surface.configure and depends on
that event to synchronize state.
Other future xdg_surface based extensions are meant to also extend
xdg_surface.configure for relevant window type dependend state
synchronization.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Signed-off-by: Mike Blumenkrantz <zmike@samsung.com>
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Acked-by: Quentin Glidic <sardemff7+git@sardemff7.net>
|
|
Some application may wish to restrict their window in size, but
xdg-shell has no mechanism for the client to specify a maximum or
minimum size.
As a result, the compositor may try to maximize or fullscreen a window
while the client would not allow for the requested size.
Add new requests "set_max_size" and "set_min_size" to xdg-shell so that
the client can tell the compositor what would be its smallest/largest
acceptable size, and that the compositor can decide if maximize or
fullscreen is achievable, draw an accurate animation, etc.
Signed-off-by: Olivier Fourdan <ofourdan@redhat.com>
Bugzilla: https://bugzilla.gnome.org/show_bug.cgi?id=764413
Reviewed-by: Yong Bakos <ybakos@humanoriented.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
|
|
this change ensures that the client will set its initial state
before performing any drawing, ensuring that there is no mismatch
when creating a surface with a non-default state
(eg. maximize, fullscreen, ...)
looking at the following event flows:
1) wl_surface.attach, wl_surface.commit, xdg_shell.get_xdg_surface
2) wl_surface.attach, xdg_shell.get_xdg_surface, wl_surface.commit
3) xdg_shell.get_xdg_surface, wl_surface.commit, xdg_surface.configure,
wl_surface.attach, wl_surface.commit
only 3) is now valid, while 1) and 2) will trigger errors as a result
of handling buffers prior to creating the xdg surface
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
As of version 6, the new unstable protocol discovery semantics are
used, so lets remove the enum and request that made up the old one.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
|
|
This copies the version 5 of the XML to a new version 6 version, while
at the same time the interface names are changed to use the unstable
naming convention.
A whitespace cleanup was done as no git-blame:ability would be lost
anyway.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
This patch was intended to be part of the coming v6 version of the
xdg_shell protocol. It is an semantically backward incompatible change,
so it cannot be implemented in xdg_shell v5 without breaking
compatibility with available clients.
This reverts commit 275fd34023fabdcb487f2adf2fe80bda1e4bf0dc.
|
|
this change ensures that the client will set its initial state
before performing any drawing, ensuring that there is no mismatch
when creating a surface with a non-default state
(eg. maximize, fullscreen, ...)
looking at the following event flows:
1) wl_surface.attach, wl_surface.commit, xdg_shell.get_xdg_surface
2) wl_surface.attach, xdg_shell.get_xdg_surface, wl_surface.commit
3) xdg_shell.get_xdg_surface, wl_surface.commit, xdg_surface.configure,
wl_surface.attach, wl_surface.commit
only 3) is now valid, while 1) and 2) will trigger errors as a result
of handling buffers prior to creating the xdg surface
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
Signed-off-by: Mike Blumenkrantz <zmike@osg.samsung.com>
Reviewed-by: Jasper St. Pierre <jstpierre@mecheye.net>
Reviewed-by: Bryce Harrington <bryce@osg.samsung.com>
|
|
The scanner parses CDATA in <entry> but lets it disappear otherwise. To have
descriptive text associated with the <entry>, we need a <description> tag -
and that must have a summary attribute. The current scanner doesn't handle
<description> however, so to get the summary printed in the output file we
still need the summary attribute in the entry tag too.
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Reviewed-by: Derek Foreman <derekf@osg.samsung.com>
Reviewed-by: Jonas Ådahl <jadahl@gmail.com>
|
|
This migration did not involve any renaming, xdg_shell already has its
own form of unstable protocol semantics. The next xdg_shell protocol
change will change to the new naming semantics, and not earlier in
order to minimize breakage.
Signed-off-by: Jonas Ådahl <jadahl@gmail.com>
|
