aboutsummaryrefslogtreecommitdiff
path: root/swaymsg
AgeCommit message (Collapse)Author
2023-02-02swaymsg: s/inactive/disabled/Simon Ser
The JSON field is named "active", but that's confusing for users: `output disable` is the command which results in `active = false` outputs. Use the same terminology in end-user messages.
2023-02-02swaymsg: print output power statusSimon Ser
2023-02-01Added reference for event types to swaymsg manpageCedric Sodhi
2022-10-03swaymsg: show mode picture aspect ratioSimon Ser
2022-09-19swaymsg: show non-desktop property when pretty printing outputsAlex Maese
2022-07-26swaymsg: fix floating_nodes being ignoredllyyr
Fix floating_nodes being ignored in pretty_print_tree.
2021-12-21swaymsg: add GET_TREE pretty-printingSimon Ser
2021-12-21swaymsg: replace if with switch in pretty_printSimon Ser
2021-10-25refactor: use JSON_MAX_DEPTH everywhereJason Nader
2021-10-22refactor: use sway_abort insteadSefa Eyeoglu
2021-10-22fix: use sane value for json_tokener max_depthSefa Eyeoglu
INT_MAX causes a NULL pointer if there is not enough memory available to fit (INT_MAX * sizeof(struct json_tokener_srec)).
2021-10-22fix: handle NULL from json_tokener_new_exSefa Eyeoglu
if there is not enough memory to fit json_tokener and (depth * json_tokener_srec) in RAM, don't segfault.
2021-10-18swaymsg: fix misplaced return valueJason Nader
2021-10-18swaymsg: be explicit about the json parser errorJason Nader
2021-10-18swaymsg: use INT_MAX max JSON depth when parsing IPC responseJason Nader
Same reasoning as fe11caeac946cecda491d592044a6b9519ef2035. Without this, swaymsg would fail with a cryptic error message when the JSON was nested too deep.
2021-10-15cross-reference further documentationJonas Große Sundrup
2021-10-15change incorrectly documented output typesJonas Große Sundrup
2021-10-15clarify the type of raw outputJonas Große Sundrup
2021-02-04Make command line option lists constManuel Stoeckl
2021-01-16Changed fprintf(stdout,...) to printf(...) for more readable codeSpizzyCoder
2021-01-15swaymsg: use 3 digits for fractional part of the refresh rateRonan Pigott
The fractional part of the real number we want to represent never has more than 3 decimal digits, so use 3 decimal digits of precision. e.g. 'swaymsg -t get_outputs' would show a refresh rate of 59934 mHz as 59.933998 Hz, now correctly as 59.934 Hz.
2020-09-04swaymsg.1: expand tip for multi-word strings.Érico Rolim
Strings with commas inside, such as the ones used for xkb_{config,layout} commands, count as multi-word strings.
2020-08-05swaymsg.1: correct typoMark Stosberg
2020-07-15Add note on quoting to swaymsg manpageCampbell Vertesi
2020-06-14i3-compat: add GET_BINDING_STATE IPC commandJason Nader
2020-03-07Add adaptive_sync_status to output IPC replySimon Ser
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-17Add max_render_time to output JSONIvan Molodetskikh
2019-09-12swaymsg.1: fix typosMartin Michlmayr
2019-09-10swaymsg.1: fix description of --prettyMartin Michlmayr
2019-08-13swaymsg.1: add tip about two hyphens for commandsBrian Ashworth
This adds a tip to the command section about using two hyphens before a command to signal that no swaymsg options will follow to allow for sway commands with leading hyphens.
2019-08-06swaymsg: return 2 for sway errorsBrian Ashworth
This mirrors a change in i3 4.17 that returns 2 for errors from sway, including invalid command, command failed, and invalid subscription requests
2019-06-07Add the missing constant for the switch input typeAbdelhakim Qbaich
2019-05-03swaymsg: fix quiet error reportingBrian Ashworth
This makes it so swaymsg still returns the correct successful or failed error code when in quiet mode
2019-04-17swaymsg: add timeout and type checksBrian Ashworth
This adds a 3 second timeout to the initial reply in swaymsg. This prevents swaymsg from hanging when `swaymsg -t get_{inputs,seats}` is used in i3. The timeout is removed when waiting for a subscribed event or monitoring for subscribed events. This also adds type checks to commands where i3 does not reply with all of the properties that sway does (such as `modes` in `get_outputs`). This is mostly just a behavioral adjustment since swaymsg should run on i3. When running under i3, some command reply's (such as the one for `get_outputs) may have more useful information in the raw json than the pretty printed version.
2019-04-16Send disabled output available modes on IPC get_outputsRanieri Althoff
- Also fix missing trailing newline on pretty print Signed-off-by: Ranieri Althoff <1993083+ranisalt@users.noreply.github.com>
2019-04-14Add heuristics to differentiate touchpadsBenjamin Cheng
Use libinput_device_config_tap_get_finger_count to determine whether a pointer is a touchpad. swaymsg is also updated to reflect the new touchpad type.
2019-03-24Add support for manually setting subpixel hinting on outputs.Geoff Greer
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this. Addresses https://github.com/swaywm/sway/issues/3163
2019-03-16Flush stdout in swaymsg when in subscribe modeFlakebi
2019-03-08Add -p/--pretty option to swaymsgPeter Grayson
This new option forces pretty (non-raw/non-JSON) output. By default, when not using a tty, swaymsg outputs using the "raw" format. This makes it impossible to, for example, pipe the pretty output to a pager such as `less` since piping does not use a tty. The new -p/--pretty option gives the user explicit control over the output format while retaining the default tty-dependent behavior. Signed-off-by: Peter Grayson <pete@jpgrayson.net>
2019-03-07ipc: describe libinput device configurationBrian Ashworth
This adds the device configurations to the ipc response for libinput devices. Only supported configuration options for the device will be added. This also moves `libinput_send_events` inside a new `libinput` object that contains the rest of the configuration options. sway-ipc(7) has been updated to reflect the changes and document the new additions.
2019-02-27Add sway-ipc.7.scd to document IPC protocolBrian Ashworth
This add `sway-ipc.7.scd` that documents the IPC protocol. This also increased the minimum scdoc version from 1.8.1 to 1.9.0 to allow for table cells to be continued on the following line
2019-02-11ipc: handle unnamed xkb_active_layout_nameBrian Ashworth
If the active xkb_layout does not have a name, use `NULL` instead of `json_object_new_string(NULL)`. This also makes it so swaymsg will pretty print this as `(unnamed)`.
2019-01-23Make json-c include respect pkg-config --cflagsJan Beich
json-c.pc contains `Cflags: -I${includedir}/json-c`, so `<json-c/json.h>` won't be found unless the parent directory is searched by default.
2019-01-21Removed unused wlroots dependency for sway(bg|bar|msg|nag)M Stoeckl
Also remove direct libm dependency where unused.
2019-01-21Replace wlr_log with sway_logM Stoeckl
This commit mostly duplicates the wlr_log functions, although with a sway_* prefix. (This is very similar to PR #2009.) However, the logging function no longer needs to be replaceable, so sway_log_init's second argument is used to set the exit callback for sway_abort. wlr_log_init is still invoked in sway/main.c This commit makes it easier to remove the wlroots dependency for the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-18meson: remove rpath optionsemersion
2019-01-09get_inputs: add libinput send events modeBrian Ashworth
Add `libinput_send_events` to the IPC output for `get_inputs` to allow scripting of mode changes.
2019-01-01Remove readline.cIan Fan
All occurrences of read_line have been replaced by getline. peek_line has been absorbed into detect_brace.
2018-11-28swaymsg: parse success of single objectBrian Ashworth
Allows swaymsg to parse the success attribute of a single object response. This is needed for the subscribe event.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 09:32:36 +0000