aboutsummaryrefslogtreecommitdiff
path: root/sway
AgeCommit message (Collapse)Author
2019-01-15seatop_begin_down: raise floatingBrian Ashworth
In `seatop_begin_down`, raise the floating container. This appears to have been dropped in the transition to seatops.
2019-01-15Do not send ipc_event_shutdown from ipc clientBrian Ashworth
In `sway_terminate`, `ipc_event_shutdown` was being sent regardless which mode sway was running in. When running as an ipc client, `sway_terminate` should just exit
2019-01-15cursor: send clear_focus on hide and enter event on unhideRouven Czerwinski
Clear the focus when we hide the cursor and show it again during the unhide action. The unhide function will rebase the cursor after the unhide. Tested by looking at the WAYLAND_DEBUG=1 output of termite. Also call cursor_handle_activity before sending pointer events to send the enter events to the surface if the cursor was hidden before. Fixes #3431
2019-01-15Remove wlr_xdg_surface_send_close.Connor E
2019-01-15Do not damage view child when container is NULLBrian Ashworth
In `view_child_damage`, do not damage the surface if it has been unmapped or if the container is NULL.
2019-01-15Handle hidden scratchpad containers in commandsBrian Ashworth
This fixes the handling of hidden scratchpad containers for some commands. For the most part, this just prevents running the commands on hidden scratchpad containers, but there are some commands that have some special handling for them.
2019-01-15Fix invalid pointers when using resize grow width on first/last siblingsRyan Dwyer
2019-01-15Resize only current and immediate siblings rather than all siblingsRyan Dwyer
For example, create layout V[view view view] and resize the leftmost view using mod+rightclick. Previously, the edge between view 2 and 3 would be adjusted as well. Now this edge will remain constant, which matches the behaviour of i3. To do this operation correctly, the resize tiling seatop now keeps track of two containers, as the container that resizes horizontally will be a different container to the one which resizes vertically (one will be an ancestor). The tiling resize seatop now figures out these containers during the start of the operation and keeps references to them in the event. A new function container_find_resize_parent has been introduced to do this. This function is also used by the resize command. During cursor motion, the seatop logic is similar to before, but now has to choose the correct container to resize. In resize.c, container_resize_tiled and resize_tiled have been merged into one. One of them originally did nothing except pass the values through to the other. container_resize_tiled now takes a simplified approach where it just finds the immediate siblings on either side and resizes them without worrying about the others. The parellel_coord and parallel_size functions are no longer needed and have been removed.
2019-01-14Disarm key repeat on reloadBrian Ashworth
When resetting the keyboard during reload, disarm the key repeat on all keyboards since the bindings (and possibly keyboard) will be freed before the key repeat can go off.
2019-01-14Remove now-unused "input" argument of cmd_results_newM Stoeckl
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))` applied to `cmd_results_new`. String usage constants have been converted from pointers to arrays when encountered. General handler format strings were sometimes modified to include the old input string, especially for unknown command errors.
2019-01-14Remove 'input' field of IPC command return jsonM Stoeckl
This field is not in i3 and provides imprecise and redundant information. (Specifically, when swaymsg is given a list of commands, the IPC return array already indicates precisely which number command failed; knowing the name of the command is not useful when multiple commands of the same type are provided.)
2019-01-14Use uint32_t where resize axis might contain a bitfieldRyan Dwyer
2019-01-14Replace resize_axis with wlr_edgesRyan Dwyer
This patch removes the resize_axis enum in favour of wlr_edges. As wlr_edges has no `horizontal` or `vertical` value, it denotes these by bitwise `or`ing the left/right and up/down values. Two constants are defined to make it easier to refer to these. This will allow the tiling resize seatop to utilise the functions in this file. resize_axis was local to the resize command and couldn't be exposed in function arguments.
2019-01-13Merge pull request #3144 from emersion/cmd-xwaylandDrew DeVault
Add xwayland command
2019-01-13Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improvedDrew DeVault
Improve mouse button parsing: bar mouse bindings
2019-01-13Merge pull request #3343 from RedSoxFan/seat-cursor-buttons-improvedDrew DeVault
Improve mouse button parsing: seat cursor buttons
2019-01-13Merge pull request #3342 from RedSoxFan/scroll-buttons-improvedDrew DeVault
Improve mouse button parsing: input scroll_button
2019-01-13Merge pull request #3402 from RyanDwyer/refactor-seatopsDrew DeVault
Refactor seat operations to use an interface
2019-01-13Merge pull request #3388 from RedSoxFan/reset-inputs-on-reloadDrew DeVault
reload: reset input configs
2019-01-13Merge pull request #3397 from RedSoxFan/fix-swaybar-heightDrew DeVault
swaybar: obey height if given
2019-01-13Merge pull request #3398 from RedSoxFan/toggle-input-eventsDrew DeVault
input events: toggle and ipc get_inputs
2019-01-13Merge pull request #3408 from RedSoxFan/bar-paddingDrew DeVault
swaybar: adjustable status padding
2019-01-11config: fix line number with continued linesBrian Ashworth
When the config has continued lines, `get_line_with_cont` may read more than one line of the actual file. When displaying line numbers for error messages, they should be the line number in the file to make it easy to find and fix the issue.
2019-01-11config: do not reset pos when braces foundBrian Ashworth
When a brace is found, the config file should not seek back to before the brace, otherwise the brace will be read multiple times.
2019-01-11swaybar: add status_edge_padding commandBrian Ashworth
This adds the bar subcommand `status_edge_padding <padding>` to set the padding used when the status line is on the right edge of the bar.
2019-01-11swaybar: add status_padding commandBrian Ashworth
Adds the bar subcommand `status_padding <padding>` which allows setting the padding used for swaybar. If `status_padding` is set to `0`, blocks will be able to take up the full height of the bar.
2019-01-10input_cmd_scroll_button: utilize mouse btn helpersBrian Ashworth
This modifies `input_cmd_scroll_button` to utilize the mouse button helper `get_mouse_button` when parsing the button. x11 axis buttons are not supported with this command and `CMD_INVALID` will be returned, but all other x11 buttons, button event names, and button event codes should be working
2019-01-10bar_cmd_bind: utilize mouse button helpersBrian Ashworth
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing mouse buttons. This also introduces `cmd_bar_bindcode`, which will use `get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the two commands are encapsulated in a single file with shared code. This also modifies swaybar to operate off of event codes rather than x11 button numbers, which allows for any mouse button to be used. This introduces two new IPC properties: - For `get_bar_config`, `event_code` has been added to the `bindings` section and will include to event code for the button. If the event code can be mapped to a x11 button, `input_code` will still be the x11 button number. Otherwise, `input_code` will be `0`. - Likewise for `click_events`, `event` has been added and will include the event code for the button clicked. If the event code can be mapped to a x11 button, `button` will still be the x11 button number. Otherwise, `button` will be `0`.
2019-01-10seat_cmd_cursor: utilize mouse button helpersBrian Ashworth
This modifies `seat_cmd_cursor` to utilize `get_mouse_button` when parsing mouse buttons for the `press` and `release` operations. All x11 buttons, button event names, and button event codes are supported. For x11 axis buttons, `dispatch_cursor_axis` is used instead of `dispatch_cursor_button`. However the `press`/`release` state is ignored and the either axis event is processed. This also removes support for `left` and `right` in favor of `BTN_LEFT` and `BTN_RIGHT`.
2019-01-10Merge pull request #3400 from ianyfan/config-braceemersion
config.c: fix brace detection at end of file
2019-01-10Refactor seat operations to use an interfaceRyan Dwyer
This splits each seat operation (drag/move tiling/floating etc) into a separate file and introduces a struct sway_seatop_impl to abstract the operation. The move_tiling_threshold operation has been merged into move_tiling. The main logic for each operation is untouched aside from variable renames. The following previously-static functions have been made public: * node_at_coords * container_raise_floating * render_rect * premultiply_alpha * scale_box
2019-01-10config.c: fix brace detection at end of fileIan Fan
2019-01-10Merge pull request #3341 from RedSoxFan/mouse-bindings-improvedIan Fan
Improve mouse button parsing: helpers and bind{code/sym}
2019-01-10Merge pull request #3399 from RedSoxFan/fix-output-destruction-segfaultsemersion
Fix segfaults on output destruction
2019-01-10Fix segfaults on output destructionBrian Ashworth
This fixes two causes of segfaulting when an output is destroyed. The first occurred when an output was never enabled. The issue was that the destroy signal was never initialized so when it was emitted, sway segfaulted. This was fixed by moving the initialization into `output_create` since all outputs, regardless of whether they have ever been enabled, will be destroyed at some point. The second occurred when the cursor was on an output that was being destroyed. The sway output would have already been removed, but if there are other outputs, a cursor rebase would still occur. Since the wlr_output still existed and the sway output was destroyed, the cursor could be over nothing, resulting in a segfault when trying to get the sway output, which was destroyed.
2019-01-09get_inputs: add libinput send events modeBrian Ashworth
Add `libinput_send_events` to the IPC output for `get_inputs` to allow scripting of mode changes.
2019-01-09input_cmd_events: implement toggleBrian Ashworth
Implements toggling input events during runtime. This will not attempt to toggle to a mode that is not supported by the device. When toggling the wildcard input, the device specific input configs are altered. Each device will cycle one supported mode.
2019-01-09swaybar: obey height if givenBrian Ashworth
If there is a bar height given, use that as the height rather than as a minimum height. This matches i3-gaps behavior.
2019-01-09cursor: allow scrolling tabs/stack on title borderBrian Ashworth
This allows tabbed and stacked containers to be scrolled through when the cursor is over the border of the title bar. The borders around the other three edges of the contents should not be affected by this change.
2019-01-09bind{code,sym}: utilize mouse button helpersBrian Ashworth
This modifies `bindcode` and `bindsym` to use `get_mouse_bindcode` and `get_mouse_bindsym`, respectively, to parse mouse buttons. Additionally, the `BINDING_MOUSE` type has been split into `BINDING_MOUSECODE` and `BINDING_MOUSESYM` to match keys and allow for mouse bindcodes to be used. Between the two commands, all button syms and codes should be supported, including x11 axis buttons.
2019-01-09Add helpers for improved mouse button parsingBrian Ashworth
The following helper functions have been added to aid with parsing mouse buttons from a string: 1. `get_mouse_bindsym`: attempts to parse the string as an x11 button (button[1-9]) or as an event name (ex BTN_LEFT or BTN_SIDE) 2. `get_mouse_bindcode`: attempts to parse the string as an event code and validates that the event code is a button (starts with `BTN_`). 3. `get_mouse_button`: this is a conveniency function for callers that do not care whether a bindsym or bindcode are used and attempts to parse the string as a bindsym and then bindcode. None of these functions are used in this commit. The sole purpose of this commit is to make the larger set more granular and easier to review/manipulate. There will be a series of commits following this one that will modify any command which uses a mouse button to use these helpers.
2019-01-09reload: reset input configsBrian Ashworth
This resets all input options to their defaults on reload. This also fixes some debug log typos in `input_manager_libinput_config_pointer`.
2019-01-09Reset container dimensions when moving into workspace from directionRyan Dwyer
2019-01-09Simplify evdev includes on FreeBSD by relying on up-to-date packageJan Beich
evdev-proto is installed by a dependency, so some files have been missed: In file included from ../sway/input/cursor.c:3: /usr/local/include/libevdev-1.0/libevdev/libevdev.h:30:10: fatal error: 'linux/input.h' file not found #include <linux/input.h> ^~~~~~~~~~~~~~~ ../swaybar/i3bar.c:3:10: fatal error: 'linux/input-event-codes.h' file not found #include <linux/input-event-codes.h> ^~~~~~~~~~~~~~~~~~~~~~~~~~~
2019-01-09Merge pull request #3386 from RedSoxFan/seat-reload-waitemersion
reload: apply seat cfgs after reading entire cfg
2019-01-09Merge pull request #3390 from RedSoxFan/execute-seatemersion
cmd_bind: pass the seat to execute_command
2019-01-09Merge pull request #3389 from RedSoxFan/swap-context-seatemersion
cmd_swap: use handler context seat
2019-01-09cmd_bind: pass the seat to execute_commandBrian Ashworth
`seat_execute_command` was incorrectly setting `config->handler_context.seat` before calling `execute_command`. Since `execute_command` was being called with a `NULL` seat argument, `execute_command` was setting `config->handler_context.seat` to the default seat. This resulted in all bindings being executed on the default seat and causing undesired behavior for devices on other seats.
2019-01-09cmd_swap: use handler context seatBrian Ashworth
Use the handler context seat instead of the default seat
2019-01-09keyboard: update repeat timer before executionBrian Ashworth
Since the keyboard can be destroyed by executing a binding (reloading with a different seat attachment config), update the repeat timer before executing the binding.