| Age | Commit message (Collapse) | Author |
|---|
|
This fixes a typo in set_middle_emulation where it would set left
handed instead of middle emulation.
|
|
This adds a libinput_config change type to the input event for when
the libinput config for a device changes
In order for this to be possible to track, the libinput config code
had to be refactored. It is now extracted into a separate file to
isolate it from the rest of the input management code.
|
|
This adds an ipc event related to input devices. Currently the
following changes are supported:
- added: when an input device becomes available
- removed: when an input device is no longer available
- xkb_keymap_changed: (keyboards only) the keymap changed
- xkb_layout_changed: (keyboards only) the effective layout changed
|
|
Adds a new commend "xkb_file", which constructs the internal
xkb_keymap from a xkb file rather than an RMLVO configuration.
This allows greater flexibility when specifying xkb configurations.
An xkb file can be dumped with the xkbcomp program.
|
|
Instead of using container->width/height as both the input and output
of the layout calculation have container->width_fraction/height_fraction
as the share of the parent this container occupies and calculate the
layout based on that. That way the container arrangement can always be
recalculated even if width/height have been altered by things like
fullscreen.
To do this several parts are reworked:
- The vertical and horizontal arrangement code is ajusted to work with
fractions instead of directly with width/height
- The resize code is then changed to manipulate the fractions when
working on tiled containers.
- Finally the places that manipulated width/height are adjusted to
match. The adjusted parts are container split, swap, and the input
seat code.
It's possible that some parts of the code are now adjusting width and
height only for those to be immediately recalculated. That's harmless
and since non-tiled containers are still sized with width/height
directly it may avoid breaking other corner cases.
Fixes #3547
Fixes #4297
|
|
This adds checks to the input_manager_libinput_reset_* functions to
only attempt resetting supported options on reload. This should have no
functional difference to the user, but will remove several `Failed to
apply libinput config: Unsupported configuration option` lines from the
log that can be noisy and potential red herrings.
|
|
This adds a --reload flag to cmd_bindswitch that allows for the binding
to be executed on reload. One possible use case for this is to allow
users to disable outputs when the lid closes and enable them when the
lid opens without having to open and re-close the lid after a reload.
|
|
Now the highlighted center area of containers triggers a swap action
instead of moving around the containers.
|
|
Can be used to change the orientation of a touchscreen.
Example usage with swaymsg:
# identity
swaymsg input type:touch calibration_matrix '"1 0 0 0 1 0"'
# 90 degree clockwise
swaymsg input type:touch calibration_matrix '"0 -1 1 1 0 0"'
# 180 degree clockwise
swaymsg input type:touch calibration_matrix '"-1 0 1 0 -1 1"'
# 270 degree clockwise
swaymsg input type:touch calibration_matrix '"0 1 0 -1 0 1"'
Documentation:
https://wayland.freedesktop.org/libinput/doc/latest/absolute-axes.html#calibration-of-absolute-devices
|
|
This adds the logic to defer binding execution while sway is still
initializing. Without this, the binding command would be executed, but
the command handler would return CMD_DEFER, which was being treated as
a failure to run. To avoid partial executions, this will defer all
bindings while config->active is false.
|
|
Before the delta input config is stored, this attempts to compile a
keymap with it. If the keymap fails to compile, then the first line of
the xkbcommon log entry will be included with a `CMD_FAILURE`, the
entire xkbcommon log entry will be included in the sway error log, and
the delta will not be stored.
This only handles basic issues such as a layouts not existing. This
will NOT catch more complex issues such as when a variant does
exist, but not for the given layout (ex: `azerty` is a valid variant,
but the `us` layout does not have a `azerty` variant).
|
|
|
|
Commit 190546fd315a24c04006fb1b177069933f4350da failed to consider the
edge case where xwayland is disabled via the sway config. This leads to
a SEGFAULT when setting the xwayland cursor since the xwayland server is
not running.
|
|
New 'seat <name> xcursor_theme <theme> [<size>]' command that
configures the default xcursor theme.
The default seat's xcursor theme is also propagated to XWayland, and
exported through the XCURSOR_THEME and XCURSOR_SIZE environment
variables. This is done every time the default seat's configuration is
changed.
|
|
This changes the behavior of bindings to make the `BINDING_LOCKED` flag
conflicting, which will allow for both unlocked and locked bindings.
If there are two matching bindings and one has `--locked` and the other
does not, the one with `--locked` will be preferred when locked and
the one without will be preferred when unlocked.
If there are two matching bindings and one has both a matching
`--input-device=<input>` and `--locked` and the other has neither, the
former will be preferred for both unlocked and locked.
This also refactors `get_active_binding` in `sway/input/keyboard.c`
to make it easier to read.
|
|
This just changes the indentation of `sway/input/switch.c` to use
tabs instead of spaces since I messed up and missed it when approving
the PR that added the file.
|
|
This attempts to use the default keymap when the one defined in the
input config fails to compile. The goal is to make it so the keyboard
is always in a usable state, even if it is not the user's requested
settings as usability is more important.
This also removes the calls to `getenv` for the `XKB_DEFAULT_*` family
of environment variables. The reasoning is libxkbcommon will fallback
to using those (and then the system defaults) when any of the rule
names are `NULL` or an empty string anyway so there is no need for
sway to duplicate the efforts.
|
|
|
|
|
|
|
|
|
|
|
|
This fixes the criteria for emitting a `bar_state_update` event to
notify swaybar (and any other bars utilizing the event) on whether the
bar is visible by modifier. It is not enough to only emit the event
when both the bar mode and bar hidden state are `hide` since it is
possible to release the modifier while hidden state is `show` and then
change hidden state to `hide` without pressing the modifier. This also
emits the event whenever visible by modifier is set and should no
longer be regardless of the mode and state to ensure that it gets
properly cleared. If visible by modifier is not set and the bar is not
in `hide`/`hide`, then no events will be sent and visible by modifier
will not be set
|
|
Add support for configurations that apply to a type of inputs
(i.e. natural scrolling on all touchpads). A type config is
differentiated by a `type:` prefix followed by the type it
corresponds to.
When new devices appear, the device config is merged on top of its
type config (if it exists). New type configs are applied on top of
existing configs.
|
|
Use libinput_device_config_tap_get_finger_count to determine whether
a pointer is a touchpad.
swaymsg is also updated to reflect the new touchpad type.
|
|
When setting fullscreen on a hidden scratchpad container, there was a
check to see if there was an existing fullscreen container on the
workspace so it could be fullscreen disabled first. Since the workspace
is NULL, it would cause a SIGSEGV. This adds a NULL check to avoid the
crash.
This also changes the behavior of how fullscreen is handled when adding
a container to the scratchpad or changing visibility of a scratchpad
container to match i3's. The behavior is as follows:
- When adding a container to the scratchpad or hiding a container back
into the scratchpad, there is an implicit fullscreen disable
- When setting fullscreen on a container that is hidden in the
scratchpad, it will be fullscreen when shown (and fullscreen disabled
when hidden as stated above)
- When setting fullscreen global on a container that is hidden in the
scratchpad, it will be shown immediately as fullscreen global. The
container is not moved to a workspace and remains in the
scratchpad. The container will be visible until fullscreen disabled
or killed. Since the container is in the scratchpad, running
`scratchpad show` or `move container to scratchpad` will have no
effect
This also changes `container_replace` to transfer fullscreen and
scratchpad status.
|
|
|
|
* Create layout S[V[view view] view]
* Drag bottom view to the top
* Sway would crash when the cursor hovers the V[view view] title while
dragging
|
|
This commit adds support for laptop lid and tablet
mode switches as provided by evdev/libinput and
handled by wlroots.
Adds a new bindswitch command with syntax:
bindswitch <switch>:<state> <command>
Where <switch> is one of:
tablet for WLR_SWITCH_TYPE_TABLET_MODE
lid for WLR_SWITCH_TYPE_LID
<state> is one of:
on for WLR_SWITCH_STATE_ON
off for WLR_SWITCH_STATE_OFF
toggle for WLR_SWITCH_STATE_TOGGLE
(Note that WLR_SWITCH_STATE_TOGGLE doesn't map to
libinput and will trigger at both on and off events)
|
|
Firstly, this fixes a recent regression where having
`focus_follows_mouse yes` and hovering an inactive tab caused it to gain
focus. The code was missing a view_is_visible check.
The code is handling the logic for both focus_follows_mouse yes and
focus_follows_mouse always, where the latter will apply when nudging the
mouse after a workspace switch. However, the view_is_visible check
didn't apply when using focus_follows_mouse always, so hovering a tab
with that configuration would cause is to focus. This was a bug. When
adding the view_is_visible check, it now applies to both yes and always.
Note that the comment about the split container was wrong. At this point
the hovered node cannot be a split container because it passed the
node_is_view check. The comment has been removed.
Lastly, the else condition is completely removed. This didn't appear to
have any practical use. Setting focus to the result of
seat_get_focus_inactive is very likely going to be a no op. There is a
slim chance that this will break something, and if so I'd like to find
out what so it can be properly documented in the code.
|
|
This feature has served its purpose. It's better to use IPC now.
|
|
This introduces a `default` seat operation which is used when no mouse
buttons are being held. This means there is now always a seat operation
in progress. It allows us to separate `default` code from the standard
cursor management code.
The sway_seatop_impl struct has gained callbacks `axis`, `rebase` and
`end`, and lost callbacks `finish` and `abort`. `axis` and `rebase` are
only used by the default seatop. `end` is called when a seatop is being
replaced by another one and allows the seatop to free any resources,
though no seatop currently needs to do this. `finish` is no longer
required, as each seatop can gracefully finish in their `button`
callback. And `abort` is not needed, as calling `end` would achieve the
same thing. The struct has also gained a bool named allow_set_cursor
which allows the client to set a new cursor during `default` and `down`
seatops.
Seatops would previously store which button they were started with and
stop when that button was released. This behaviour is changed so that it
only ends once all buttons are released. So you can start a drag with
$mod+left, then click and hold right, release left and it'll continue
dragging while the right button is held.
The motion callback now accepts dx and dy. Most seatops don't use this
as they store the cursor position when the seatop is started and compare
it with the current cursor position. This approach doesn't make sense
for the default seatop though, hence why dx and dy are needed.
The pressed_buttons array has been moved from the sway_cursor struct to
the default seatop's data. This is only used for the default seatop to
check bindings. The total pressed button count remains in the
sway_cursor struct though, because all the other seatops check it to
know if they should end.
The `down` seatop no longer has a `moved` property. This was used to
track if the cursor moved and to recheck focus_follows_mouse, but seems
to work without it.
The logic for focus_follows_mouse has been refactored. As part of this
I've removed the call to wlr_seat_keyboard_has_grab as we don't appear
to use keyboard grabs.
The functions for handling relative motion, absolute motion and tool
axis have been changed. Previously the handler functions were
handle_cursor_motion, handle_cursor_motion_absolute and
handle_tool_axis. The latter two both called cursor_motion_absolute.
Both handle_cursor_motion and cursor_motion_absolute did very similar
things. These are now simplified into three handlers and a single common
function called cursor_motion. All three handlers call cursor_motion. As
cursor_motion works with relative distances, the absolute and tool axis
handlers convert them to relative first.
|
|
|
|
This moves setting `seat->prev_workspace_name` from `workspace_switch`
to `set_workspace`. `workspace_switch` is only called when using a
`workspace` command to change the workspace so any workspace change
based on criteria was not altering `seat->prev_workspace_name`. By
moving it to `set_workspace`, which is called by `seat_set_focus`, it
will change any time focus changes to a node on a different workspace
|
|
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes
output_get_in_direction adding buffer coords to layout coords.
|
|
By the time seatop_allows_events was called, seatop_impl was already
NULL, causing the function to always return false. This means a press
event was sent to clients without a corresponding release event.
This patch moves the call to seatop_finish to after the
seatop_allows_events check.
|
|
It turns out sending button events during all seat operations is not
desirable. This patch introduces a new property
`seatop_impl.allows_events` which allows each operation to define
whether button events should be passed to the surface or not.
The `down` seat operation is the only one that supports this. As all the
other seatops don't support it, the calls to seat_pointer_notify_button
prior to starting them have been removed.
|
|
Allows both BackSpace and Shift+BackSpace to be bound under the US
keyboard layout, per #3705.
|
|
|
|
|
|
If two cursor buttons are pressed at the same time, the client will now
be notified of the second button press.
The main reason for not sending the concurrent presses was due to an
early return in dispatch_cursor_button if a seatop is in progress. This
patch makes it call seat_pointer_notify_button prior to returning. But
it also has to make sure there's not a mismatch in events such as a
release without a press.
Prior to this patch, the down seatop would send press and release events
in its begin and finish functions. No other seatops did this. A press
event would be sent prior to starting tiling drag, but never an
associated release.
After this patch, no seatops send their own press or release events. We
send them prior to calling the seatop begin functions, then the first
part of dispatch_cursor_button handles all presses during seatops and
when releasing the seatop.
|
|
This changes the way zero (which is the default) is interpreted for both
the width and height of `floating_maximum_size`. It now refers to the
width and height of the entire output layout, which matches i3's
behavior.
This also removes duplicated code to calculate the floating constraints
in three files. Before this, `container_init_floating` used two-thirds
of the workspace width/height as the max and the entire workspace
width/height was used everywhere else. Now, all callers use a single
function `floating_calculate_constraints`.
|
|
All seat operations except "down" eat the button pressed event and don't send
it to clients. Thus, when ending such seat operations we shouldn't send the
button released event.
This commit moves the logic used to send pressed/released into the "down"
operation.
|
|
If node_at_coords does an early return without setting these values, they can be
used uninitialized later. Initialize both to zero.
|
|
The node variable is not used before its reassigned later in the function,
remove the assignement.
|
|
|
|
If an unmanaged or layer surface is focused when an output gets
disabled and an empty workspace on the output was focused by the seat,
the seat needs to refocus it's focus inactive to update the value of
`seat->workspace`.
|
|
To match i3's behavior, this allows mouse bindings to be triggered over
a workspace when `--whole-window` is given.
|
|
This modifies the places where output_get_active_workspace is called to
handle a NULL result. Some places already handled it and did not need a
change, some just have guard off code blocks, others return errors, and
some have sway_asserts since the case should never happen. A lot of this
is probably just safety precautions since they probably will never be
called when `output_get_active_workspace` is not fully configured with a
workspace.
|
|
|
