| Age | Commit message (Collapse) | Author |
|---|
|
Use an early return to make the code more readable.
|
|
|
|
|
|
This was a input-inhibit concept.
|
|
This reverts commit afde6369
"seat: avoid unneeded reloading xcursor theme".
Always avoiding to reload the xcursor theme prevents reloading the
cursor even when this is desired. Instead seat_configure_xcursor
can determine whether a full reload is necessary.
To stay with the spirit of the reverted change, cursors are only fully
reloaded, if the theme has changed.
Fixes #6931
|
|
Fully reconfiguring all input devices on output change takes a
loooong time. Let's just reconfigure what we need: only mappings
depend on outputs.
|
|
seat_apply_input_mapping is a lot more descriptive.
|
|
Switch devices cannot be mapped to an output/region, stop trying
to do so.
|
|
We support the standard idle-notify protocol since Sway 1.8.
|
|
Sway has two knobs to control idling:
- seat idle_inhibit: when the seat is active (ie. not idle), this
extends the active state. When the seat is idle, this is
ignored.
- seat idle_wake: when the seat is idle, this wakes up the seat.
When the seat is active, this is ignored.
The motivation for the deprecation is two-fold:
- The concept of "seat idle state" is ill-defined. Each idle-notify-v1
client will pass a different idle timeout. With the old logic, a
seat was declared idle if and only if all idle-notify-v1 timeouts have
expired. However, if only a portion of the timeouts have expired,
then some clients would wake up, and the rest would stay active.
This is inconsistent with the definition of idle_inhibit/idle_wake:
idle_inhibit was used for clients which are waking up.
- It never worked properly with the new idle-notify-v1 protocol
and no-one noticed. Only the legacy KDE idle protocol is taken
into account, but that protocol is not used anymore.
|
|
"left_ptr" is the legacy XCursor name. "default" is the cursor
spec name.
|
|
This allows for layer shell surfaces to receive focus while the surface is explicitly focused, i.e allowing
text fields to receive keyboard input just like a regular surface.
|
|
|
|
|
|
This lets us easily add rendering state that we need in the future
|
|
|
|
Atm we got issue with the touch position sent to the clients. While
holding contact, leaving the initial container will continue to send
motion event to the client but with the new local position from the new
container.
This seatop goal is to send the position of the touch event, relatively
to the initial container layout position.
|
|
We were never sending any pointer event to ext-session-lock
surfaces.
|
|
Additionally, rename the function responsible for switching focus to
match its behavior better.
|
|
When we reload the config, we reset every input device and re-apply
configuration from the config file. This means that the keyboard keymap
is updated at least once during config reload, more if the config file
contains keyboard configuration.
When they keyboard keymap changes and is updated through wlr_seat, the
keymap ends up sent to every keyboard bound in every client, seemingly
multiple times. On an x230 of mine with a keyboard layout set in the
config file, I see 42 keymap events sent to foot on config reload.
Reduce events from keyboard configurations by skipping all but the
currently active keyboard for the seat, and by clearing the active
keyboard during input manager device reset. After this change, I only
see a single just-in-time keymap event.
Fixes: https://github.com/swaywm/sway/issues/6654
|
|
|
|
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3861
|
|
Remove the incorrect attempt to block focus changes when an input grab
is present and replace it with the same logic used for layer_shell-based
screen lockers: restore the focus after changing it.
This fixes a use-after-free of seat->workspace if outputs are destroyed
while a screen lock is enabled.
|
|
When removing outputs, it is possible to end up in a situation where
none of the session lock client's surfaces have keyboard focus,
resulting in it not receiving keyboard events. Track the focused
surface and update it as needed on surface destroy.
|
|
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3753
|
|
|
|
|
|
|
|
References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3626
Closes: https://github.com/swaywm/sway/issues/7077
|
|
Co-authored-by: Michael Weiser <michael.weiser@gmx.de>
|
|
Fixes #6968
|
|
|
|
|
|
|
|
|
|
|
|
Fix: #6861
Added seat_device_destroy function to seat_device_destroy function.
|
|
|
|
We currently track the focus of a seat in two ways: we use a list called
focus_stack to track the order in which nodes have been focused, with
the first node representing what's currently focused, and we use a
variable called has_focus to indicate whether anything has focus--i.e.
whether we should actually treat that first node as focused at any given
time.
In a number of places, we treat has_focus as implying that a focused
node exists. If it's true, we attempt to dereference the return value of
seat_get_focus(), our helper function for getting the first node in
focus_list, with no further checks. But this isn't quite correct with
the current implementation of seat_get_focus(): not only does it return
NULL when has_focus is false, it also returns NULL when focus_stack
contains no items.
In most cases, focus_stack never becomes empty and so this doesn't
matter at all. Since focus_stack stores a history of focused nodes, we
rarely remove nodes from it. The exception to this is when a node itself
goes away. In that case, we call seat_node_destroy() to remove it from
focus_stack and free it. But we don't unset has_focus if we've removed
the final node! This lets us get into a state where has_focus is true
but seat_get_focus() returns NULL, leading to a segfault when we try to
dereference it.
Fix the issue both by updating has_focus in seat_node_destroy() and by
adding an assertion in seat_get_focus() that ensures focus_stack and
has_focus are in sync, which will make it easier to track down similar
issues in the future.
Fixes #6395.
[1] There's some discussion in #1585 from when this was implemented
about whether has_focus is actually necessary; it's possible we could
remove it entirely, but for the moment this is the architecture we have.
|
|
|
|
When issuing a focus command on a specific container, users expect to
proceed it even if is hidden by a fullscreen window.
This matches the behavior of i3.
|
|
Detect whether an output is built-in via its type. Detect whether
a touchscreen or tablet tool is built-in via its ID_PATH property.
|
|
Pending state is currently inlined directly in the container struct,
while the current state is in a state struct. A side-effect of this is
that it is not immediately obvious that pending double-buffered state is
accessed, nor is it obvious what state is double-buffered.
Instead, use the state struct for both current and pending.
|
|
|
|
This fixes a dangling reference which causes a use-after-free.
|
|
This fixes use-after-free when seat_destroy() has been called.
|
|
This fixes a crash that happens when input_method_new or text_method_new
events are emitted after the seat has been freed.
|
|
Fixes #5847.
|
|
To query whether a container is sticky, checking `con->is_sticky` is
insufficient. `container_is_floating_or_child` must also return true;
this led to a lot of repetition.
This commit introduces `container_is_sticky[_or_child]` functions, and
switches all stickiness checks to use them. (Including ones where the
container is already known to be floating, for consistency.)
|
|
This commit switches focusing behavior to force a warp when executing
`focus mode_toggle`.
Fixes #5772.
|
