aboutsummaryrefslogtreecommitdiff
path: root/sway/desktop
AgeCommit message (Collapse)Author
2020-12-20Test output before direct scan-outSimon Ser
This avoids some log spam. Eventually when we wire up the atomic test commit this will take care of the other log spam referenced below. References: https://github.com/swaywm/sway/pull/5010 References: https://github.com/swaywm/wlroots/issues/2181 Closes: https://github.com/swaywm/wlroots/issues/2532
2020-12-07Add layer shell subsurfacesVlad Pănăzan
Damage subsurfaces created by layer surfaces on map, unmap and commit. This fixes the flicker of Gtk Popovers. Fixes #5617
2020-11-24xdg_shell: allow views to change geometry anytimeRonan Pigott
Currently, when sway sends a configure with some geometry and the client responds with a different geometry in a commit that acks that configure, sway ignores the new size. Sway applies the surface geometry it had requested to the container, not what was actually committed, in the following transaction. This change allows any client commit to change its surface geometry, even if it is a response to a configure event.
2020-11-16Log which output is using direct scan-outSimon Ser
2020-10-19transaction: make transaction collapsing smarter with > 2 viewsTudor Brindus
Sway maintains a list of pending transactions, and tries to merge consecutive transactions applying to the same views into one. Given a pending transactions list on views {A, B, C} of: A -> A' -> A'' -> B -> B' -> B'' Sway will collapse the transactions into just A'' -> B''. This works fine when doing things like resizing views by their border. However, when interactively resizing layouts like H[V[A B] C], we end up with pending transaction lists like: A -> B -> C -> A' -> B' -> C' -> A'' -> B'' -> C'' Previously, Sway would not be able to simplify this transaction list, and execute many more transactions than would be necessary (the final state is determined by {A'', B'', C''}). After this commit, the transaction list gets simplified to A'' -> B'' -> C'', resolving performance problems (that were particularly noticeable with high-refresh-rate mice). Fixes #5736.
2020-10-18transaction: validate X transaction completions by geometry, not sizeTudor Brindus
Xwayland views are aware of their coordinates, so validating transaction completions should take into account the reported coordinates of the view. Prior to this commit they didn't, and matching dimensions would suffice to validate the transaction. Also introduced `transaction_notify_view_ready_immediately` to support the fix from d0f7e0f without jumping through hoops to figure out the geometry of an `xdg_shell` view.
2020-10-18transaction: don't reconfigure X views unless integral coords changedTudor Brindus
Sway logical coordinates are doubles, but they get truncated to integers when sent to Xwayland through `xcb_configure_window`. X11 apps will not respond to duplicate configure requests (from their truncated point of view) and cause transactions to time out. Fixes #5035.
2020-10-18xwayland: listen to `set_geometry` eventTudor Brindus
Closes #5735, refs #3007. This makes the "Search everywhere" dialog in JetBrains IDEs movable.
2020-10-10xwayland: support views that change override-redirect statusTobias Langendorf
2020-10-04desktop/render: show indicators for top-level splitTudor Brindus
i3 shows indicators for the workspace-level pseudo-split, but Sway does not, as of b977c02. This commit replaces the floating container check with a call to `container_is_floating`, which has some more robust checks in place. Fixes #5699.
2020-09-19check parent surface before it is destroyedJohn Mako
2020-09-04Re-focus on parent surface if it is availableBrassyPanache
My primary issue was IntelliJ IDEA's code suggestion pop-up not returning focus to the active editing window. I have spent some time looking at the changes of @Xyene (#5398) and @RyanDwyer (#2103). I think my proposed change maintains the status quo for the most part whilst fixing my focus issue. I have verified that @Xyene's fix for IntelliJ sub-menus still works. I have done basic testing which consists of: - Chrome - IntelliJ IDEA 2020.2.1 - VSCode - Alacritty It seems to hold up. I at least didn't see any obvious errors. Relates to #3007
2020-08-27Use wlr_output_event_commitSimon Ser
Instead of listening to both transform and scale events, we can listen to the commit event and use the new wlr_output_event_commit struct to decide what to do. This de-duplicates some of the work we were doing twice when an output was re-configured. Depends on [1]. [1]: https://github.com/swaywm/wlroots/pull/2315
2020-07-30Fix incorrect format specifiersAntonin Décimo
2020-07-22Fix X11 clients getting stuck minimizedTobias Langendorf
Usually it should be enough to simply not grant a client's minimize request, however some applications (Steam, fullscreen games in Wine) don't wait for the compositor and minimize anyway, getting them stuck in an unrecoverable state. Restoring them immediately lead to heavy flickering when unfocused on my test application (Earth Defense Force 5 via Steam), so it's preferable to grant their request without actually minimizing and then restoring them once they are in focus again.
2020-07-18desktop: output: Scale custom output refresh rateAndri Yngvason
This fixes an issue with wlr-output-management causing the frame rate to jump to 60000 Hz when setting a custom mode.
2020-07-14xdg_shell: schedule configure on maximize requestsRonan Pigott
2020-07-13input: implement xdg_toplevel interactive resize hintsRonan Pigott
2020-07-10config/output: don't change output state before commitSimon Ser
Previously, we called output_disable prior to wlr_output_commit. This mutates Sway's output state before the output commit actually succeeds. This results in Sway's state getting out-of-sync with wlroots'. An alternative fix [1] was to revert the changes made by output_disable in case of failure. This is a little complicated. Instead, this patch makes it so Sway's internal state is never changed before a successful wlr_output commit. We had two output flags: enabled and configured. However enabled was set prior to the output becoming enabled, and was used to prevent the output event handlers (specifically, the mode handler) from calling apply_output_config again (infinite loop). Rename enabled to enabling and use it exclusively for this purpose. Rename configure to enabled, because that's what it really means. [1]: https://github.com/swaywm/sway/pull/5521 Closes: https://github.com/swaywm/sway/issues/5483
2020-06-30output: simplify loop over layer surfacesIsaac Freund
2020-06-30transaction: Mark client resize immediately readyKenny Levinsen
If a client commits a new size on its own, we create a transaction for the resize like any other. However, this involves sending a configure and waiting for the ack, and wlroots will not send configure events when there has been no change. This leads to transactions timing out. Instead, just mark the view ready immediately by size when the client is already ready, so that we avoid waiting for an ack that will never come. Closes: https://github.com/swaywm/sway/issues/5490
2020-06-17Add support for viewporterSimon Ser
Depends on [1]. [1]: https://github.com/swaywm/wlroots/pull/2092
2020-06-05Save transform during transactionKalyan Sriram
Closes: https://github.com/swaywm/sway/issues/5412
2020-06-03shells: Resize on commit if geometry x/y changesKenny Levinsen
Client-side decorations lead to changes to y position, so make sure we catch that.
2020-06-03container: Remove useless surface dimensionsKenny Levinsen
The adjustments to resize logic left them unnecessary.
2020-06-03transaction: Improve transaction commentaryKenny Levinsen
Some comments where slightly misleading.
2020-06-03transaction: Account for full size when centering contentKenny Levinsen
The centering logic needs to take borders, titlebars and CSDs into account. Instead of using the main surface geometry, use the container and view geometry, which account for this.
2020-06-03view: Save all buffers associated with viewKenny Levinsen
During the execution of a resize transaction, the buffer associated with a view's surface is saved and reused until the client acknowledges the resulting configure event. However, only one the main buffer of the main surface was stored and rendered, meaning that subsurfaces disappear during resize. Iterate over all, store and render buffers from all surfaces in the view to ensure that correct rendering is preserved.
2020-06-01xwayland: pass focus to previous unmanaged surface on unmapTudor Brindus
This is necessary because some applications (e.g. Jetbrains IDEs) represent their multi-level menus as unmanaged surfaces, and when closing a submenu, the main menu should get input focus. Closes #5347.
2020-05-29Add views idle inhibition status in get_tree outputDamien Tardy-Panis
Fixes #5286
2020-05-21Fix typos in commentsMartin Michlmayr
2020-04-10Render layer shell popups over the top layerDavid96
2020-04-10output: remove damage listeners in damage destroyRouven Czerwinski
Instead of removing the destroy listeners in the output destroy, remove them in the damage destroy handler. Fixes the following use after free: ==646625==ERROR: AddressSanitizer: heap-use-after-free on address 0x61200017cab8 at pc 0x0000004f8f29 bp 0x7ffdf465ad30 sp 0x7ffdf465ad20 WRITE of size 8 at 0x61200017cab8 thread T0 #0 0x4f8f28 in wl_list_remove ../common/list.c:181 #1 0x43dd24 in handle_destroy ../sway/desktop/output.c:790 (`wl_list_remove(&output->damage_destroy.link);` here, 214e3030e1dce master branch) #2 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29 #3 0x7f0e57390954 in wlr_output_destroy ../types/wlr_output.c:365 #4 0x7f0e5735e37f in backend_destroy ../backend/x11/backend.c:128 #5 0x7f0e57348147 in wlr_backend_destroy ../backend/backend.c:47 #6 0x7f0e57356f75 in multi_backend_destroy ../backend/multi/backend.c:54 #7 0x7f0e5735710e in handle_display_destroy ../backend/multi/backend.c:107 #8 0x7f0e573f23e4 in wl_display_destroy (/lib64/libwayland-server.so.0+0x93e4) #9 0x42f0b2 in server_fini ../sway/server.c:177 #10 0x42dd01 in main ../sway/main.c:414 #11 0x7f0e570f7041 in __libc_start_main (/lib64/libc.so.6+0x27041) #12 0x40e3bd in _start (/opt/wayland/bin/sway+0x40e3bd) 0x61200017cab8 is located 120 bytes inside of 320-byte region [0x61200017ca40,0x61200017cb80) freed by thread T0 here: #0 0x7f0e57aa9357 in __interceptor_free (/lib64/libasan.so.6+0xb0357) #1 0x7f0e5738b877 in wlr_output_damage_destroy ../types/wlr_output_damage.c:143 #2 0x7f0e5738b2b9 in output_handle_destroy ../types/wlr_output_damage.c:13 #3 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29 #4 0x7f0e57390954 in wlr_output_destroy ../types/wlr_output.c:365 #5 0x7f0e5735e37f in backend_destroy ../backend/x11/backend.c:128 #6 0x7f0e57348147 in wlr_backend_destroy ../backend/backend.c:47 #7 0x7f0e57356f75 in multi_backend_destroy ../backend/multi/backend.c:54 #8 0x7f0e5735710e in handle_display_destroy ../backend/multi/backend.c:107 #9 0x7f0e573f23e4 in wl_display_destroy (/lib64/libwayland-server.so.0+0x93e4) previously allocated by thread T0 here: #0 0x7f0e57aa9887 in __interceptor_calloc (/lib64/libasan.so.6+0xb0887) #1 0x7f0e5738b532 in wlr_output_damage_create ../types/wlr_output_damage.c:91 #2 0x43e4a7 in handle_new_output ../sway/desktop/output.c:875 #3 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29 #4 0x7f0e57357261 in new_output_reemit ../backend/multi/backend.c:143 #5 0x7f0e573a1c93 in wlr_signal_emit_safe ../util/signal.c:29 #6 0x7f0e5736030a in wlr_x11_output_create ../backend/x11/output.c:253 #7 0x7f0e5735e309 in backend_start ../backend/x11/backend.c:113 #8 0x7f0e573480fb in wlr_backend_start ../backend/backend.c:36 #9 0x7f0e57356e61 in multi_backend_start ../backend/multi/backend.c:31 #10 0x7f0e573480fb in wlr_backend_start ../backend/backend.c:36 #11 0x42f4ba in server_start ../sway/server.c:205 #12 0x42dbd7 in main ../sway/main.c:394 #13 0x7f0e570f7041 in __libc_start_main (/lib64/libc.so.6+0x27041) Fixes #5158
2020-04-08Add test-only support to wlr-output-management-unstable-v1Simon Ser
Use the new test_output_config function to implement wlr-output-management-unstable-v1's test request.
2020-04-08Stop checking wlr_output_attach_buffer return valueSimon Ser
Update for [1]. Everything is now checked at commit-time. [1]: https://github.com/swaywm/wlroots/pull/2097
2020-03-30change apply_exclusive() to closer match layer shell protocolLeon Plickat
With these changes, sway will respect positive exclusive zones of layer surfaces anchored to one or three sides. This matches the protocol, which states that a positive exclusive zone should be respected, "if the surface is anchored to one edge or an edge and both perpendicular edges". If the surfaces is "anchored to only two perpendicular edges (a corner), anchored to only two parallel edges or anchored to all edges a positive value will be treated the same as zero".
2020-03-10Null check sway_layer_surface when checking damageTadeo Kondrak
Before this change, an overlay layer-shell surface without a buffer attached would segfault the compositor on screen damage.
2020-03-06Use wlr_client_bufferSimon Ser
Update for breaking changes in [1]. [1]: https://github.com/swaywm/wlroots/pull/2043
2020-03-06Drop sway_output.surface_needs_frameSimon Ser
wlr_output_schedule_frame now sets output->needs_frame [1], so this isn't needed anymore. [1]: https://github.com/swaywm/wlroots/pull/2053
2020-03-06Only schedule a frame if client has requested a frame callbackSimon Ser
When a client hasn't damaged its surface, we only need to schedule an output frame if the client has requested a frame callback.
2020-03-04Make handle_destroy and output_repaint_timer_handler staticSimon Ser
2020-02-26Add support for wlr-output-power-management-unstable-v1Simon Ser
2020-02-25Revert "Don't apply exclusive zones of unmapped layer-shell surfaces"Brian Ashworth
This reverts commit e1eda8a09c15780e7f6ab0b6a1ab7e811a3d8764.
2020-02-24Don't apply exclusive zones of unmapped layer-shell surfacesSimon Ser
Backport of [1]. [1]: https://github.com/emersion/rootston/pull/15/files
2020-02-19Fix get_int_prop(WINDOW_TYPE) crashSimon Ser
2020-02-11Call apply_output_config instead of output_enableSimon Ser
apply_output_config will call output_enable if necessary. This fixes a lone wlr_output_enable call (without a matching wlr_output_commit call) which was a no-op.
2020-02-06Fix seat_set_focus_layer crash when disabling outputSimon Ser
This fixes the following crash: #0 0x00007f7daac3af25 in raise () at /usr/lib/libc.so.6 #1 0x00007f7daac24897 in abort () at /usr/lib/libc.so.6 #2 0x00007f7daac24767 in _nl_load_domain.cold () at /usr/lib/libc.so.6 #3 0x00007f7daac33526 in () at /usr/lib/libc.so.6 #4 0x0000555bfbc35029 in seat_set_focus_layer (seat=0x555bfd76d860, layer=0x555bfdda2ff0) at ../sway/input/seat.c:1164 __PRETTY_FUNCTION__ = "seat_set_focus_layer" __PRETTY_FUNCTION__ = "seat_set_focus_layer" #5 0x0000555bfbc35029 in seat_set_focus_layer (seat=seat@entry=0x555bfd76d860, layer=0x555bfdda2ff0) at ../sway/input/seat.c:1164 __PRETTY_FUNCTION__ = "seat_set_focus_layer" #6 0x0000555bfbc25899 in handle_output_destroy (listener=0x555bfdb90688, data=<optimized out>) at ../sway/desktop/layer_shell.c:263 layer = 0x555bfdd6b040 sway_layer = 0x555bfdb90610 seat = 0x555bfd76d860 client = 0x555bfdb76d70 set_focus = <optimized out> #7 0x0000555bfbc5b669 in wl_signal_emit (data=0x555bfd795930, signal=0x555bfd795ae0) at /usr/include/wayland-server-core.h:472 l = <optimized out> next = 0x555bfdb6a3e8 __PRETTY_FUNCTION__ = "output_disable" index = <optimized out> #8 0x0000555bfbc5b669 in output_disable (output=output@entry=0x555bfd795930) at ../sway/tree/output.c:263 __PRETTY_FUNCTION__ = "output_disable" index = <optimized out> #9 0x0000555bfbc3b890 in apply_output_config (oc=0x555bfd7d73d0, output=output@entry=0x555bfd795930) at ../sway/config/output.c:321 wlr_output = 0x555bfd7afaf0 scale = <optimized out> output_box = <optimized out> #10 0x0000555bfbc28309 in handle_output_manager_apply (listener=0x555bfbc7f148 <server+488>, data=0x555bfdca6eb0) at ../sway/desktop/output.c:936 wlr_output = <optimized out> output = 0x555bfd795930 oc = <optimized out> server = 0x555bfbc7ef60 <server> config = 0x555bfdca6eb0 config_head = 0x555bfdb79350 ok = true #11 0x00007f7dab4fbf7c in wlr_signal_emit_safe (signal=<optimized out>, data=0x555bfdca6eb0) at ../subprojects/wlroots/util/signal.c:29 pos = 0x555bfbc7f148 <server+488> l = 0x555bfbc7f148 <server+488> cursor = {link = {prev = 0x555bfbc7f148 <server+488>, next = 0x7fff238a8390}, notify = 0x7f7dab4fbef0 <handle_noop>} end = {link = {prev = 0x7fff238a8370, next = 0x555bfd7419f8}, notify = 0x7f7dab4fbef0 <handle_noop>} #12 0x00007f7daa45469a in ffi_call_unix64 () at /usr/lib/libffi.so.6 #13 0x00007f7daa453fb6 in ffi_call () at /usr/lib/libffi.so.6 #14 0x00007f7daae6f82f in () at /usr/lib/libwayland-server.so.0 #15 0x00007f7daae6c193 in () at /usr/lib/libwayland-server.so.0 #16 0x00007f7daae6d7f2 in wl_event_loop_dispatch () at /usr/lib/libwayland-server.so.0 #17 0x00007f7daae6c39c in wl_display_run () at /usr/lib/libwayland-server.so.0 This crash happens because focus can only be set on mapped surfaces.
2020-01-16desktop/output: fix mem leak in handle_new_outputBrian Ashworth
This fixes a memory leak of oc (the output config) in handle_new_output. Output configs returned from find_output_config are not stored and need to be freed after use.
2020-01-13Fix unreliable scaling filterSimon Ser
Two changes were made: - Bind the texture before glTexParameteri - Set the scaling filter before each wlr_render_texture_with_matrix call Logging in wlroots allows to check that the scaling filter is properly set prior to rendering. Fixes: 6968fb3123e6 ("add scale_filter output config option") Closes: https://github.com/swaywm/sway/issues/4798
2020-01-05render: do not render indicator on floating viewsBrian Ashworth
This adds a check to make it so the indicator is only rendered on views with a parent, which floating views do not. Since floating views do not have a parent, the workspace layout was being incorrectly used to determine whether to show the split indicator previously. This has no impact on floating containers and a view within a floating container will still have indicators rendered appropriately.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 21:30:58 +0000