aboutsummaryrefslogtreecommitdiff
path: root/sway/config
AgeCommit message (Collapse)Author
2022-01-31chore: chase wlr_output_layout_get_box() updateKirill Primak
https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3439
2021-11-25sway: replace noop_output by fallback_outputSimon Zeni
wlroots removed the support for the noop backend. Instead we rely on the headless backend to provide the fallback output.
2021-11-23Add 'output render_bit_depth [8|10]' commandManuel Stoeckl
This makes it possible to hint to the renderer and backends how many bits per channel the buffers that the compositor draws windows onto should have. Renderers and backends may deviate from this if they do not support the formats with higher bit depth.
2021-10-30Bump RLIMIT_NOFILESimon Ser
Wayland compositors handle many file descriptors: client connections, DMA-BUFs, sync_files, wl_data_device pipes, and so on. Bump the limit to the max. Closes: https://github.com/swaywm/sway/issues/6285
2021-09-28Add support for DRM panel orientationSimon Ser
References: https://github.com/swaywm/wlroots/pull/3205
2021-08-31Add `output modeline` commandDavid Rosca
Only works with DRM backend.
2021-08-12Fallback to other output modes if preferred mode failsSimon Ser
Sometimes the preferred mode is not available due to hardware constraints (e.g. GPU or cable bandwidth limitations). In these cases it's better to fallback to lower modes than to end up with a black screen.
2021-06-05sway: restore SIGPIPE handler before exec:ing swaybarDaniel Eklöf
Sway ignores SIGPIPE (by installing a SIG_IGN handler), in order to “prevent IPC from crashing Sway”. SIG_IGN handlers are the *only* signal handlers inherited in sub-processes. As such, we should be a good citizen and restore the SIGPIPE handler to its default handler. Original bug report: https://www.mail-archive.com/debian-bugs-dist@lists.debian.org/msg1806907.html
2021-06-03config: Fix swaybar pango_markup inconsistencyDaniel Otero
Until now, swaybar did not have pango markup enabled by default, even if the sway config had it on. This patch aims to mimic the i3 behavior, but maintaining the functionality of the "pango_markup" sway config command.
2021-02-24output: Reconfigure xcursor when applying output configTadeo Kondrak
Before this commit, when an output had its scale dynamically changed, Sway would not load a cursor theme with the new scale. This results in stale cursor images when moving the cursor into an area controlled by the compositor, like the background or resize areas. To reproduce: - Using IPC, set an output scale to a value that isn't currently used - Move the cursor into a compositor-controlled area - The cursor will not change
2021-01-15config/output: correct refresh rate rounding errorRonan Pigott
2020-10-30hide_cursor: Add an option to hide when typingTamir Zahavi-Brunner
Add an option for the `hide_cursor` command to hide the cursor when typing, i.e. whenever a key is pressed.
2020-10-12input/tablet: add tool_mode option to set tablet tools as relative inputTudor Brindus
Closes #4139.
2020-10-11Add support for workspace_min_width bar option.Tarmack
2020-07-10config/output: don't change output state before commitSimon Ser
Previously, we called output_disable prior to wlr_output_commit. This mutates Sway's output state before the output commit actually succeeds. This results in Sway's state getting out-of-sync with wlroots'. An alternative fix [1] was to revert the changes made by output_disable in case of failure. This is a little complicated. Instead, this patch makes it so Sway's internal state is never changed before a successful wlr_output commit. We had two output flags: enabled and configured. However enabled was set prior to the output becoming enabled, and was used to prevent the output event handlers (specifically, the mode handler) from calling apply_output_config again (infinite loop). Rename enabled to enabling and use it exclusively for this purpose. Rename configure to enabled, because that's what it really means. [1]: https://github.com/swaywm/sway/pull/5521 Closes: https://github.com/swaywm/sway/issues/5483
2020-06-19input: disable events for map_to_output devices when output not presentTudor Brindus
Fixes #3449.
2020-06-05Use new wlroots API for clearing keyboard/pointer focus during grabsThomas Hebb
We are not allowed to do what we did in #5222 and pass a `NULL` surface wlr_seat_pointer_notify_enter(), and it's causing crashes when an xdg-shell popup is active (see #5294 and swaywm/wlroots#2161). Instead, solve #5220 using the new wlroots API introduced in swaywm/wlroots#2217.
2020-04-26config/output: reconfigure input devices after full output initTudor Brindus
Previously in 3de1a39, it "worked by accident" in my testing since the display being used in `map_to_output` was initialized first (the map would not be applied because the display hadn't actually come online yet), and was followed by a second display (at which point the map would get applied for the first display). Refs #5231
2020-04-24config/output: reconfigure input devices on new outputTudor Brindus
Some input rules, like `map_to_output`, are dependent on a specific screen being present. This currently does not work for hotplugged outputs, or outputs that are processed after the input device is initially probed. This commit fixes both cases, by reconfiguring inputs on each output addition. Fixes #5231.
2020-04-09Don't add disabled outputs back to output layoutSimon Ser
Return early from apply_output_config if the output is disabled. This restores our previous behavior [1]. [1]: https://github.com/swaywm/sway/commit/0cdcf66bbccfeb1e3a8191cedd5f824bb27776a6#diff-4f65f4327e987fef8ec3796cdb07644eL349
2020-04-09Fix initial modesetSimon Ser
An if branch takes care of the case where the output needs to be turned off (DPMS'ed or disabled). The other branch needs to unconditionally enable the output. output->current_mode is already taken care of in apply_config. Sorry about that, probably made a bad change by mistake after my DRM testing. Closes: https://github.com/swaywm/sway/issues/5193
2020-04-08Introduce test_output_configSimon Ser
This function checks whether the backend would accept an output configuration, without applying the changes.
2020-03-11commands: Add shortcuts_inhibitor commandMichael Weiser
Add a command to influence keyboard shortcuts inhibitors. In its current form it can be used to activate, deactivate or toggle an existing inhibitor on the surface currently receiving input. This can be used to define an escape shortcut such as: bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate It also allows the user to configure a per-seat default of whether keyboard inhibitors are honoured by default (the default) or not. Using the activate/toggle command they can then enable the lingering inhibitor at a later time of their choosing. As a side effect this allows to specifically address a named seat for actions as well, whatever use-case that might serve. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-07Add an adaptive_sync output commandSimon Ser
This enables/disables adaptive synchronization on the output. For now, the default is disabled because it might cause flickering on some hardware if clients don't submit frames at regular enough intervals. In the future an "auto" option will only enable adaptive sync if a fullscreen client opts-in via a Wayland protocol.
2020-02-16output: fix updating output manager configBrian Ashworth
The output manager config is created when the output is created. It is updated when the mode, transform, scale, or layout for the output changes, as well as, when the output is destroyed. Since the output->enabled property was not being set before calling apply_output_config, the output event handlers were early returning and never updating the output manager config when the output state was committed. This fixes the issue by setting output->enabled in apply_output_config below the output disabling section. There are also a few other minor changes that are required to function. Additionally, this renames output_enable to output_configure to better describe the recent changes.
2020-02-13Fix crash: use wlr_output->name instead of possibly missing oc->nameYorick van Pelt
Fixes segfault on start: https://gist.github.com/yorickvP/89eccb3782c6edb22aeda6ce9c6d4fcb
2020-02-11Apply the output scale filter after the output commitSimon Ser
The smart output filter uses the current output scale.
2020-02-11Stop calling apply_output_config from output_enableSimon Ser
The only output_enable caller is now apply_output_config. Stop calling apply_output_config from output_enable to simplify the code and avoid the back-and-forth between these two functions. output_enable is now the symmetric of output_disable: it just marks the output as enabled and performs bookkeeping (e.g. creating teh default workspace). It is called from apply_output_config after the output commit, so that it can read the current output state and act accordingly. This change also allows us to avoid an extraneous wlr_output_commit. References: https://github.com/swaywm/sway/issues/4921
2020-02-11Fix output scale auto-detectionSimon Ser
Closes: https://github.com/swaywm/sway/issues/4960
2020-01-16output: apply oc to outputs using wl_for_each_safeBrian Ashworth
If applying an output config to an output fails, the output may be destroyed. To be able to handle this situation correctly, apply_output_config_to_outputs needs to use wl_list_for_each_safe.
2019-12-31Fix sway_log using non initialised output_config pointerPaul Riou
This fixes a crash where the `oc->name` would be accessed by sway_log() even when `oc` was NULL.
2019-12-30Re-add support for wlr_output's atomic APISimon Ser
This reverts commit 724926ea6ae119956dc7b1e39c2e30c1e3657676 and re-applies commit 6e0565e9de4247bbf0ca662565c58e0a54258d6e. Outputs now need to be explicitly enabled when performing a modeset. We need to roll back wlr_output_attach_render when we decide not to render. See also: https://github.com/swaywm/wlroots/pull/1797 (wlroots PR) See also: https://github.com/swaywm/sway/pull/4355 (Original sway PR) See also: https://github.com/swaywm/sway/pull/4434 (Revert sway PR)
2019-12-27config/output: apply scale_filter even when scale has not changedRonan Pigott
2019-12-14config/input: set type for new identifier configsBrian Ashworth
When an input becomes available, the input type config for that device type will be merged underneath the input identifier config, provided they both exist. If an input type config gets added or modified at a later point, then those changes get merged onto the input identifier configs for that type. However there was a missing case of the input identifier config being added after the device is already available and the input type config existing. This makes it so that the first time an input identifier config gets stored, there will be a check to see if it matched any of the available devices. If it does, then there will be a search for the associated input type config, which will be merged underneath the input identifier config if found.
2019-12-12Auto-detect output scaleSimon Ser
If the screen DPI is high enough, auto-enable scale=2 (if the user hasn't set the scale). Uses heuristics based on [1]. [1]: https://gitlab.gnome.org/GNOME/mutter/blob/05217066171992b0bc50882869aad6385285c878/src/backends/meta-monitor.c#L1590 Closes: https://github.com/swaywm/sway/issues/1800
2019-12-12Add seat <seat> idle_{inhibit,wake} <sources...>Drew DeVault
This adds seat configuration options which can be used to configure what events affect the idle behavior of sway. An example use-case is mobile devices: you would remove touch from the list of idle_wake events. This allows the phone to stay on while you're actively using it, but doesn't wake from idle on touch events while it's sleeping in your pocket.
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-21Add support for wlr_keyboard_groupBrian Ashworth
A wlr_keyboard_group allows for multiple keyboard devices to be combined into one logical keyboard. This is useful for keyboards that are split into multiple input devices despite appearing as one physical keyboard in the user's mind. This adds support for wlr_keyboard_groups to sway. There are two keyboard groupings currently supported, which can be set on a per-seat basis. The first keyboard grouping is none, which disables all grouping and provides no functional change. The second is keymap, which groups the keyboard devices in the seat by their keymap. With this grouping, the effective layout and repeat info is also synced across keyboard devices in the seat. Device specific bindings will still be executed as normal, but everything else related to key and modifier events will be handled by the keyboard group's keyboard.
2019-11-17output: add max_render_timeIvan Molodetskikh
2019-11-17Use an enum instead of a marker string for map_to_Tadeo Kondrak
2019-11-17Implement input map_to_region commandTadeo Kondrak
2019-11-05Use wlr_output_preferred_mode instead of the last modeSimon Ser
Instead of relying on the order of modes, use wlr_output_preferred_mode to get the preferred mode.
2019-11-05Fix segfault in set_modeSimon Ser
best is NULL prior to being assigned to a mode. Closes: https://github.com/swaywm/sway/issues/4705 Fixes: f33dcd4c604f ("Prefer higher refresh rate default modes")
2019-11-05Prefer higher refresh rate default modesRonan Pigott
2019-11-04Add --custom to `output mode` commandSimon Ser
This forces to set the mode as a custom mode.
2019-11-01Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.Sheena Artrip
set_cloexec is defined by both sway and wlroots (and who-knows-else), so rename the sway one for supporting static linkage. We also remove the duplicate version of this in client/. Fixes: https://github.com/swaywm/sway/issues/4677
2019-11-01Fix potential NULL reference on cleanuplbonn
If allocation of bindings failed. Found with clang-tidy
2019-10-27Fix segfault in wlr_output_manager_v1_set_configurationSimon Ser
Calling wlr_output_manager_v1_set_configuration with an enabled output and a NULL mode is incorrect if the output doesn't support modes. When DPMS'ing an output, wlr_output_enable(output, false) is called. This de-allocates the CRTC and sets wlr_output.current_mode to NULL. Because we mark DPMS'ed outputs as enabled, we also need to provide a correct output mode. Add a field to sway_output to hold the current mode. Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27Fix apply_output_config return value when enabling outputSimon Ser
apply_output_config would call output_enable and always return true, even if the output couldn't be enabled.
2019-10-21Fix refresh rate scale of outputDanilo Spinella
When applying config, value mode->refresh is mHz; convert it to Hz before assigning it to the temporary output config. oc->refresh_rate will be converted back to mHz in set_mode function. Fix debug log printing GHz instead of Hz.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 23:47:48 +0000