aboutsummaryrefslogtreecommitdiff
path: root/sway/config/output.c
AgeCommit message (Collapse)Author
2023-04-14Use output_match_name_or_id() in apply_output_config_to_outputs()Simon Ser
2023-04-14Use all_output_by_name_or_id() in merge_id_on_name()Simon Ser
No need to iterate over the outputs manually.
2023-02-22Adjust scale for fractional-scale-v1Simon Ser
2023-01-03Replace math functions that promote float to doubleCarl Smedstad
2022-11-28Make DRM backend optionalSimon Ser
2022-08-30config/output: test adaptive syncSimon Ser
Required for [1]. [1]: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3637
2022-07-04Remove internal references to DPMSSimon Ser
While at it, use an int for the config field, just like we do for all other fields.
2022-06-10config/output: use wlr_output_commit_stateSimon Ser
This makes the code more robust because we don't potentially leave bad state in wlr_output.pending behind anymore. This also fixes a bug. Closes: https://github.com/swaywm/sway/issues/7043 References: https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3610
2022-05-26Handle NULL output make/model/serialSimon Ser
2022-01-31chore: chase wlr_output_layout_get_box() updateKirill Primak
https://gitlab.freedesktop.org/wlroots/wlroots/-/merge_requests/3439
2021-11-25sway: replace noop_output by fallback_outputSimon Zeni
wlroots removed the support for the noop backend. Instead we rely on the headless backend to provide the fallback output.
2021-11-23Add 'output render_bit_depth [8|10]' commandManuel Stoeckl
This makes it possible to hint to the renderer and backends how many bits per channel the buffers that the compositor draws windows onto should have. Renderers and backends may deviate from this if they do not support the formats with higher bit depth.
2021-10-30Bump RLIMIT_NOFILESimon Ser
Wayland compositors handle many file descriptors: client connections, DMA-BUFs, sync_files, wl_data_device pipes, and so on. Bump the limit to the max. Closes: https://github.com/swaywm/sway/issues/6285
2021-09-28Add support for DRM panel orientationSimon Ser
References: https://github.com/swaywm/wlroots/pull/3205
2021-08-31Add `output modeline` commandDavid Rosca
Only works with DRM backend.
2021-08-12Fallback to other output modes if preferred mode failsSimon Ser
Sometimes the preferred mode is not available due to hardware constraints (e.g. GPU or cable bandwidth limitations). In these cases it's better to fallback to lower modes than to end up with a black screen.
2021-02-24output: Reconfigure xcursor when applying output configTadeo Kondrak
Before this commit, when an output had its scale dynamically changed, Sway would not load a cursor theme with the new scale. This results in stale cursor images when moving the cursor into an area controlled by the compositor, like the background or resize areas. To reproduce: - Using IPC, set an output scale to a value that isn't currently used - Move the cursor into a compositor-controlled area - The cursor will not change
2021-01-15config/output: correct refresh rate rounding errorRonan Pigott
2020-07-10config/output: don't change output state before commitSimon Ser
Previously, we called output_disable prior to wlr_output_commit. This mutates Sway's output state before the output commit actually succeeds. This results in Sway's state getting out-of-sync with wlroots'. An alternative fix [1] was to revert the changes made by output_disable in case of failure. This is a little complicated. Instead, this patch makes it so Sway's internal state is never changed before a successful wlr_output commit. We had two output flags: enabled and configured. However enabled was set prior to the output becoming enabled, and was used to prevent the output event handlers (specifically, the mode handler) from calling apply_output_config again (infinite loop). Rename enabled to enabling and use it exclusively for this purpose. Rename configure to enabled, because that's what it really means. [1]: https://github.com/swaywm/sway/pull/5521 Closes: https://github.com/swaywm/sway/issues/5483
2020-06-19input: disable events for map_to_output devices when output not presentTudor Brindus
Fixes #3449.
2020-06-05Use new wlroots API for clearing keyboard/pointer focus during grabsThomas Hebb
We are not allowed to do what we did in #5222 and pass a `NULL` surface wlr_seat_pointer_notify_enter(), and it's causing crashes when an xdg-shell popup is active (see #5294 and swaywm/wlroots#2161). Instead, solve #5220 using the new wlroots API introduced in swaywm/wlroots#2217.
2020-04-26config/output: reconfigure input devices after full output initTudor Brindus
Previously in 3de1a39, it "worked by accident" in my testing since the display being used in `map_to_output` was initialized first (the map would not be applied because the display hadn't actually come online yet), and was followed by a second display (at which point the map would get applied for the first display). Refs #5231
2020-04-24config/output: reconfigure input devices on new outputTudor Brindus
Some input rules, like `map_to_output`, are dependent on a specific screen being present. This currently does not work for hotplugged outputs, or outputs that are processed after the input device is initially probed. This commit fixes both cases, by reconfiguring inputs on each output addition. Fixes #5231.
2020-04-09Don't add disabled outputs back to output layoutSimon Ser
Return early from apply_output_config if the output is disabled. This restores our previous behavior [1]. [1]: https://github.com/swaywm/sway/commit/0cdcf66bbccfeb1e3a8191cedd5f824bb27776a6#diff-4f65f4327e987fef8ec3796cdb07644eL349
2020-04-09Fix initial modesetSimon Ser
An if branch takes care of the case where the output needs to be turned off (DPMS'ed or disabled). The other branch needs to unconditionally enable the output. output->current_mode is already taken care of in apply_config. Sorry about that, probably made a bad change by mistake after my DRM testing. Closes: https://github.com/swaywm/sway/issues/5193
2020-04-08Introduce test_output_configSimon Ser
This function checks whether the backend would accept an output configuration, without applying the changes.
2020-03-07Add an adaptive_sync output commandSimon Ser
This enables/disables adaptive synchronization on the output. For now, the default is disabled because it might cause flickering on some hardware if clients don't submit frames at regular enough intervals. In the future an "auto" option will only enable adaptive sync if a fullscreen client opts-in via a Wayland protocol.
2020-02-16output: fix updating output manager configBrian Ashworth
The output manager config is created when the output is created. It is updated when the mode, transform, scale, or layout for the output changes, as well as, when the output is destroyed. Since the output->enabled property was not being set before calling apply_output_config, the output event handlers were early returning and never updating the output manager config when the output state was committed. This fixes the issue by setting output->enabled in apply_output_config below the output disabling section. There are also a few other minor changes that are required to function. Additionally, this renames output_enable to output_configure to better describe the recent changes.
2020-02-13Fix crash: use wlr_output->name instead of possibly missing oc->nameYorick van Pelt
Fixes segfault on start: https://gist.github.com/yorickvP/89eccb3782c6edb22aeda6ce9c6d4fcb
2020-02-11Apply the output scale filter after the output commitSimon Ser
The smart output filter uses the current output scale.
2020-02-11Stop calling apply_output_config from output_enableSimon Ser
The only output_enable caller is now apply_output_config. Stop calling apply_output_config from output_enable to simplify the code and avoid the back-and-forth between these two functions. output_enable is now the symmetric of output_disable: it just marks the output as enabled and performs bookkeeping (e.g. creating teh default workspace). It is called from apply_output_config after the output commit, so that it can read the current output state and act accordingly. This change also allows us to avoid an extraneous wlr_output_commit. References: https://github.com/swaywm/sway/issues/4921
2020-02-11Fix output scale auto-detectionSimon Ser
Closes: https://github.com/swaywm/sway/issues/4960
2020-01-16output: apply oc to outputs using wl_for_each_safeBrian Ashworth
If applying an output config to an output fails, the output may be destroyed. To be able to handle this situation correctly, apply_output_config_to_outputs needs to use wl_list_for_each_safe.
2019-12-31Fix sway_log using non initialised output_config pointerPaul Riou
This fixes a crash where the `oc->name` would be accessed by sway_log() even when `oc` was NULL.
2019-12-30Re-add support for wlr_output's atomic APISimon Ser
This reverts commit 724926ea6ae119956dc7b1e39c2e30c1e3657676 and re-applies commit 6e0565e9de4247bbf0ca662565c58e0a54258d6e. Outputs now need to be explicitly enabled when performing a modeset. We need to roll back wlr_output_attach_render when we decide not to render. See also: https://github.com/swaywm/wlroots/pull/1797 (wlroots PR) See also: https://github.com/swaywm/sway/pull/4355 (Original sway PR) See also: https://github.com/swaywm/sway/pull/4434 (Revert sway PR)
2019-12-27config/output: apply scale_filter even when scale has not changedRonan Pigott
2019-12-12Auto-detect output scaleSimon Ser
If the screen DPI is high enough, auto-enable scale=2 (if the user hasn't set the scale). Uses heuristics based on [1]. [1]: https://gitlab.gnome.org/GNOME/mutter/blob/05217066171992b0bc50882869aad6385285c878/src/backends/meta-monitor.c#L1590 Closes: https://github.com/swaywm/sway/issues/1800
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-17output: add max_render_timeIvan Molodetskikh
2019-11-05Use wlr_output_preferred_mode instead of the last modeSimon Ser
Instead of relying on the order of modes, use wlr_output_preferred_mode to get the preferred mode.
2019-11-05Fix segfault in set_modeSimon Ser
best is NULL prior to being assigned to a mode. Closes: https://github.com/swaywm/sway/issues/4705 Fixes: f33dcd4c604f ("Prefer higher refresh rate default modes")
2019-11-05Prefer higher refresh rate default modesRonan Pigott
2019-11-04Add --custom to `output mode` commandSimon Ser
This forces to set the mode as a custom mode.
2019-11-01Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.Sheena Artrip
set_cloexec is defined by both sway and wlroots (and who-knows-else), so rename the sway one for supporting static linkage. We also remove the duplicate version of this in client/. Fixes: https://github.com/swaywm/sway/issues/4677
2019-10-27Fix segfault in wlr_output_manager_v1_set_configurationSimon Ser
Calling wlr_output_manager_v1_set_configuration with an enabled output and a NULL mode is incorrect if the output doesn't support modes. When DPMS'ing an output, wlr_output_enable(output, false) is called. This de-allocates the CRTC and sets wlr_output.current_mode to NULL. Because we mark DPMS'ed outputs as enabled, we also need to provide a correct output mode. Add a field to sway_output to hold the current mode. Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27Fix apply_output_config return value when enabling outputSimon Ser
apply_output_config would call output_enable and always return true, even if the output couldn't be enabled.
2019-10-21Fix refresh rate scale of outputDanilo Spinella
When applying config, value mode->refresh is mHz; convert it to Hz before assigning it to the temporary output config. oc->refresh_rate will be converted back to mHz in set_mode function. Fix debug log printing GHz instead of Hz.
2019-08-07Revert "Add support for wlr_output's atomic API"Rouven Czerwinski
This reverts commit 6e0565e9de4247bbf0ca662565c58e0a54258d6e. This is required for the revert on swaywm/wlroots#1781
2019-08-07config/output: rebase cursors after config appliedBrian Ashworth
When applying an output config, an output may transform or be altered in some way that effects the cursor. In order for the cursor images to be updated properly, all cursors need to be rebased after applying output configs.
2019-08-02Allocator sizeof operand mismatchAntonin Décimo
Result of 'calloc' is converted to a pointer of type 'char *', which is incompatible with sizeof operand type 'char **'
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 10:28:18 +0000