aboutsummaryrefslogtreecommitdiff
path: root/sway/config/output.c
AgeCommit message (Collapse)Author
2020-04-08Introduce test_output_configSimon Ser
This function checks whether the backend would accept an output configuration, without applying the changes.
2020-03-07Add an adaptive_sync output commandSimon Ser
This enables/disables adaptive synchronization on the output. For now, the default is disabled because it might cause flickering on some hardware if clients don't submit frames at regular enough intervals. In the future an "auto" option will only enable adaptive sync if a fullscreen client opts-in via a Wayland protocol.
2020-02-16output: fix updating output manager configBrian Ashworth
The output manager config is created when the output is created. It is updated when the mode, transform, scale, or layout for the output changes, as well as, when the output is destroyed. Since the output->enabled property was not being set before calling apply_output_config, the output event handlers were early returning and never updating the output manager config when the output state was committed. This fixes the issue by setting output->enabled in apply_output_config below the output disabling section. There are also a few other minor changes that are required to function. Additionally, this renames output_enable to output_configure to better describe the recent changes.
2020-02-13Fix crash: use wlr_output->name instead of possibly missing oc->nameYorick van Pelt
Fixes segfault on start: https://gist.github.com/yorickvP/89eccb3782c6edb22aeda6ce9c6d4fcb
2020-02-11Apply the output scale filter after the output commitSimon Ser
The smart output filter uses the current output scale.
2020-02-11Stop calling apply_output_config from output_enableSimon Ser
The only output_enable caller is now apply_output_config. Stop calling apply_output_config from output_enable to simplify the code and avoid the back-and-forth between these two functions. output_enable is now the symmetric of output_disable: it just marks the output as enabled and performs bookkeeping (e.g. creating teh default workspace). It is called from apply_output_config after the output commit, so that it can read the current output state and act accordingly. This change also allows us to avoid an extraneous wlr_output_commit. References: https://github.com/swaywm/sway/issues/4921
2020-02-11Fix output scale auto-detectionSimon Ser
Closes: https://github.com/swaywm/sway/issues/4960
2020-01-16output: apply oc to outputs using wl_for_each_safeBrian Ashworth
If applying an output config to an output fails, the output may be destroyed. To be able to handle this situation correctly, apply_output_config_to_outputs needs to use wl_list_for_each_safe.
2019-12-31Fix sway_log using non initialised output_config pointerPaul Riou
This fixes a crash where the `oc->name` would be accessed by sway_log() even when `oc` was NULL.
2019-12-30Re-add support for wlr_output's atomic APISimon Ser
This reverts commit 724926ea6ae119956dc7b1e39c2e30c1e3657676 and re-applies commit 6e0565e9de4247bbf0ca662565c58e0a54258d6e. Outputs now need to be explicitly enabled when performing a modeset. We need to roll back wlr_output_attach_render when we decide not to render. See also: https://github.com/swaywm/wlroots/pull/1797 (wlroots PR) See also: https://github.com/swaywm/sway/pull/4355 (Original sway PR) See also: https://github.com/swaywm/sway/pull/4434 (Revert sway PR)
2019-12-27config/output: apply scale_filter even when scale has not changedRonan Pigott
2019-12-12Auto-detect output scaleSimon Ser
If the screen DPI is high enough, auto-enable scale=2 (if the user hasn't set the scale). Uses heuristics based on [1]. [1]: https://gitlab.gnome.org/GNOME/mutter/blob/05217066171992b0bc50882869aad6385285c878/src/backends/meta-monitor.c#L1590 Closes: https://github.com/swaywm/sway/issues/1800
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-17output: add max_render_timeIvan Molodetskikh
2019-11-05Use wlr_output_preferred_mode instead of the last modeSimon Ser
Instead of relying on the order of modes, use wlr_output_preferred_mode to get the preferred mode.
2019-11-05Fix segfault in set_modeSimon Ser
best is NULL prior to being assigned to a mode. Closes: https://github.com/swaywm/sway/issues/4705 Fixes: f33dcd4c604f ("Prefer higher refresh rate default modes")
2019-11-05Prefer higher refresh rate default modesRonan Pigott
2019-11-04Add --custom to `output mode` commandSimon Ser
This forces to set the mode as a custom mode.
2019-11-01Rename symbol set_cloexec to sway_set_cloexec, remove duplicates.Sheena Artrip
set_cloexec is defined by both sway and wlroots (and who-knows-else), so rename the sway one for supporting static linkage. We also remove the duplicate version of this in client/. Fixes: https://github.com/swaywm/sway/issues/4677
2019-10-27Fix segfault in wlr_output_manager_v1_set_configurationSimon Ser
Calling wlr_output_manager_v1_set_configuration with an enabled output and a NULL mode is incorrect if the output doesn't support modes. When DPMS'ing an output, wlr_output_enable(output, false) is called. This de-allocates the CRTC and sets wlr_output.current_mode to NULL. Because we mark DPMS'ed outputs as enabled, we also need to provide a correct output mode. Add a field to sway_output to hold the current mode. Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27Fix apply_output_config return value when enabling outputSimon Ser
apply_output_config would call output_enable and always return true, even if the output couldn't be enabled.
2019-10-21Fix refresh rate scale of outputDanilo Spinella
When applying config, value mode->refresh is mHz; convert it to Hz before assigning it to the temporary output config. oc->refresh_rate will be converted back to mHz in set_mode function. Fix debug log printing GHz instead of Hz.
2019-08-07Revert "Add support for wlr_output's atomic API"Rouven Czerwinski
This reverts commit 6e0565e9de4247bbf0ca662565c58e0a54258d6e. This is required for the revert on swaywm/wlroots#1781
2019-08-07config/output: rebase cursors after config appliedBrian Ashworth
When applying an output config, an output may transform or be altered in some way that effects the cursor. In order for the cursor images to be updated properly, all cursors need to be rebased after applying output configs.
2019-08-02Allocator sizeof operand mismatchAntonin Décimo
Result of 'calloc' is converted to a pointer of type 'char *', which is incompatible with sizeof operand type 'char **'
2019-08-02Add support for wlr_output's atomic APISimon Ser
See https://github.com/swaywm/wlroots/pull/1762
2019-07-10config/output: correctly set width/height in applyBrian Ashworth
In apply_output_config, this sets output->{width,height} using the values in the output box. Previously, they were being set using wlr_output_transformed_resolution, which takes the width and height from the wlr_output and just checks whether they should be swapped based on the transform. This did not take into account the output's scale. wlr_output_effective_resolution could be used instead, which handles both transform and scale. However, the values in the output box have already been processed by wlr_output_effective_resolution so they can just be used directly
2019-05-09config/output: fix typo in merge_id_on_nameBrian Ashworth
This fixes a typo in `merge_id_on_name` for output configs that resulted in incorrect id-on-name output configs being generated. Instead of using the output that matched the name or identifier, the first output in the list was being used instead. This could cause merging across unrelated output configs and preventing output configs from being applied correctly
2019-05-04Destroy swaybg client on reloadBrian Ashworth
When reloading, this destroys the old config's swaybg client before spawning the new config's swaybg. This fixes a race condition where the old config's swaybg client's destroy was being called after the new config's swaybg client was being spawned. This was causing the reference to the new swaybg client to be removed and never destroyed. This also modifies handle_swaybg_client_destroy to grab the config reference using wl_container_of on the listener since the swaybg client may be the old config swaybg client and should be used instead of the global config instance
2019-04-14Spawn swaynag as a wayland clientBrian Ashworth
This spawns swaynag as a wayland client similar to how swaybar and swaybg are already done
2019-04-08config/output: unbreak on 32-bit architecturesJan Beich
sway/config/output.c:624:54: error: format specifies type 'long' but the argument has type 'size_t' (aka 'unsigned int') [-Werror,-Wformat] sway_log(SWAY_DEBUG, "spawn_swaybg cmd[%ld] = %s", k, cmd[k]); ~~~ ^ %zu include/log.h:40:74: note: expanded from macro 'sway_log' _sway_log(verb, "[%s:%d] " fmt, _sway_strip_path(__FILE__), __LINE__, ##__VA_ARGS__) ^~~~~~~~~~~
2019-04-04swaybg: one instance for all outputsBrian Ashworth
This makes it so there will only be one swaybg instance running instead of one per output. swaybg's cli has been changed to a xrandr like interface, where you select an output and then change properties for that output and then select another output and repeat. This also makes it so swaybg is only killed and respawned when a background changes or when reloading.
2019-03-24Add support for manually setting subpixel hinting on outputs.Geoff Greer
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this. Addresses https://github.com/swaywm/sway/issues/3163
2019-03-17config/output: handle wildcard in get_output_configBrian Ashworth
In #3916, I overlooked that `get_output_config` does not handle wildcards unless the config is reloading, which is a remnant of older iterations of the output config handling that went unnoticed due to `output_find_config` handling it. With the current version of the output config handling, having `get_output_config` handle wildcard configs is actually preferable. This fixes having only a wildcard output config in the config file or when connecting/enabling a new output with only a wildcard config existing.
2019-03-16config/output: revamp identifier/name layeringBrian Ashworth
This revamps the way that output configs are handled when referencing an output by both identifier and name. If an output is always referred to by name or by identifier, this should have no noticeable change. As soon as there is a name output config and an identifier output config that matches an output, an output config is generated that is named `<identifier> on <name>` that is generated with the identifier output config merged on top of the name output config and stored. When a change to either is stored, the delta is merged on top of that "id on name" output config, as well. If the "id on name" output config exists, it has the highest precedence and will be used when applying a config to the output. This fixes the following case: - `swaymsg output <name> bg /path/to/wallpaper1 fill` - `swaymsg output <identifier> bg /path/to/wallpaper2 fill` - `swaymsg output <name> dpms on` Without this, the wallpaper is changed to `/path/to/wallpaper1`. With this, the wallpaper remains `/path/to/wallpaper2`.
2019-03-16Fix output config retrieval for new outputsBrian Ashworth
This removes `output_find_config`, which would take the first matching output config it found. This is fine if only a name output config, identifier output config, or even just wildcard exist, but if there is a name output config and identifier output config, they are not merged. Instead, this introduces find_output_config, which is just a wrapper for `get_output_config`. This ensures that both the name and identifier output configs are respected. This fixes the following case: - For simplicity in this example, remove all output configs from config - Run `swaymsg output <name> bg #ff0000 solid_color` - Run `swaymsg output <identifier> scale 2` - Disconnect and reconnect output Without this, the output will have the background, but not the scale. With this, the output will have both the background and scale
2019-03-11Stop using wlr_output->{lx,ly}emersion
Also fixes sway_output->{lx,ly,width,height} not being updated. Also fixes output_get_in_direction adding buffer coords to layout coords.
2019-03-03Fixes crash in spawn_swaybg (closes #3733)Noam Preil
2019-02-27config: remove double assignement to result in get_output_configRouven Czerwinski
2019-02-19Don't use SOCK_CLOEXECemersion
Manually set the CLOEXEC flag instead, since SOCK_CLOEXEC isn't POSIX.
2019-02-16Disconnect swaybg instead of killing itemersion
This is much more reliable. This also fixes race conditions when killing swaybg while it's doing a wl_display_roundtrip.
2019-02-16Fix reload freeze when not modsetting current modeBrian Ashworth
This fixes the issue of the display freezing on reload with wlroots#1545. On master, all output configs are applied on reload. This may cause an output to have its config applied up to three times, instead of just once. The three cases are: output name, output identifier, and wildcard. Not only is this inefficient, but it can cause swaybg to be spawned and immediately killed. However, swaybg requires two roundtrips of wl_display (to obtain needed globals) before it enters its normal event loop. Modesetting will roundtrip the wl_display. Without modesetting, waitpid for killing swaybg could block infinitely due to swaybg being blocked by wl_display_roundtrip. This only configured an output once. It either uses the wildcard config or creates an empty wildcard config and applies that. This also fixes a bug where an output would not be reset when there is no output config to apply to it.
2019-02-15apply_output_config: dpms on before modesetBrian Ashworth
On the DRM backend, if an output is dpms'd off and a different output is hotplugged, the CRTC for the output is reclaimed. When modesetting an output without a CRTC, a CRTC will not be given to an output that is not desired to be enabled. This splits setting the dpms state in apply_output_config. If the output should be dpms on, the it is enabled before attempting to modeset. Otherwise, it is dpms'd off after setting everything else. This also adds DPMS_ON to the default output configs.
2019-02-01Revert "Add some missing frees."Connor E
This reverts commit b5d95f264d5b08f6228e05be680ee36fc06ca6d6.
2019-01-22Don't allow noop output to be configuredRyan Dwyer
2019-01-21Replace wlr_log with sway_logM Stoeckl
This commit mostly duplicates the wlr_log functions, although with a sway_* prefix. (This is very similar to PR #2009.) However, the logging function no longer needs to be replaceable, so sway_log_init's second argument is used to set the exit callback for sway_abort. wlr_log_init is still invoked in sway/main.c This commit makes it easier to remove the wlroots dependency for the helper programs swaymsg, swaybg, swaybar, and swaynag.
2019-01-19apply_output_config: remove output_iBrian Ashworth
output_i was used in apply_output_config when swaybar used wl_output index numbers instead of xdg-output names. This is no longer needed.
2019-01-18Better handle outputs without CRTCemersion
This happens if you plug in more outputs than supported by your GPU. This patch makes it so outputs without CRTCs appear as disabled. As soon as they get a CRTC (signalled via the mode event), we can enable them.
2019-01-17Don't use sh when spawning swaybgemersion
2019-01-17swaybg: use output names instead of output indexesemersion
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 20:32:12 +0000