aboutsummaryrefslogtreecommitdiff
path: root/include/sway
AgeCommit message (Collapse)Author
2020-03-11commands: Add shortcuts_inhibitor commandMichael Weiser
Add a command to influence keyboard shortcuts inhibitors. In its current form it can be used to activate, deactivate or toggle an existing inhibitor on the surface currently receiving input. This can be used to define an escape shortcut such as: bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate It also allows the user to configure a per-seat default of whether keyboard inhibitors are honoured by default (the default) or not. Using the activate/toggle command they can then enable the lingering inhibitor at a later time of their choosing. As a side effect this allows to specifically address a named seat for actions as well, whatever use-case that might serve. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11input: Add support for keyboard shortcuts inhibitMichael Weiser
Adding support for the keyboard shortcuts inhibit protocol allows remote desktop and virtualisation software to receive all keyboard input in order to pass it through to their clients so users can fully interact the their remote/virtual session. The software usually provides its own key combination to release its "grab" to all keyboard input. The inhibitor can be deactivated by the user by removing focus from the surface using another input device such as the pointer. Use support for the procotol in wlroots to add support to sway. Extend the input manager with handlers for inhibitor creation and destruction and appropriate bookkeeping. Attach the inhibitors to the seats they apply to to avoid having to search the list of all currently existing inhibitors on every keystroke and passing the inhibitor manager around. Add a helper function to retrieve the inhibitor applying to the currently focused surface of a seat, if one exists. Extend bindsym with a flag for bindings that should be processed even if an inhibitor is active. Conversely this disables all normal shortcuts if an inhibitor is found for the currently focused surface in keyboard::handle_key_event() since they don't have that flag set. Use above helper function to determine if an inhibitor exists for the surface that would eventually receive input. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11config: Fix typo in reload bindsym flag bitmaskMichael Weiser
Fix a typo in the bit mask value of the BINDING_RELOAD flag introduced in commit 152e30c37 so it can work as intended. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-07Add an adaptive_sync output commandSimon Ser
This enables/disables adaptive synchronization on the output. For now, the default is disabled because it might cause flickering on some hardware if clients don't submit frames at regular enough intervals. In the future an "auto" option will only enable adaptive sync if a fullscreen client opts-in via a Wayland protocol.
2020-03-06Use wlr_client_bufferSimon Ser
Update for breaking changes in [1]. [1]: https://github.com/swaywm/wlroots/pull/2043
2020-03-06Drop sway_output.surface_needs_frameSimon Ser
wlr_output_schedule_frame now sets output->needs_frame [1], so this isn't needed anymore. [1]: https://github.com/swaywm/wlroots/pull/2053
2020-03-04Make handle_destroy and output_repaint_timer_handler staticSimon Ser
2020-02-27Introduce pid criteria tokenRyan Dwyer
This can be used as a workaround to flag terminal windows as urgent when commands are completed, until urgency is introduced in the Wayland protocol. Configure your shell to run `swaymsg "[pid=$PPID] urgent enable"` when commands are completed, and use a terminal which uses one process per window.
2020-02-26Add support for wlr-output-power-management-unstable-v1Simon Ser
2020-02-18treewide: fix typosTorstein Husebø
2020-02-16output: fix updating output manager configBrian Ashworth
The output manager config is created when the output is created. It is updated when the mode, transform, scale, or layout for the output changes, as well as, when the output is destroyed. Since the output->enabled property was not being set before calling apply_output_config, the output event handlers were early returning and never updating the output manager config when the output state was committed. This fixes the issue by setting output->enabled in apply_output_config below the output disabling section. There are also a few other minor changes that are required to function. Additionally, this renames output_enable to output_configure to better describe the recent changes.
2020-02-11Stop calling apply_output_config from output_enableSimon Ser
The only output_enable caller is now apply_output_config. Stop calling apply_output_config from output_enable to simplify the code and avoid the back-and-forth between these two functions. output_enable is now the symmetric of output_disable: it just marks the output as enabled and performs bookkeeping (e.g. creating teh default workspace). It is called from apply_output_config after the output commit, so that it can read the current output state and act accordingly. This change also allows us to avoid an extraneous wlr_output_commit. References: https://github.com/swaywm/sway/issues/4921
2020-02-04criteria: match containers without viewAnders
Closes #4929 Replaces criteria_get_views with criteria_get_containers which can return containers without views when the criteria only contains container properties.
2020-01-24Fix compiling with -fno-commonthermitegod
2020-01-16Fix crash when showing scratchpad hidden split containersRonan Pigott
2020-01-15Revert "Make all the container dimensions integers"Simon Ser
This reverts commit 79c5f5ba1245a8c3d575770419a6501447e78919. Fixes: https://github.com/swaywm/sway/issues/4908
2020-01-09view: remove workspace pid mapping for assignsBrian Ashworth
If a view is mapped to a workspace using an assign, the pid should still be removed from the pid mapping list. This prevents child processes from matching against it and mapping a view to a likely undesired workspace.
2020-01-05input/cursor: handle image surface destroyBrian Ashworth
This adds a listener for the destroy event of the cursor image surface. This prevents a use-after-free when the last visible image surface is freed, there has not been a new cursor set, and the cursor is reshown.
2020-01-01Make all the container dimensions integersPedro Côrte-Real
Containers are always fixed to the pixel grid so position and size them with integers instead of doubles. Functionally this should be no different since rounding down is already being done on things like layout. But it makes it clear what the intention is and avoids bugs where fractional pixels are used. The translating and moving code is still using doubles because the cursors can have fractional pixels and thus the code is plumbed that way. But that could also probably be changed easily by doing the integer conversions earlier and plumbing with int.
2020-01-01Avoid numerical instability in resizePedro Côrte-Real
Because the layout code rounds down the dimensions of the windows resizing would often be off by one pixel. The width/height fraction would not exactly reflect the final computed width and so the resize code would end up calculating things wrong. To fix this first snap the container size fractions to the pixel grid and only then do the resize. Also use round() instead of floor() during layout to avoid a slightly too small width. This applies in two cases: 1. For the container we are actually resizing using floor() might result in being 1px too small. 2. For the other containers it might result in resizing them down by 1px and then if the container being resized is the last all those extra pixels would make the resize too large. Fixes #4391
2019-12-31Add virtual pointer protocolJosef Gajdusek
2019-12-28bar_cmd_colors: remove add_colorBrian Ashworth
This is the third commit in a series of commits to refactor color handling in sway. This removes add_color from commands.c. It was only being used by bar_cmd_colors. This also changes the functions to use parse_color which is used to validate rgb(a) colors throughout the code base and is also what i3bar is using to parse the colors after they are passed over ipc. After parsing the color and ensuring it is valid, the rgba hex string is then generated using snprintf. This refactor also ensures that all the colors for the command are valid before applying any of them.
2019-12-16seat_cmd_keyboard_grouping: change keymap to smartBrian Ashworth
This removes `seat <seat> keyboard_grouping keymap` and replaces it with `seat <seat> keyboard_grouping smart`. The smart keyboard grouping will group based on both the keymap and repeat info. The reasoning for this is that deciding what the repeat info should be for a group is either arbitrary or non-deterministic when multiple keyboards in the group have repeat info configured (unless somehow exposed to the user in a reproducible uniquely identifiable fashion).
2019-12-12Add seat <seat> idle_{inhibit,wake} <sources...>Drew DeVault
This adds seat configuration options which can be used to configure what events affect the idle behavior of sway. An example use-case is mobile devices: you would remove touch from the list of idle_wake events. This allows the phone to stay on while you're actively using it, but doesn't wake from idle on touch events while it's sleeping in your pocket.
2019-12-07input/cursor: pass gesture events to clientsBenjamin Cheng
Some wayland clients (mostly GTK3 apps) like eog or evince support gestures like pinch-to-zoom. These gestures are given to clients via the pointer_gestures_v1 protocol. This is already supported in wlroots, so we just need to hook up the events here in sway. Fixes #4724
2019-12-01output: Schedule idle frames if we do not renderKenny Levinsen
Repaint scheduling delays output render and frame done events from output frame events, and block idle frame events from being scheduled in between output frame done and output render in this period of time. If a surface is committed after its frame done event, but before output render, idle frame requests will be blocked, and the surface relies on the upcoming render to schedule a frame. If when the repaint timer expires, output render is deemed unnecessary, no frame will be scheduled. This can lead to surfaces never having their frame callbacks fire. To fix this, we store that a surface has requested a frame in surface_needs_frame. When the repaint expires, if no render is deemed necessary, we check this flag and schedule an idle frame. Fixes #4768
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-21Add support for wlr_keyboard_groupBrian Ashworth
A wlr_keyboard_group allows for multiple keyboard devices to be combined into one logical keyboard. This is useful for keyboards that are split into multiple input devices despite appearing as one physical keyboard in the user's mind. This adds support for wlr_keyboard_groups to sway. There are two keyboard groupings currently supported, which can be set on a per-seat basis. The first keyboard grouping is none, which disables all grouping and provides no functional change. The second is keymap, which groups the keyboard devices in the seat by their keymap. With this grouping, the effective layout and repeat info is also synced across keyboard devices in the seat. Device specific bindings will still be executed as normal, but everything else related to key and modifier events will be handled by the keyboard group's keyboard.
2019-11-17view: add max_render_timeIvan Molodetskikh
2019-11-17Add sway_surfaceIvan Molodetskikh
For extending wlr_surface with additional things.
2019-11-17output: add max_render_timeIvan Molodetskikh
2019-11-17Use an enum instead of a marker string for map_to_Tadeo Kondrak
2019-11-17Implement input map_to_region commandTadeo Kondrak
2019-11-04smart_borders: separate smartness from edge typesRonan Pigott
2019-11-04Add --custom to `output mode` commandSimon Ser
This forces to set the mode as a custom mode.
2019-10-27Handle layer changes for layer shell surfacesSimon Ser
Closes: https://github.com/swaywm/sway/issues/4644 References: https://github.com/emersion/rootston/commit/1982106c9b0fbd48ee9fe20e013524125f6ca3cf
2019-10-27criteria: make literal comparison for __focused__ valuesRonan Pigott
2019-10-27Fix segfault in wlr_output_manager_v1_set_configurationSimon Ser
Calling wlr_output_manager_v1_set_configuration with an enabled output and a NULL mode is incorrect if the output doesn't support modes. When DPMS'ing an output, wlr_output_enable(output, false) is called. This de-allocates the CRTC and sets wlr_output.current_mode to NULL. Because we mark DPMS'ed outputs as enabled, we also need to provide a correct output mode. Add a field to sway_output to hold the current mode. Closes: https://github.com/swaywm/wlroots/issues/1867
2019-10-27Fix apply_output_config return value when enabling outputSimon Ser
apply_output_config would call output_enable and always return true, even if the output couldn't be enabled.
2019-10-17focus: support focus_wrapping workspacelbonn
Following i3 support: https://github.com/i3/i3/pull/3407
2019-09-25input: Add support for tablet protocol.John Chadwick
Sway has basic support for drawing tablets, but does not expose properties such as pressure sensitivity. This implements the wlr tablet v2 protocol, providing tablet events to Wayland clients.
2019-09-07remove unused layer shell surface variableAleksis
2019-09-02Fix typo for the force/immediate option in xwayland_mode enumBen Brown
2019-08-20cmd_xwayland: add force for immediate launchBrian Ashworth
This just adds a force option to cmd_xwayland that allows for xwayland to be immediately launched instead of lazily launched. This is useful for slower machines so it can be part of the startup time instead of when the user is actively trying to use it
2019-08-20input/keyboard: send released only if pressed sentBrian Ashworth
This keeps track of whether surfaces received a key press event and will only send a key release event if the pressed event was sent. This also requires changing the keycodes that are sent via wl_keyboard_enter to only include those that were previously sent. This makes it so surfaces do not receive key release events for keys that they never received a key press for and makes it so switching focus doesn't leak keycodes that were consumed by bindings.
2019-08-20Remove xdg-shell v6 supportSimon Ser
All major toolkits and apps have gained xdg-shell stable support. Closes: https://github.com/swaywm/sway/issues/3690
2019-08-14layer-shell: add support for popupsDrew DeVault
2019-08-01bindsym/code: add group supportBrian Ashworth
This adds support for specifying a binding for a specific group. Any binding without a group listed will be available in all groups. The priority for matching bindings is as follows: input device, group, and locked state. For full compatibility with i3, this also adds Mode_switch as an alias for Group2. Since i3 only supports this for backwards compatibility with older versions of i3, it is implemented here, but not documented.
2019-07-27Remove all wayland-server.h includesSimon Ser
The documentation for wayland-server.h says: > Use of this header file is discouraged. Prefer including > wayland-server-core.h instead, which does not include the server protocol > header and as such only defines the library PI, excluding the deprecated API > below. Replacing wayland-server.h with wayland-server-core.h allows us to drop the WL_HIDE_DEPRECATED declaration. This commit si similar to wlroots' ca45f4490ccc ("Remove all wayland-server.h includes").
2019-07-27Avoid adding duplicate criteria for no_focus and commandAshkan Kiani
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-30 23:19:32 +0000