aboutsummaryrefslogtreecommitdiff
path: root/include/sway/commands.h
AgeCommit message (Collapse)Author
2023-01-03Make cmd_handler.command constCarl Smedstad
2023-01-03Remove duplicate declarationsCarl Smedstad
2022-12-09Add libinput RotationAngleLucas Zampieri
This patch adds the libinput option RotationAngle to sway. Signoff-by: Lucas Zampieri <lzampier@redhat.com>
2022-12-05Add `primary_selection` config optionAidan Dang
See: https://github.com/swaywm/sway/issues/4511 Adds a bool config option `primary_selection`, which explicitly enables/disables the primary selection clipboard. Defaults to enabled. This is implemented as a launch-only option which enables or disables the creation of the `zwp_primary_selection_device_manager_v1` global. Co-authored-by: Tilde Rose <t1lde@protonmail.com>
2022-10-30Support libinput's 1.21 new dwtp optionpudiva chip líquida
Support the new dwtp (disable while trackpointing) option introduced in libinput 1.21, allowing users to control whether the trackpoint (like those in Thinkpads, but not only) should be disabled while using the keyboard/touchpad. See: https://gitlab.freedesktop.org/libinput/libinput/-/issues/731
2022-10-07sway/commands/output: Add command for unplugging non-physical outputsAndri Yngvason
2022-06-23Rename dpms output command to powerSimon Ser
The "dpms" command refers to VESA Display Power Management Signaling, a deprecated standard. It's superseded by VESA DPM. Instead of tying out command name to a particular standard, use the neutral term "power".
2022-05-30sway: add bindgesture commandFlorian Franzen
Co-authored-by: Michael Weiser <michael.weiser@gmx.de>
2021-12-10Add focused_tab_titleVsevolod
2021-11-23Add 'output render_bit_depth [8|10]' commandManuel Stoeckl
This makes it possible to hint to the renderer and backends how many bits per channel the buffers that the compositor draws windows onto should have. Renderers and backends may deviate from this if they do not support the formats with higher bit depth.
2021-08-31Add `output modeline` commandDavid Rosca
Only works with DRM backend.
2021-02-04Declare all struct cmd_handler arrays constManuel Stoeckl
And make the functions handling these arrays use const types.
2020-10-12input/tablet: add tool_mode option to set tablet tools as relative inputTudor Brindus
Closes #4139.
2020-10-11Add support for workspace_min_width bar option.Tarmack
2020-08-24exec: fix validation during config reloadKonstantin Pospelov
Split cmd_exec_always into separate methods for general validation and process creation. This fixes a potential call of join_args with 0 arguments.
2020-05-13commands: Add per-view shortcuts_inhibitor commandMichael Weiser
Add a separate per-view shortcuts_inhibitor command that can be used with criteria to override the per-seat defaults. This allows to e.g. disable shortcuts inhibiting globally but enable it for specific, known-good virtualization and remote desktop software or, alternatively, to blacklist that one slightly broken piece of software that just doesn't seem to get it right but insists on trying. Add a flag to sway_view and handling logic in the input manager that respects that flag if configured but falls back to per-seat config otherwise. Add the actual command but with just enable and disable subcommands since there's no value in duplicating the per-seat activate/deactivate/toggle logic here. Split the inhibitor retrieval helper in two so we can use the backend half in the command to retrieve inhibitors for a specific surface and not just the currently focused one. Extend the manual page with documentation of the command and references to its per-seat sibling and usefulness with criteria. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-11commands: Add shortcuts_inhibitor commandMichael Weiser
Add a command to influence keyboard shortcuts inhibitors. In its current form it can be used to activate, deactivate or toggle an existing inhibitor on the surface currently receiving input. This can be used to define an escape shortcut such as: bindsym --inhibited $mod+Escape seat - shortcuts_inhibitor deactivate It also allows the user to configure a per-seat default of whether keyboard inhibitors are honoured by default (the default) or not. Using the activate/toggle command they can then enable the lingering inhibitor at a later time of their choosing. As a side effect this allows to specifically address a named seat for actions as well, whatever use-case that might serve. Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
2020-03-07Add an adaptive_sync output commandSimon Ser
This enables/disables adaptive synchronization on the output. For now, the default is disabled because it might cause flickering on some hardware if clients don't submit frames at regular enough intervals. In the future an "auto" option will only enable adaptive sync if a fullscreen client opts-in via a Wayland protocol.
2019-12-28bar_cmd_colors: remove add_colorBrian Ashworth
This is the third commit in a series of commits to refactor color handling in sway. This removes add_color from commands.c. It was only being used by bar_cmd_colors. This also changes the functions to use parse_color which is used to validate rgb(a) colors throughout the code base and is also what i3bar is using to parse the colors after they are passed over ipc. After parsing the color and ensuring it is valid, the rgba hex string is then generated using snprintf. This refactor also ensures that all the colors for the command are valid before applying any of them.
2019-12-12Add seat <seat> idle_{inhibit,wake} <sources...>Drew DeVault
This adds seat configuration options which can be used to configure what events affect the idle behavior of sway. An example use-case is mobile devices: you would remove touch from the list of idle_wake events. This allows the phone to stay on while you're actively using it, but doesn't wake from idle on touch events while it's sleeping in your pocket.
2019-11-29add scale_filter output config optionRonan Pigott
2019-11-21Add support for wlr_keyboard_groupBrian Ashworth
A wlr_keyboard_group allows for multiple keyboard devices to be combined into one logical keyboard. This is useful for keyboards that are split into multiple input devices despite appearing as one physical keyboard in the user's mind. This adds support for wlr_keyboard_groups to sway. There are two keyboard groupings currently supported, which can be set on a per-seat basis. The first keyboard grouping is none, which disables all grouping and provides no functional change. The second is keymap, which groups the keyboard devices in the seat by their keymap. With this grouping, the effective layout and repeat info is also synced across keyboard devices in the seat. Device specific bindings will still be executed as normal, but everything else related to key and modifier events will be handled by the keyboard group's keyboard.
2019-11-17view: add max_render_timeIvan Molodetskikh
2019-11-17output: add max_render_timeIvan Molodetskikh
2019-11-17Implement input map_to_region commandTadeo Kondrak
2019-07-17Implement input_cmd_xkb_file (#3999)Ed Younis
Adds a new commend "xkb_file", which constructs the internal xkb_keymap from a xkb file rather than an RMLVO configuration. This allows greater flexibility when specifying xkb configurations. An xkb file can be dumped with the xkbcomp program.
2019-07-05Add calibration_matrix config optionSergei Dolgov
Can be used to change the orientation of a touchscreen. Example usage with swaymsg: # identity swaymsg input type:touch calibration_matrix '"1 0 0 0 1 0"' # 90 degree clockwise swaymsg input type:touch calibration_matrix '"0 -1 1 1 0 0"' # 180 degree clockwise swaymsg input type:touch calibration_matrix '"-1 0 1 0 -1 1"' # 270 degree clockwise swaymsg input type:touch calibration_matrix '"0 1 0 -1 0 1"' Documentation: https://wayland.freedesktop.org/libinput/doc/latest/absolute-axes.html#calibration-of-absolute-devices
2019-06-20config: fix find_handler logicBrian Ashworth
Without this change, the handlers listed in the config_handlers or command_handlers arrays (depending on reading or active) in commands.c would be valid subcommands. To make matters worse, they would also take precedence over the defined subcommand handlers. This corrects find_handler to only work on the handler array given instead of implicitly trying others.
2019-06-09Add a new xkb_switch_layout commandSimon Ser
This allows users to programatically change the active layout.
2019-06-05add seat sub command 'xcursor_theme'Daniel Eklöf
New 'seat <name> xcursor_theme <theme> [<size>]' command that configures the default xcursor theme. The default seat's xcursor theme is also propagated to XWayland, and exported through the XCURSOR_THEME and XCURSOR_SIZE environment variables. This is done every time the default seat's configuration is changed.
2019-05-14Implement output toggleMoelf
discussed in #4136, this can't handle wildcard but won't crash.
2019-04-17Add unbindsym/unbindcode command for swaybarAlex Maese
2019-04-17Add unbindswitch commandAlex Maese
2019-04-17Create unbindsym and unbindcode commandsAlex Maese
2019-04-14Add deprecation warnings for new_float, new_window, and force_focus_wrapping.Connor E
2019-03-24Implement inhibit_idle commandBrian Ashworth
This implements the following command to set/unset a user idle inhibitor for a view: `inhibit_idle focus|fullscreen|open|none|visible` The modes are as follows: - focus: inhibited when the view is focused by any seat - fullscreen: inhibited when the view is fullscreen (or a descendant of a fullscreen container) and is visible on any output - open: inhibited until the view is closed or the inhibitor is unset or changed - none: unsets any user set idle inhibitors for the view - visible: inhibited when the view is visible on any output This should have no effect on idle inhibitors set by the applications themselves and those should still work as intended. Since this operates on the view in the handler context, it is possible to set it on the currently focused view, on any existing view with criteria, or for any future view with for_window.
2019-03-24Add support for manually setting subpixel hinting on outputs.Geoff Greer
Many laptop screens report unknown subpixel order. Allow users to manually set subpixel hinting to work around this. Addresses https://github.com/swaywm/sway/issues/3163
2019-03-19Support WLR_INPUT_DEVICE_SWITCH in swayRyan Walklin
This commit adds support for laptop lid and tablet mode switches as provided by evdev/libinput and handled by wlroots. Adds a new bindswitch command with syntax: bindswitch <switch>:<state> <command> Where <switch> is one of: tablet for WLR_SWITCH_TYPE_TABLET_MODE lid for WLR_SWITCH_TYPE_LID <state> is one of: on for WLR_SWITCH_STATE_ON off for WLR_SWITCH_STATE_OFF toggle for WLR_SWITCH_STATE_TOGGLE (Note that WLR_SWITCH_STATE_TOGGLE doesn't map to libinput and will trigger at both on and off events)
2019-02-17Remove refs to unimplemented debuglog commandDrew DeVault
Closes #3695
2019-01-31pointer_constraint: change to a seat subcommandBrian Ashworth
This changes the `pointer_constraint` command to be a subcommand of seat to allow for per-seat settings. The current implementation that is not a seat subcommand will only operate on the current seat and will segfault in the config due to `config->handler_context.seat` only being set at runtime. This also allows for the wildcard identifier to be used to alter the pointer constraint settings on all seats and allows for the setting to be merged with the rest of the seat config.
2019-01-30Add pointer_constraint commandDrew DeVault
2019-01-16bar_cmd_tray_bind: Use mouse button helpersBrian Ashworth
This modifies `bar_cmd_tray_bindsym` to use `get_mouse_bindsym` for parsing mouse buttons. This also introduces `bar_cmd_tray_bindcode`, which will use `get_mouse_bindcode` for parsing mouse buttons. Like with sway bindings, the two commands are encapsulated in a single file to maximize shared code. This also modifies tray bindings to work off of events codes rather than x11 buttons, which allows for any mouse buttons to be used. For `get_bar_config`, `event_code` has been added to the `tray_bindings` section and will include to event code for the button. If the event code can be mapped to a x11 button, `input_code` will still be the x11 button number. Otherwise, `input_code` will be `0`.
2019-01-15Resize only current and immediate siblings rather than all siblingsRyan Dwyer
For example, create layout V[view view view] and resize the leftmost view using mod+rightclick. Previously, the edge between view 2 and 3 would be adjusted as well. Now this edge will remain constant, which matches the behaviour of i3. To do this operation correctly, the resize tiling seatop now keeps track of two containers, as the container that resizes horizontally will be a different container to the one which resizes vertically (one will be an ancestor). The tiling resize seatop now figures out these containers during the start of the operation and keeps references to them in the event. A new function container_find_resize_parent has been introduced to do this. This function is also used by the resize command. During cursor motion, the seatop logic is similar to before, but now has to choose the correct container to resize. In resize.c, container_resize_tiled and resize_tiled have been merged into one. One of them originally did nothing except pass the values through to the other. container_resize_tiled now takes a simplified approach where it just finds the immediate siblings on either side and resizes them without worrying about the others. The parellel_coord and parallel_size functions are no longer needed and have been removed.
2019-01-14Remove now-unused "input" argument of cmd_results_newM Stoeckl
Patch tested by compiling with `__attribute__ ((format (printf, 2, 3)))` applied to `cmd_results_new`. String usage constants have been converted from pointers to arrays when encountered. General handler format strings were sometimes modified to include the old input string, especially for unknown command errors.
2019-01-14Remove 'input' field of IPC command return jsonM Stoeckl
This field is not in i3 and provides imprecise and redundant information. (Specifically, when swaymsg is given a list of commands, the IPC return array already indicates precisely which number command failed; knowing the name of the command is not useful when multiple commands of the same type are provided.)
2019-01-13Merge pull request #3144 from emersion/cmd-xwaylandDrew DeVault
Add xwayland command
2019-01-13Merge pull request #3344 from RedSoxFan/bar-mouse-bindings-improvedDrew DeVault
Improve mouse button parsing: bar mouse bindings
2019-01-11swaybar: add status_edge_padding commandBrian Ashworth
This adds the bar subcommand `status_edge_padding <padding>` to set the padding used when the status line is on the right edge of the bar.
2019-01-11swaybar: add status_padding commandBrian Ashworth
Adds the bar subcommand `status_padding <padding>` which allows setting the padding used for swaybar. If `status_padding` is set to `0`, blocks will be able to take up the full height of the bar.
2019-01-10bar_cmd_bind: utilize mouse button helpersBrian Ashworth
This modifies `bar_cmd_bindsym` to use `get_mouse_bindsym` for parsing mouse buttons. This also introduces `cmd_bar_bindcode`, which will use `get_mouse_bindcode` for parsing mouse buttons. Like sway bindings, the two commands are encapsulated in a single file with shared code. This also modifies swaybar to operate off of event codes rather than x11 button numbers, which allows for any mouse button to be used. This introduces two new IPC properties: - For `get_bar_config`, `event_code` has been added to the `bindings` section and will include to event code for the button. If the event code can be mapped to a x11 button, `input_code` will still be the x11 button number. Otherwise, `input_code` will be `0`. - Likewise for `click_events`, `event` has been added and will include the event code for the button clicked. If the event code can be mapped to a x11 button, `button` will still be the x11 button number. Otherwise, `button` will be `0`.