| Age | Commit message (Collapse) | Author |
|---|
|
Closes: https://github.com/swaywm/sway/issues/5412
|
|
This commit moves tool tip event generation into seatops. In doing so,
some corner cases where we'd erroneously (but likely harmlessly)
generate both tablet and pointer events simultaneously are eliminated.
|
|
Client-side decorations lead to changes to y position, so make sure we
catch that.
|
|
The adjustments to resize logic left them unnecessary.
|
|
Some comments where slightly misleading.
|
|
The centering logic needs to take borders, titlebars and CSDs into
account. Instead of using the main surface geometry, use the container
and view geometry, which account for this.
|
|
Updating the current size outside transactions lead to rendering
glitches during resizes.
|
|
During the execution of a resize transaction, the buffer associated
with a view's surface is saved and reused until the client acknowledges
the resulting configure event.
However, only one the main buffer of the main surface was stored and
rendered, meaning that subsurfaces disappear during resize.
Iterate over all, store and render buffers from all surfaces in the view
to ensure that correct rendering is preserved.
|
|
This is necessary because some applications (e.g. Jetbrains IDEs)
represent their multi-level menus as unmanaged surfaces, and when
closing a submenu, the main menu should get input focus.
Closes #5347.
|
|
This fixes bugs where a floating container would take input way past its
borders when its parent was fullscreen, since the call to
`tiling_container_at` in input/cursor.c's `node_at_coords` did not check
bounds.
|
|
Fixes #5286
|
|
This emits frame events for the seat_cmd_cursor subcommands. The
wl_pointer frame event are required to notify clients when to process
the events. It will now be emitted after cursor movement, button press,
button release, and axis events.
|
|
This is a tiny cleanup commit that renames `simulated_tool_tip_down` to
`simulating_pointer_from_tool_tip`, making it match
`simulating_pointer_from_touch`.
This is a better name since it makes it clear that it's the *pointer*
that's being simulated, not the tool tip.
|
|
After swaywm/wlroots#2023, #4996 inverted configuration transformations.
For consistency, we should undo (double-apply) the inversion when
communicating via IPC.
Closes #5356.
|
|
The spec has this to say about sending events on confine creation:
Whenever the confinement is activated, it is guaranteed that the
surface the pointer is confined to will already have received pointer
focus and that the pointer will be within the region passed to the
request creating this object.
...and on region update:
If warped, a wl_pointer.motion event will be emitted, but no
wp_relative_pointer.relative_motion event.
Prior to this patch, sway did neither, and updated the hardware cursor
position without notifying the underlying surface until the next motion
event. This led to inconsistent results, especially in applications that
draw their own software cursor.
|
|
Though unlikely, this commit makes server initialization totally
explicit in the logs.
|
|
set_region accepts a NULL *data, so we can't use it to reference the
constraint and find the cursor through its seat.
Fixes #5386.
|
|
Fixes #5383, caused by an oversight in 6f0a0bd.
|
|
Currently, when tablet input exits a window during an implicit grab, it
passes focus to another window.
For instance, this is problematic when trying to drag a scrollbar, and
exiting the window — the scrollbar motion stops. Additionally,
without `focus_follows_mouse no`, the tablet passes focus to whatever
surface it goes over regardless of if there is an active implicit.
If the tablet is over a surface that does not bind tablet handlers, sway
will fall back to pointer emulation, and all of this works fine. It
probably should have consistent behavior between emulated and
not-emulated input, though.
This commit adds a condition for entering seatop_down when a tablet's
tool tip goes down, and exiting when it goes up. Since events won't be
routed through seatop_default, this prevents windows losing focus during
implicit grabs.
Closes #5302.
|
|
On some terminals under default settings, black is truly rendered as
`#000`, making it unreadable when the background is also black.
Closes #5141.
|
|
|
|
- Remove struct definitions
- Remove struct members
- Remove initializations and frees
|
|
|
|
Refs #5268.
|
|
For some reason my version of sway doesn't show workspace names:
$ swaymsg -t get_outputs
Output HDMI-A-1 '(null) (null) (null)' (inactive)
Output HDMI-A-2 '(null) (null) (null)' (inactive)
Which is weird, but it's no reason to crash swaybar. The field is
totally missing from the JSON, so it ends up doing strcmp(NULL, name)
which is undefined behavior.
|
|
|
|
Keyboard group keyboards should not call sway_keyboard_configure. They
do not have an input config and they derive their state from the
keyboards within the group.
For some reason, I got sway_keyboard_configure and
seat_configure_keyboard mixed up and thought seat_reset_device called
the latter.
Calling sway_keyboard_configure with a keyboard group's keyboard is not
supported and can cause issues. If any clients are listening to the ipc
input event, a sigsegv will occur due to not every property - such as
identifier - being wired up for keyboard group keyboard's.
This also adds an assertion to sway_keyboard_configure to ensure that
this does not occur in the future and any instances are quickly caught.
|
|
|
|
If the keyboard that triggers the reload binding is using the default
keymap, default repeat delay, and default repeat rate, the associated
keyboard group is never being destroyed on reload. This was causing the
keyboard group's keyboard not to get disarmed and result in a
use-after-free in handle_keyboard_repeat.
If the keyboard was not using the defaults for all three settings, then
it's associated keyboard would get destroyed during the reset - which
did disarm the keyboard group's keyboard. In this case, the
use-after-free would not occur.
This adds a block to input_manager_reset_all_inputs that resets the
keyboard for all keyboard groups in all seats, which will disarm them.
Since the inputs are all being reset anyway, which will reset all
individual keyboards, it is not necessary to be selective on which ones
get reset.
|
|
Remove the entries from meson.build as well.
|
|
Add a separate per-view shortcuts_inhibitor command that can be used
with criteria to override the per-seat defaults. This allows to e.g.
disable shortcuts inhibiting globally but enable it for specific,
known-good virtualization and remote desktop software or, alternatively,
to blacklist that one slightly broken piece of software that just
doesn't seem to get it right but insists on trying.
Add a flag to sway_view and handling logic in the input manager that
respects that flag if configured but falls back to per-seat config
otherwise. Add the actual command but with just enable and disable
subcommands since there's no value in duplicating the per-seat
activate/deactivate/toggle logic here. Split the inhibitor retrieval
helper in two so we can use the backend half in the command to retrieve
inhibitors for a specific surface and not just the currently focused
one. Extend the manual page with documentation of the command and
references to its per-seat sibling and usefulness with criteria.
Signed-off-by: Michael Weiser <michael.weiser@gmx.de>
|
|
|
|
Fixes: https://github.com/swaywm/sway/pull/5250
|
|
Closes #5268.
|
|
The current documentation for repaint scheduling is very technical and
somewhat confusing.
Closes: https://github.com/swaywm/sway/issues/4769
|
|
|
|
This is a small cleanup commit for removing `sway_tablet` parameters
from functions that already accept `sway_tablet_tool`, since the tablet
reference can be accessed through `tool->tablet`.
|
|
Added in swaywm/wlroots#2172, so that sway doesn't need to maintain
an independent copy of this function.
|
|
|
|
|
|
Make notifications a separate flag. Personally, I trigger grimshot
myself most of the time (via sway bindsym) rather than by some external
means, so I don't need to be notified of it happening.
However, keep a flag with this functionality there for those scenarios
there it's necessary to inform the user.
Also print the file location when saving the screenshot.
|
|
(with slurp)
|
|
Show the usage output when an invalid command is received. Otherwise
things like `grimshot --help` save a screenshot, which is really
unexpected and hurts users trying to remember the right commands /
arguments.
|
|
Due to the date format used, if several screenshots are taken in
succession, each one overwrote the other.
This change set makes each one have a different name to avoid this.
Also avoid using spaces, since many scripts and tools are unhappy with
file names with spaces.
|
|
`$XDG_PICTURES_DIR` is a very loosely defined thing; it's a directory
where "pictures" are stored, which no clearer definition.
Some people use it for photographs they take, other use it for images
they save from the internet, and others use it for screenshots.
Having lots of tools save their output there (anything that's an image
goes there) can easily make it a kitchen sink.
To work around this, use `$XDG_SCREENSHOTS_DIR` as a target directory
for screenshots by default. If not-so-standard variable is unset, fall
back to the previous setting; `$XDG_PICTURES_DIR`.
This also drops an external dependency, which was (a) an overkill (b)
not flexible enough.
|
|
Touch events hide the cursor so unhiding it again only causes it to
flicker.
|
|
The type expected by wlroots is uint32_t, which `event->button`
already is.
|
|
This commit renames `motion` and `axis` handlers to `pointer_motion` and
`pointer_axis`, respectively, to disambiguate them from their tablet
(and future touch) handlers. `button` is left as-is, as it is generic
across input devices.
|
|
This commit moves tablet motion logic into a seatop handler.
As a side-effect of seatop implementations being able to receive
tablet motion events, fixes #5232.
|
|
|
