aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-12-30Remove create_renderer_func argumentSimon Ser
It's removed upstream [1]. [1]: https://github.com/swaywm/wlroots/pull/2561
2020-12-29ci: enable basu on freebsdJan Beich
2020-12-26Remove Patreon links from README.*.mdDrew DeVault
2020-12-26Remove .github/FUNDING.ymlDrew DeVault
Since I'm no longer a maintainer of, or regular contributor to, this project, it doesn't make sense to solicit donations.
2020-12-26grimshot: Fix man page issuesWilliam Culhane
This fixes a few formatting errors in SYNOPSIS, moves the command options out of SYNOPSIS, swaps the labels on the SYNOPSIS and DESCRIPTION sections, creates an EXAMPLES section and slightly rewords parts of the OPTIONS, DESCRIPTION, EXAMPLES, and OUTPUT sections.
2020-12-24container: set fullscreen mode before attempting focusRonan Pigott
2020-12-20workspace: rework workspace prev|next like i3Ronan Pigott
Changes workspace prev|next commands to visit each numbered or named workspace first before considering workspace from the other category
2020-12-20commands/move: reset geometry of promoted containersRonan Pigott
2020-12-20commands/move: squash workspace after directional con moveRonan Pigott
2020-12-20introduce workspace_squashRonan Pigott
workspace_squash is container_flatten in the reverse direction. Instead of eliminating redundant splits that are parents of the target container, it eliminates pairs of redundant H/V splits that are children of the workspace. Splits are redundant if a con and its grandchild have the same layout, and the immediate child has the opposite split. For example, layouts are transformed like: H[V[H[app1 app2]] app3] -> H[app1 app2 app3] i3 uses this operation to simplify the tree after moving heavily nested containers to a higher level in the tree via an orthogonal move.
2020-12-20commands/move: rework container_move_in_directionRonan Pigott
This changes the move command to better match i3 behavior after the layout changes. workspace_rejigger handled the case where containers would escape their workspace in an orthogonal move by changing the layout to accomodate them, but this case is now handled within the loop.
2020-12-20Change workspace_layout to match i3 behaviorRonan Pigott
In i3, the workspace_layout command does not affect the workspace layout. Instead, new workspace level containers are wrapped in the desired layout and the workspace layout always defaults to the output orientation.
2020-12-20Revert "commands/move: maintain workspace_layout when moving"Ronan Pigott
This is in preparation for changing the workspace_layout command to work like it does in i3. This reverts commit b4a75a1ab2a72842830aeea37733311f85e6f660.
2020-12-20commands/move: don't flatten on move; reap empty former parent insteadTudor Brindus
Some comparisons of current Sway versus i3 behavior: 1) T[T[T[app]]] + move left * Sway: T[app] * i3: T[T[app]] 2) H[V[H[V[app]]]] + move left * Sway: H[app] * i3: H[V[app]] After this commit, Sway behavior matches i3. The intermediate states are now: T[T[T[app]]] -> T[T[app T[]]] -> T[T[app]] H[V[H[V[app]]]] -> H[V[app H[V[]]]] -> H[V[app]]
2020-12-20commands/layout: don't change the layout of workspaces with childrenRonan Pigott
In i3 the layout command on a workspace affects the workspace layout only on empty workspaces. Otherwise children are placed in a new container with the desired layout to preserve the workspace layout.
2020-12-20container: don't split single childrenRonan Pigott
In i3 splits are ineffective on singleton H/V containers, and the command is interpreted to affect the parent layout instead.
2020-12-20Test output before direct scan-outSimon Ser
This avoids some log spam. Eventually when we wire up the atomic test commit this will take care of the other log spam referenced below. References: https://github.com/swaywm/sway/pull/5010 References: https://github.com/swaywm/wlroots/issues/2181 Closes: https://github.com/swaywm/wlroots/issues/2532
2020-12-18readme: use references for linksSimon Ser
This avoids cluttering the README text with URLs.
2020-12-18ISSUE_TEMPLATE: the wiki is community maintainedRouven Czerwinski
Mention that the github wiki may contain outdated information scripts and old workarounds and that sway the sway project does not provide support for it.
2020-12-18readme: remove link to non-existing wiki pageSimon Ser
2020-12-18readme: releases are signed with E88F5E48Simon Ser
See https://github.com/swaywm/wlroots/issues/2462#issuecomment-723578521
2020-12-16Fix swaybar tray for non-systemdArav K
Meson's generated config.h header defines false macros as 0, not undefined. This means that the header line, which was checking for the definition existing, not a non-zero value, was incorrect. Now the swaybar tray can be used with systemd, elogind, or basu.
2020-12-14ci: fix archlinux buildsRonan Pigott
The "xorg-server-xwayland" package has become "xorg-xwayland" in Arch. Our egl requirement was previously satisfied by xorg-server-xwayland's dependency on libgl, which "xorg-xwayland" does not have. So add the libegl dependency as well.
2020-12-10common/log: write log importanceSimon Ser
When colors aren't used, write the log importance to stderr. This makes it easier to grep for errors and avoids mistaking error messages for debug messages. This is [1] ported to Sway. [1]: https://github.com/swaywm/wlroots/pull/2149
2020-12-09Route wlroots logs into Sway logging infrastructureSimon Ser
Instead of letting wlroots print messages to stdout, route debugging messages into Sway's logging functions. This allows a more consistent output (e.g. if Sway or wlroots changes its output style, they don't get out-of-sync). I also added a [wlr] prefix to wlroots messages, not yet sure it's a good thing.
2020-12-09build: add basu as sd-bus providerSimon Ser
2020-12-09build: introduce sd-bus-provider optionSimon Ser
This allows to select a specific provider for the sd-bus library.
2020-12-09build: use WLR_HAS_* to decide whether suid is requiredSimon Ser
Maybe systemd/elogind is found but wlroots was built without them. Print the warning message depending on the WLR_HAS_* defines instead. While at it, don't print the message if wlroots has been build with libseat.
2020-12-08Handle secondary headless backend failuresSimon Ser
2020-12-08Drop gtk-primary-selection supportIsaac Freund
2020-12-07Add layer shell subsurfacesVlad Pănăzan
Damage subsurfaces created by layer surfaces on map, unmap and commit. This fixes the flicker of Gtk Popovers. Fixes #5617
2020-12-06input/cursor: unhide cursor on synthetic inputTudor Brindus
Fixes #5847.
2020-12-04criteria: fix crash when comparing NULL propertiesPaul Riou
For each following combinations of criteria & command below, the command would crash sway without the fix. It's particular about the __focused__ criteria, where the view matches part of the criteria but not the focused app, leading to a failure when calling `strcmp` with NULL. "xterm" is a non-wayland app (X11) and "kitty" is. Both are terminals. # "class" is specific to X11 # The view is X11 (xterm) leading to the criteria checking for the # focused app's class, leading to a crash for_window [class="__focused__"] floating enable exec kitty -e xterm # Similarly, crash as the focused app (xterm) has no app_id when the view has one for_window [app_id="__focused__"] floating enable exec xterm -e kitty # If the view has a title but not the focused app: NULL title will crash criteria checking for_window [title="__focused__"] floating enable exec xterm -title "" -e xterm
2020-12-04common: make 'lenient_strcmp' arguments constPaul Riou
Prevents build failures when calling the function with 'const char *' arguments. This is also more accurate since the function is not expected to modify the args.
2020-11-24xdg_shell: allow views to change geometry anytimeRonan Pigott
Currently, when sway sends a configure with some geometry and the client responds with a different geometry in a commit that acks that configure, sway ignores the new size. Sway applies the surface geometry it had requested to the container, not what was actually committed, in the following transaction. This change allows any client commit to change its surface geometry, even if it is a response to a configure event.
2020-11-21document parse_errorRex Hackbro
2020-11-16Small wording change to README.ja.mdTudor Brindus
見落とされていた英語の単語を置き換える。
2020-11-16Log which output is using direct scan-outSimon Ser
2020-11-12input/keyboard: fix Group# bindings for keyboard groupsBrian Ashworth
The keyboard group's effective keyboard layout was never being changed due to a condition that incorrectly preventing it from being performed. The IPC event that follows the change was correctly being prevented.
2020-11-11tree/container: introduce `container_is_sticky[_or_child]` functionsTudor Brindus
To query whether a container is sticky, checking `con->is_sticky` is insufficient. `container_is_floating_or_child` must also return true; this led to a lot of repetition. This commit introduces `container_is_sticky[_or_child]` functions, and switches all stickiness checks to use them. (Including ones where the container is already known to be floating, for consistency.)
2020-11-11Add missing includes for wlr_input_device.hSimon Ser
References: https://github.com/swaywm/wlroots/pull/2470
2020-11-11Replace wlr_key_state with wl_keyboard_key_stateSimon Ser
References: https://github.com/swaywm/wlroots/pull/2446
2020-11-08build: bump wlroots dependency to 0.12.0Simon Ser
2020-11-05input/seatop_default: consider fullscreen views to have no edgesTudor Brindus
Previously, `find_edge` on a single fullscreen view would occasionally return an edge rather than `WLR_EDGE_NONE`. This would trigger entry into `seatop_resize_tiling`, which doesn't have meaning for a fullscreen view. The result was that the fullscreen container hitbox was considered to be that of where it'd be if it were tiling, so most clicks would not go through. Fixes #5792.
2020-11-05fix typoheitor
2020-11-05update portuguese README (fix typos, update informations...)heitor
2020-11-01input: fully change focus when scrolling tabs/stacksTudor Brindus
When scrolling on a tabbed/stacked container, i3 focuses its inactive-focused focused child. Sway does the same, but then resets the focus to whatever was focused previously. Ref https://github.com/i3/i3/blob/e5992eed163179f5cd2715c2c212d3d757f04b31/src/click.c#L207-L219
2020-11-01commands/focus: force container warp when fulfilling `focus mode_toggle`Tudor Brindus
This commit switches focusing behavior to force a warp when executing `focus mode_toggle`. Fixes #5772.
2020-10-31input: remove motion deltas from seatop callbacksTudor Brindus
Straightforward cleanup, they haven't been used for a while.
2020-10-30hide_cursor: Add an option to hide when typingTamir Zahavi-Brunner
Add an option for the `hide_cursor` command to hide the cursor when typing, i.e. whenever a key is pressed.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 09:19:41 +0000