From e82653782e1803e3c924aef055113333b18dafd9 Mon Sep 17 00:00:00 2001 From: Patrick Lauer Date: Tue, 9 Feb 2016 15:30:46 -0600 Subject: Add a basic OpenRC users guide X-Gentoo-Bug: 513024 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=513024 --- guide.md | 251 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 251 insertions(+) create mode 100644 guide.md (limited to 'guide.md') diff --git a/guide.md b/guide.md new file mode 100644 index 00000000..c8c51d72 --- /dev/null +++ b/guide.md @@ -0,0 +1,251 @@ +# Purpose and description + +OpenRC is an init system for Unixoid operating systems. It takes care of +startup and shutdown of the whole system, including services. + +It evolved out of the Gentoo "Baselayout" package which was a custom pure-shell +startup solution. (This was both hard to maintain and debug, and not very +performant) + +Most of the core parts are written in C99 for performance and flexibility +reasons, while everything else is posix sh. +The License is 2-clause BSD + +Current size is about 10k LoC C, and about 4k LoC shell. + +OpenRC is known to work on Linux, many BSDs (FreeBSD, OpenBSD, DragonFlyBSD at +least) and HURD. + +Services are stateful (i.e. start; start will lead to "it's already started") + +# Startup + +Usually PID1 (aka. init) calls the OpenRC binary ("/sbin/openrc" by default). +(The default setup assumes sysvinit for this) + +openrc scans the runlevels (default: "/etc/runlevels") and builds a dependency +graph, then starts the needed service scripts, either serialized (default) or in +parallel. + +When all the init scripts are started openrc terminates. There is no persistent +daemon. (Integration with tools like monit, runit or s6 can be done) + +# Shutdown + +On change to runlevel 0/6 or running "reboot", "halt" etc., openrc stops all +services that are started and runs the services in the "shutdown" runlevel. + +# Modifying Service Scripts + +Any service can, at any time, be started/stopped/restarted by executing +"rc-service someservice start", "rc-service someservice stop", etc. +Another, less preferred method, is to run the service script directly, +e.g. "/etc/init.d/service start", "/etc/init.d/service stop", etc. + +OpenRC will take care of dependencies, e.g starting apache will start network +first, and stopping network will stop apache first. + +There is a special command "zap" that makes OpenRC 'forget' that a service is +started; this is mostly useful to reset a crashed service to stopped state +without invoking the (possibly broken) stop function of the service script. + +Calling "openrc" without any arguments will try to reset all services so +that the current runlevel is satisfied; if you manually started apache it will be +stopped, and if squid died but is in the current runlevel it'll be restarted. + +There is a "service" helper that emulates the syntax seen on e.g. older Redhat +and Ubuntu ("service nginx start" etc.) + +# Runlevels + +OpenRC has a concept of runlevels, similar to what sysvinit historically +offered. A runlevel is basically a collection of services that needs to be +started. Instead of random numbers they are named, and users can create their +own if needed. This allows, for example, to have a default runlevel with +"everything" enabled, and a "powersaving" runlevel where some services are +disabled. + +The "rc-status" helper will print all currently active runlevels and the state +of init scripts in them: + +# rc-status + * Caching service dependencies ... [ ok ] +Runlevel: default + modules [ started ] + lvm [ started ] + +All runlevels are represented as folders in /etc/runlevels/ with symlinks to +the actual init scripts. + +Calling openrc with an argument ("openrc default") will switch to that +runlevel; this will start and stop services as needed. + +Managing runlevels is usually done through the "rc-update" helper, but could of +course be done by hand if desired. +e.g. "rc-update add nginx default" - add nginx to the default runlevel +Note: This will not auto-start nginx! You'd still have to trigger "rc" or run +the initscript by hand. + +FIXME: Document stacked runlevels + +The default startup uses the runlevels "boot", "sysinit" and "default", in that +order. Shutdown uses the "shutdown" runlevel. + + +# Syntax of Service Scripts + +Service scripts are shell scripts. OpenRC aims at using only the standardized +POSIX sh subset for portability reasons. The default interpreter (build-time +toggle) is /bin/sh, so using for example mksh is not a problem. + +OpenRC has been tested with busybox sh, ash, dash, bash, mksh, zsh and possibly +others. Using busybox sh has been difficult as it replaces commands with +builtins that don't offer the expected features. + +The interpreter for initscripts is #!/sbin/openrc-run +Not using this interpreter will break the use of dependencies and is not +supported. (iow: if you insist on using #!/bin/sh you're on your own) + +A "depend" function declares the dependencies of this service script. +All scripts must have start/stop/status functions, but defaults are provided. +Extra functions can be added easily: + +extra_commands="checkconfig" +checkconfig() { + doSomething +} + +This exports the checkconfig function so that "/etc/init.d/someservice +checkconfig" will be available, and it "just" runs this function. + +While commands defined in extra_commands are always available, commands +defined in extra_started_commands will only work when the service is started +and those defined in extra_stopped_commands will only work when the service is +stopped. This can be used for implementing graceful reload and similar +behaviour. + +Adding a restart function will not work, this is a design decision within +OpenRC. Since there may be dependencies involved (e.g. network -> apache) a +restart function is in general not going to work. +restart is internally mapped to stop() + start() (plus handling dependencies). +If a service needs to behave differently when it is being restarted vs +started or stopped, it should test the $RC_CMD variable, for example: + + [ "$RC_CMD" = restart ] && do_something + + +# The Depend Function + +This function declares the dependencies for a service script. This +determines the order the service scripts start. + +depend() { + need net + use dns logger netmount + want coolservice +} + +"need" declares a hard dependency - net always needs to be started before this + service does +"use" is a soft dependency - if dns, logger or netmount is in this runlevel + start it before, but we don't care if it's not in this runlevel. + "want" is between need and use - try to start coolservice if it is + installed on the system, regardless of whether it is in the + runlevel, but we don't care if it starts. +"before" declares that we need to be started before another service +"after" declares that we need to be started after another service, without + creating a dependency (so on calling stop the two are independent) +"provide" allows multiple implementations to provide one service type, e.g.: + 'provide cron' is set in all cron-daemons, so any one of them started + satisfies a cron dependency +"keyword" allows platform-specific overrides, e.g. "keyword -lxc" makes this + service script a noop in lxc containers. Useful for things like keymaps, + module loading etc. that are either platform-specific or not available + in containers/virtualization/... + +FIXME: Anything missing in this list? + +# The Default Functions + +All service scripts are assumed to have the following functions: + +start() +stop() +status() + +There are default implementations in rc/sh/runscript.sh - this allows very +compact service scripts. These functions can be overridden per service script as +needed. + +The default functions assume the following variables to be set in the service +script: + +command= +command_args= +pidfile= + +Thus the 'smallest' service scripts can be half a dozen lines long + +# The Magic of Conf.d + +Most service scripts need default values. It would be fragile to +explicitly source some arbitrary files. By convention openrc-run will source +the matching file in /etc/conf.d/ for any script in /etc/init.d/ + +This allows you to set random startup-related things easily. Example: + +conf.d/foo: +START_OPTS="--extraparameter sausage" + +init.d/foo: +start() { + /usr/sbin/foo-daemon ${STARTOPTS} +} + +The big advantage of this split is that most of the time editing of the init +script can be avoided. + +# Start-Stop-Daemon + +OpenRC has its own modified version of s-s-d, which is historically related and +mostly syntax-compatible to Debian's s-s-d, but has been rewritten from scratch. + +It helps with starting daemons, backgrounding, creating PID files and many +other convenience functions related to managing daemons. + +# /etc/rc.conf + +This file manages the default configuration for OpenRC, and it has examples of +per-service-script variables. + +Among these are rc_parallel (for parallelized startup), rc_log (logs all boot +messages to a file), and a few others. + +# ulimit and CGroups + +Setting ulimit and nice values per service can be done through the rc_ulimit +variable. + +Under Linux, OpenRC can optionally use CGroups for process management. +By default each service script's processes are migrated to their own CGroup. + +By changing certain values in the conf.d file limits can be enforced per +service. It is easy to find orphan processes of a service that persist after +stop(), but by default these will NOT be terminated. +To change this add rc_cgroup_cleanup="yes" in the conf.d files for services +where you desire this functionality. + +# Caching + +For performance reasons OpenRC keeps a cache of pre-parsed initscript metadata +(e.g. depend). The default location for this is /${RC_SVCDIR}/cache. + +The cache uses mtime to check for file staleness. Should any service script +change it'll re-source the relevant files and update the cache + +# Convenience functions + +OpenRC has wrappers for many common output tasks in libeinfo. +This allows to print colour-coded status notices and other things. +To make the output consistent the bundled initscripts all use ebegin/eend to +print nice messages. -- cgit v1.2.3