From 2108285d64e2ee8cc03fbe544efc3752fe349bdd Mon Sep 17 00:00:00 2001 From: William Hubbs Date: Tue, 19 Jul 2016 10:22:17 -0500 Subject: conf.d: remove network file fragnents --- conf.d/network.BSD.in | 4 ---- conf.d/network.GNU-kFreeBSD.in | 4 ---- conf.d/network.GNU.in | 4 ---- conf.d/network.Linux.in | 43 ------------------------------------------ conf.d/network.in | 28 --------------------------- 5 files changed, 83 deletions(-) delete mode 100644 conf.d/network.BSD.in delete mode 100644 conf.d/network.GNU-kFreeBSD.in delete mode 100644 conf.d/network.GNU.in delete mode 100644 conf.d/network.Linux.in delete mode 100644 conf.d/network.in (limited to 'conf.d') diff --git a/conf.d/network.BSD.in b/conf.d/network.BSD.in deleted file mode 100644 index 9f49b81a..00000000 --- a/conf.d/network.BSD.in +++ /dev/null @@ -1,4 +0,0 @@ - -# You can assign a default route -#defaultroute="192.168.0.1" -#defaultroute6="2001:a:b:c" diff --git a/conf.d/network.GNU-kFreeBSD.in b/conf.d/network.GNU-kFreeBSD.in deleted file mode 100644 index 9f49b81a..00000000 --- a/conf.d/network.GNU-kFreeBSD.in +++ /dev/null @@ -1,4 +0,0 @@ - -# You can assign a default route -#defaultroute="192.168.0.1" -#defaultroute6="2001:a:b:c" diff --git a/conf.d/network.GNU.in b/conf.d/network.GNU.in deleted file mode 100644 index 78aa412e..00000000 --- a/conf.d/network.GNU.in +++ /dev/null @@ -1,4 +0,0 @@ - -# You can assign a default route -#defaultroute="gw 192.168.0.1" -#defaultroute6="gw 2001:a:b:c" diff --git a/conf.d/network.Linux.in b/conf.d/network.Linux.in deleted file mode 100644 index f57ec91a..00000000 --- a/conf.d/network.Linux.in +++ /dev/null @@ -1,43 +0,0 @@ - -# You can assign a default route -#defaultroute="gw 192.168.0.1" -#defaultroute6="gw 2001:a:b:c" - -# ifconfig under Linux is not that powerful and doesn't easily handle -# multiple addresses -# On the other hand, ip (iproute2) is quite powerful and is also supported -#ip_eth0="192.168.0.10/24; 192.168.10.10/24" - -# You can also use ip to add the default route. -#defaultiproute="via 192.168.0.1" -#defaultiproute6="via 2001:a:b:c" - -# ip doesn't handle MTU like ifconfig, but we can do it like so -#ifup_eth0="ip link set \$int mtu 1500" - -# Create a bonded interface -#interfaces="bond0" -#ifup_bond0="modprobe bonding; ifconfig \$int up; ifenslave \$int bge0" -#ifconfig_bond0="192.168.0.10 netmask 255.255.255.0" -#ifdown_bond0="rmmod bonding" - -# Create tap interface and a bridge interface. -# We add the tap to the bridge. -# An external program, like dhcpcd, will configure the IP on the bridge -#interfaces="tun0 br0" -#ifup_tun0="tunctl -t \$int" -#ifdown_tun0="tunctl -d \$int" -#ifup_br0="brctl addbr \$int; brctl add \$int eth1; brtctl add \$int eth2" -#ifdown_br0="ifconfig \$int down; btctl delbr \$int" - -# Create VLAN -#interfaces="eth0_2 eth0_3 eth0_4" -#ifup_eth0="vconfig add \$int 2; vconfig add \$int 3; vconfig add \$int 4" -#ifconfig_eth0_2="192.168.2.10 netmask 255.255.255.0" -#ifconfig_eth0_3="192.168.3.10 netmask 255.255.255.0" -#ifconfig_eth0_4="192.168.4.10 netmask 255.255.255.0" -#ifdown_eth0="vconfig rem \$int.2; vconfig rem \$int.3; vconfig rem \$int.4" - -# Normally you would use wpa_supplicant to configure wireless, but you can -# use iwconfig also -#ifup_wlan0="iwconfig \$int key s:secretkey enc open essid foobar" diff --git a/conf.d/network.in b/conf.d/network.in deleted file mode 100644 index d5477a0d..00000000 --- a/conf.d/network.in +++ /dev/null @@ -1,28 +0,0 @@ -# Assign static IP addresses and run custom scripts per interface. -# Seperate commands with ; -# Prefix with ! to run a shell script. -# Use \$int to represent the interface -#ifconfig_eth0="192.168.0.10 netmask 255.255.255.0" - -# You also have ifup_eth0 and ifdown_eth0 to run other commands when -# eth0 is started and stopped. -# You should note that we don't stop the network at system shutdown by default. -# If you really need this, then set keep_network=NO - -# Lastly, the interfaces variable pulls in virtual interfaces that cannot -# be automatically detected. -#interfaces="br0 bond0 vlan0" - -# You can also use files instead of variables here if you like: -# /etc/ifconfig.eth0 is equivalent to ifconfig_eth0 -# /etc/ip.eth0 is equivalent to ifconfig_eth0 -# /etc/ifup.eth0 is equivalent to ifup_eth0 -# /etc/ifdown.eth0 is equivalent to ifdown_eth0 -# Any files found will automatically be put into the interfaces variable. -# You don't need to escape variables in files, so use $int instead of \$int. - -# If you require DHCP, you should install dhcpcd and it to the boot or -# default runlevel. - -# NIS users can set the domain name here -#domainname="foobar" -- cgit v1.2.3