aboutsummaryrefslogtreecommitdiff
path: root/src
AgeCommit message (Collapse)Author
2014-10-23fix defines for GNU/HurdSvante Signell
2014-10-22Fix rc_svcdir for GNU/kFreeBSDGabriele Giacone
2014-10-22Fix GNU/kFreeBSD portSvante Signell
Check for __FreeBSD_kernel instead of __GLIBC__ in source files. note from William Hubbs: I was told this is a better check for GNU/kFreeBSD than checking the C library the source is being compiled against. GNU/kFreeBSD than checking which library we are using.
2014-10-22einfo.h, rc.h.in: simplify __BEGIN_DECLS logicAnthony G. Basile
There is no need to redefine __BEGIN_DECLS and __END_DECLS. We simplify the logic here and avoid undefining these macros.
2014-10-21einfo.h, rc.h.in: ensure __BEGIN_DECLS is definedAnthony G. Basile
Some Standard C Libraries, like musl, don't define __BEGIN_DECLS or __END_DECLS. We add some ifdef magic to ensure these are available.
2014-10-20librc:look for the pid file in a chroot if definedAlexander Vershilov
X-Gentoo-Bug: 524388 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=524388
2014-09-20typo fixWilliam Hubbs
2014-08-11Show rc and runscript deprecation warnings in verbose modeWilliam Hubbs
These messages are being changed for this release to show in verbose mode because of the number of times they display.
2014-07-28checkpath: apply ownership to all paths given on command lineWilliam Hubbs
The stat structure was not being initialized correctly in do_check. This was causing the owner adjustment to be skipped if the first path had the correct owner. Also, the "correcting owner" message should always be printed when the owner is being changed. X-Gentoo-Bug: 518042 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=518042
2014-07-25checkpath: style fixWilliam Hubbs
2014-07-19src/librc/librc-daemon.c: style fixWilliam Hubbs
2014-07-19src/rc/Makefile: typo fixWilliam Hubbs
2014-07-17rc-status: fix infinite loop when using stacked runlevelsWilliam Hubbs
Remove the recursive call in print_stacked_services which was causing an infinite loop when using stacked runlevels. I would like to thank Doug Freed and Jason Zaman for assisting with tracking this down. X-Gentoo-Bug: 514972 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=514972
2014-07-16move the selinux_setup function into rc-selinuxJason Zaman
X-Gentoo-Bug: 516956 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-16checkpath: style fixesWilliam Hubbs
2014-07-16style fixesWilliam Hubbs
2014-07-16Rename SELinux source filesWilliam Hubbs
The name rc-selinux-util.* is a bit long, so I renamed the source files to rc-selinux.* X-Gentoo-Bug: 516956 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-16checkpath: restore the SELinux contextJason Zaman
X-Gentoo-Bug: 516956 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-13checkpath: fix logic for the writable optionWilliam Hubbs
The -W option does not need an argument of its own; it can take the first path after all other options are processed on the command line. Also, move the processing for the -W option out of the switch so it will be in the same loop as the other processing.
2014-07-11checkpath: fix error message in previous commitWilliam Hubbs
2014-07-11checkpath: report an error if required options were not specifiedWilliam Hubbs
Before this commit, not specifying -d, -f, -p or -W in a checkpath command meant the command exited successfully but actually did nothing. This is an error condition, so report it as such.
2014-06-20librc: filter out container processes on OpenVZ hostWilliam Hubbs
Thanks to info and testing done by Daniel Robbins <drobbins@funtoo.org>, there is now a fix for this. Below is his description of the steps OpenRC needed to use. 1) See if /proc/<pid>/status exists 2) If it does, see if it has a "envID:" field 3) If it does, see if "envID:" is set to "0" 4) If so, then it's one of the host's processes and should be a candidate for the list. Otherwise, it is one of the container's processes and should be ignored. This should fix the bug and allow start-stop-daemon to work properly on OpenVZ hosts. X-Gentoo-Bug: 376817 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=376817
2014-01-18fstabinfo: fix mount and remountWilliam Hubbs
The mount and remount options should always be processed. They were only being processed if -q was not on the command line. X-Gentoo-Bug: 498206 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=498206
2014-01-13rc-update: add option to remove a service from all runlevelsBenda Xu
The -a option,which only applies to the del command, is used to remove a service from all runlevels. X-Gentoo-Bug: 497740 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=497740
2013-12-29Rename runscript to openrc-runWilliam Hubbs
This was requested by Debian, because the minicom software, which is available on Debian and other distros, has a binary named runscript. We are keeping a backward compatibility symlink for now, but this allows Debian or any other distro to safely remove the symlink. X-Gentoo-Bug: 494220 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=494220
2013-12-13add openrc binary to ignore patternsWilliam Hubbs
2013-12-13runscript: clarify the message wrt schedulingWilliam Hubbs
The message about a service being scheduled to start was confusing to some of our users; I was told this wording is more clear. X-Gentoo-Bug: 493070 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493070
2013-12-12Rename the rc binary to openrcWilliam Hubbs
Debian requested this rename due to the "rc" binary conflicting with the "rc" binary from the plan 9 shell. We also add a deprecation warning to the binary when it is run as rc to encourage users to switch to openrc instead. X-Gentoo-Bug: 493958 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493958
2013-12-01rc-update: make "service already installed" message informationalWilliam Hubbs
This message was being sent to stderr, and it should be sent to stdout since it is informational. This change was requested by zero_chaos.
2013-10-30Begin port to GNU/kFreeBSDSteven Chamberlain
This is just a minimal port to get Debian up and running; the rest will be done later.
2013-10-21librc: do not allow "." and ".." as runlevel namesWilliam Hubbs
The rc_runlevel_exists function was attempting to treat "." and ".." as valid runlevels; however, this should not be allowed. X-Gentoo-Bug: 488710 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=488710
2013-10-21Revert "Make einfo routines private"William Hubbs
This reverts commit de88aff0a839844526ae262f8961ec4372fed238. I was advised that splashutils links to libeinfo, so we do have a consumer for this library.
2013-10-12convert flock() messages to verbose warningsWilliam Hubbs
Convert these messages to warnings that are only displayed if EINFO_VERBOSE is set to yes in the environment. This is based on a suggestion from Patrick Lauer <patrick@gentoo.org>. X-Gentoo-Bug: 487588 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487588
2013-10-06start-stop-daemon: fix do_stop callsWilliam Hubbs
Several calls to do_stop were forcing the test parameter to be true, which was causing extra output to the terminal, such as: * Would send signal 0 to pid xxxxx This should only happen if the --test command line option was used.
2013-10-04librc: fix a read off-by-one bugNatanael Copa
We should first check if we are within bounds and then read rather than the opposite. This makes valgrind happy. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
2013-10-04librc: fix off-by-one bugNatanael Copa
We need allocate space for both the added leading '-' and the trailing '\0'. Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
2013-09-30start-stop-daemon: fix eerorr calls in get_pidWilliam Hubbs
The eerror calls in this function make it too verbose, so change them to ewarnv() calls instead. This means that they will only print if the --verbose option is used or EINFO_VERBOSE=yes is set in the environment.
2013-09-26Make einfo routines privateWilliam Hubbs
The libeinfo library has no consumers other than OpenRC, so there is no reason for it to be maintained as a library. The einfo routines are now an object that links with the rc binary.
2013-09-24start-stop-daemon: remove the verbose variableWilliam Hubbs
Along the same lines as the quiet variable, this is controlled by an environment variable for the einfo code, so we do not need a separate boolean flag.
2013-09-23start-stop-daemon: remove the quiet variableWilliam Hubbs
The suppression of output is controlled in the e* functions themselves, so there is no need for a variable to test in start-stop-daemon. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-09-23rc: add service to ignore patternsWilliam Hubbs
2013-09-23style fixesWilliam Hubbs
2013-09-20Fix stacked runlevel supportAlexander V Vershilov
Patch was provided by Max Hacking <max.gentoo.bugzilla@hacking.co.uk> and slightly fixed by Alexander Vershilov <qnikst@gentoo.org> and William Hubbs <williamh@gentoo.org>. Fixes: 1). Rebase to newest OpenRC version. 2). Remove code style fixes. Port to currect code style. 3). Fix rc_runlevel_stack instead of introducing new function. 4). Make get_runlevel_chain a private function. X-Gentoo-Bug: 467368 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=467368
2013-09-03rc: add support for suppressing error messagesWilliam Hubbs
Add support for suppressing error messages with --quiet specified twice on the command line. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-09-03libeinfo: add separate variable to suppress eerror messagesWilliam Hubbs
Add an EERROR_QUIET environment variable which works like EINFO_QUIET but for the eerror functions. This will allow library consumers to choose whether to suppress eerror messages separately from einfo and ewarn messages. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-08-28libeinfo: suppress output for eerror* functionsWilliam Hubbs
This makes the eerror* functions honor the EINFO_QUIET environment variable like the einfo* and ewarn* functions. X-Gentoo-Bug: 482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396
2013-08-27Revert "Libeinfo: do not suppress ewarn() messages"William Hubbs
This reverts commit 4ee62c7903c65557c493f51d6703264a816156cd. The previously referenced commit broke consistency because ewarnx() was respecting the EINFO_QUIET environment setting, but after this commit, ewarn() was not. Also, due to discussion on the below referenced bugs, I think we do want to suppress warnings when EINFO_QUIET=yes. X-Gentoo-Bug: 482396 X-Gentoo-Bug: 439174 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439174
2013-08-26start-stop-daemon: remove redundant test of the quiet valueWilliam Hubbs
The einfo() function tests for the EINFO_QUIET environment variable directly, and this is the variable that is set by the --quiet flag, so there was no reason for this test to exist.
2013-08-26start-stop-daemon: fix --quiet switchWilliam Hubbs
The --quiet switch wasn't really quiet, because we changed it to report errors. I am changing it back due to discussions on the listed bugs. X-Gentoo-Bug: 482396 X-Gentoo-Bug: 439174 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=482396 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439174
2013-07-25Add support for DragonFly BSDGary
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 08:11:10 +0000