aboutsummaryrefslogtreecommitdiff
path: root/sh
AgeCommit message (Collapse)Author
2014-10-22Add missing files for GNU/kFreeBSDGabriele Giacone
2014-10-20runscript.sh: add chroot supportWilliam Hubbs
This adds support for a chroot variable which will be passed to the start-stop-daemon --chroot switch to runscript.sh when starting a daemon. This also needs to be saved so it can be used in locating the pid file when stopping the daemon. X-Gentoo-Bug: 524388 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=524388
2014-09-11Use exception-based approach for cgroup/ulimit setupRoy Marples
Note from William Hubbs: I spoke with Roy about this, and he pointed out that user-defined functions may need the limits applied, so it is better to go with a method that uses exceptions to determine which functions apply the limits. X-Gentoo-Bug: 522408 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=522408
2014-09-11runscript: move verbose mode setting near debug settingWilliam Hubbs
2014-08-27tmpfiles.sh: add support for C actionAndrew Gregory
Recursively copies files or directories. Added by systemd in 849958d1.
2014-08-27tmpfiles.sh: add support for + modifierAndrew Gregory
systemd added support for b+, c+, p+, and L+ in 2e78fa79 and 1554afae to remove the target path if it already exists.
2014-08-13tmpfiles: fix relabel to run restorecon before chown and chmodWilliam Hubbs
2014-08-13tmpfiles: Move relabelling before any other calls for device nodesJason Zaman
Device nodes are normally never device_t so this type does not have many permissions. After the mknod, the device should have its label corrected before any other operations (like chmod).
2014-08-07tmpfiles.sh: do not use installJason Zaman
install is in /usr which causes problems if /usr is not mounted. Instead, checkpath and "mkdir -p" can do everything required and are both available before /usr is mounted. Since checkpath also handles selinux labels correctly, _restorecon after is not required. X-Gentoo-Bug: 503408 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=503408
2014-07-16tmpfiles: set the proper SELinux contextJason Zaman
Restore the label on the created file / dir based on the policy fcontexts. X-Gentoo-Bug: 516956 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=516956
2014-07-10Style FixesWilliam Hubbs
2014-07-10cgroups: only run cgroup setup when starting a serviceAlexander V Vershilov
Status call should not set limits as it requires root permissions, also this is not safe, as current process may reach limitation. Solution is to set limits and move process to service cgroup only on start. X-GENTOO-BUG: 500364 X-GENTOO-BUG-URL: https://bugs.gentoo.org/show_bug.cgi?id=500364
2014-06-20tmpfiles.sh: fix comment processingWilliam Hubbs
If you happened to format a comment with no white space after the '#', it was not being processed. Reported-by: consus@gmx.com X-Gentoo-Bug: 511804 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=511804
2014-06-20sh/tmpfiles.sh: license under 2-clause BSDRobin H. Johnson
As the author of our tmpfiles.sh script, I hereby license it under 2-clause BSD, like the rest of openrc. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2014-03-27tmpfiles: add support for --boot optionAndrew Gregory
For compatibility with systemd-tmpfiles. Fixes #17 Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-03-27tmpfiles: ignore all files starting with systemd-Andrew Gregory
systemd recently moved creation of /run/nologin to systemd-nologin.conf Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2014-01-18init-Linux.sh: do not mount /run with nosuidWilliam Hubbs
This is so that we will be consistent with the systemd spec forr the /run directory mentioned in this wiki article: http://www.freedesktop.org/wiki/Software/systemd/InitrdInterface/
2014-01-11Merge init-common-post code into BSD init scriptWilliam Hubbs
This code is no longer part of the initialization script for Linux, so we can move it into the init script for *BSD which is the only place it is used.
2013-12-29Rename runscript to openrc-runWilliam Hubbs
This was requested by Debian, because the minicom software, which is available on Debian and other distros, has a binary named runscript. We are keeping a backward compatibility symlink for now, but this allows Debian or any other distro to safely remove the symlink. X-Gentoo-Bug: 494220 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=494220
2013-12-12Rename the rc binary to openrcWilliam Hubbs
Debian requested this rename due to the "rc" binary conflicting with the "rc" binary from the plan 9 shell. We also add a deprecation warning to the binary when it is run as rc to encourage users to switch to openrc instead. X-Gentoo-Bug: 493958 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493958
2013-12-10tmpfiles.sh: small fixesWilliam Hubbs
Change "sort | uniq" to "sort -u". Also, change `...` to $(...). X-Gentoo-Bug: 493736 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=493736
2013-12-02remove type commandWilliam Hubbs
The posix equivalent of the type command is "command -v", so now we use that. Thanks to Jonathan Callen <jcallen@gentoo.org> for informing me wrt the fix.
2013-11-30functions.sh: yesno: (mostly) fix eval logicMike Frysinger
We need to quote the expansion. X-Gentoo-Bug: 475032 X-Gentoo-Bug: https://bugs.gentoo.org/475032 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2013-10-31Fix the service-level rc_verbose settingWilliam Hubbs
This commit fixes the rc_verbose setting so that it is honored if it is set for an individual service. Thanks to whissi@whissi.de for the original patch; this one is slightly modified to be more posix. X-Gentoo-Bug: 489358 X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=489358
2013-09-27fix cgroup_cleanup functionWilliam Hubbs
The yesno test for rc_cgroup_cleanup belongs at the point where this function is called from runscript, not in the function itself. X-Gentoo-Bug: 486210 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=486210
2013-08-13Remove gentoo's net.* scriptsWilliam Hubbs
It has been determined that it will be best for gentoo's net.* scripts to be in a separate package to allow independent development. This package will be called netifrc and maintained by Gentoo.
2013-07-27tmpfiles: do not signal an error if device nodes already existDirk Sondermann
X-Gentoo-Bug: 478336 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=478336
2013-07-25rc-cgroup: make sure the tasks file exists before adding the pidWilliam Hubbs
2013-07-25tmpfiles: add --prefix and --exclude-prefix optionsWilliam Hubbs
2013-07-23tmpfiles: make b and c commands set ownership and permissionsWilliam Hubbs
The b and c commands in tmpfiles.sh were not setting ownership and permissions for the device nodes.
2013-07-16typo fixHank Leininger
X-Gentoo-Bug: 477006 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477006
2013-07-05cgroups: change '$$' to 0 for consistencyWilliam Hubbs
2013-07-05Merge branch 'cgroup.systemd'William Hubbs
Conflicts: sh/rc-cgroup.sh.in
2013-07-01Put a service on into a top hierarchy of each cgroupAlexander V Vershilov
This change will fix unwanted cgroup inheriting from user cgroups, and fixes issues with systemd cgroup tracking by logind. However this fix can lead to incorrect work for some user cgroup controllers - so more advanced solution, that coveres such cases will be created later. Thanks to Fabio Erculiani (lxnay) for testing and general idea.
2013-06-25cgroups: add support for systemd cgroup hierarchyWilliam Hubbs
The systemd cgroup hierarchy support is being added so we can run logind outside of systemd. This is needed because software that was using consolekit is now migrating to logind. We do not create this hierarchy, we just add services to it if it exists.
2013-06-16Fix quoting in cgroup-release-agentAlexander V Vershilov
2013-06-16cgroups: hide messages about non-existent processesAlexander V Vershilov
2013-05-25runscript.sh: run cgroup_cleanup automatically after stopWilliam Hubbs
2013-05-25rc_cgroup.sh: fix typoAlexander V Vershilov
This fixes an incorrect variable assignment in cgroup_get_pids
2013-05-05fix setfont detection in early startup on LinuxWilliam Hubbs
Most of the time, setfont is an external command (part of the kbd package), but it can also be a builtin if busybox is being used. This corrects the test in early startup to work for both cases. I would like to thank Steve L. for pointing this out.
2013-04-25add cgroup cleanup supportAlexander Vershilov
This adds the ability to kill all processes within a service's cgroup when that service is stopped or restarted.
2013-04-03migrate-to-run: fix test for successful migrationWilliam Hubbs
This script originally tested the file system type for the source location of the data we were migrating to determine if the migration was complete. Now we test the destination, and if the softlevel file is there the migration was successful. Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com>
2013-03-12Make fuser command time outWilliam Hubbs
This avoids situations in which fuser hangs because of open files on remote file systems when the remote system goes down. I have also passed this bug on to the maintainers of psmisc since it should really be fixed in fuser. This is based on a patch submitted by evermind@tuxfamily.org Reported-by: evermind@tuxfamily.org X-Gentoo-Bug: 455458 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=455458
2013-03-11tmpfiles: add support for the new X line typeWilliam Hubbs
tmpfiles now has a new line type, X, which is similar to the x line type used by the cleanup function. This is not supported yet by OpenRc, because we do not have the cleanup function in tmpfiles.sh, so I have added a dummy procedure for it so we don't get complaints about this line type. Reported-by: mgorny@gentoo.org X-Gentoo-Bug: 460880 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460880
2013-02-23include BINDIR and SBINDIR in the sanitized PATHAndrew Gregory
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-23Fix shebangs in services to point to the correct location of runscriptAndrew Gregory
SBINDIR and BINDIR can be set independently of PREFIX. This fixes broken shebangs in service files when SBINDIR is set to something other than PREFIX/sbin Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-19cgroups: major update to cgroups supportWilliam Hubbs
This reworks cgroups support so we have one variable in rc.conf for each controller instead of each setting. Also we add support for all of the possible cgroup controllers. I would like to thank Alexander Vershilov for his help with testing and reworking this code.
2013-02-19cgroups: fix shebang line in rc-cgroup.shWilliam Hubbs
2013-02-16make init.sh and init-early.sh honor SYSCONFDIRAndrew Gregory
Fixes hardcoded paths that break when built with SYSCONFDIR set to anything other than /etc/ Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2013-02-16consolefont: use setfont to save the current fontAndrew Gregory
Using setfont directly to save the font prevents breakage when a distro stores consolefonts in a location other than /usr/share/consolefonts such as Arch which stores them in /usr/share/kbd/consolefonts Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 07:30:30 +0000