aboutsummaryrefslogtreecommitdiff
path: root/runlevels
AgeCommit message (Collapse)Author
2016-05-12runlevels/Makefile: add support for runlevel ‘nonetwork’Anthony G. Basile
Traditional System V reserves runlevel 2 for multiuser with no networking. We add support for this which is already defined in the inittab as l2:2:wait:/sbin/rc nonetwork X-Gentoo-Bug: 533828 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=533828 Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
2015-04-20Add binfmt service to sysinit runlevelWilliam Hubbs
This makes binfmt processing behave like tmpfiles processing which follows the same specification as systemd. This fixes #48. X-Gentoo-Bug: 545162 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=545162
2013-08-13Remove gentoo's net.* scriptsWilliam Hubbs
It has been determined that it will be best for gentoo's net.* scripts to be in a separate package to allow independent development. This package will be called netifrc and maintained by Gentoo.
2013-07-25Introduce the tmpfiles.dev serviceWilliam Hubbs
This service handles setting up the tmpfiles entries for the /dev directory for Linux systems which needs to be run in the sysinit runlevel.
2013-04-08create loopback serviceWilliam Hubbs
The loopback service handles the basic settings for the loopback interface, regardless of the network manager you are using.
2013-02-16disable default -prefix services if MKPREFIX = yesAndrew Gregory
Certain services were not being enabled by default if PREFIX was set. This appears to have been intended for Gentoo Prefix systems which are indicated by MKPREFIX not PREFIX. Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2012-10-31Tmpfiles: create and delete entries once in the boot runlevel.William Hubbs
Initially, we were creating tmpfiles entries in the sysinit runlevel and again in the boot runlevel. Systemd runs the --create and --remove options in one service called systemd-tmpfiles-setup after the local file systems are mounted. Now we have a service called tmpfiles.setup which emulates this. This also closes the bug mentioned below, since we were originally writing to files that were on read-only file systems and that were not available. Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 439012 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
2012-10-05Fix default runlevel symlink pathsAndrew Gregory
runlevels/Makefile currently uses ${PREFIX} when creating the initial runlevel symlinks, but the init files are installed to ${INITDIR}, which results in broken symlinks if ${SYSCONFDIR} is set to something other than ${PREFIX}/etc Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
2012-09-26tmpfiles.d init.d scriptsRobin H. Johnson
Now that the tmpfiles.d code is more tested, actually call it from init.d. It assumes that /run is already available when it runs. Please note it runs TWICE. - During sysinit, ideally just after /dev/shm is created, but before udev has started. After udev is also acceptable, but not ideal. - During boot, ideally just after localmount has completed. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26runlevels: Include sysfs in the sysinit level.Robin H. Johnson
net.* and module loading require sysfs now, and if udev is not in use, it is not always loaded early enough, esp for net.lo. Force it to come up during sysinit instead. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-07-26Bring Back prefix supportWilliam Hubbs
We now have a team member who is interested in OpenRC on prefix, so I am bringing it back to the main tree.
2012-07-10fix the upstream default network stackWilliam Hubbs
The OpenRC upstream default network stack was changed, but there was no reason to change it. Now since we have the MKNET build switch, it is easy for the gentoo ebuild to install oldnet by default. The upstream default is newnet.
2012-07-10add the MKNET variable to select a network stackWilliam Hubbs
The MKNET variable can be used to select the network stack you want to build and install with OpenRC. The current default is the gentoo "oldnet" stack. If you want to install the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-09Revert "add the appropriate network scripts to the boot runlevel"William Hubbs
This reverts commit add965706a3a239a7eb6750d6fc14090eb70dd12. This commit was broken so I need to revert it.
2012-07-09fix typoWilliam Hubbs
2012-07-08add the appropriate network scripts to the boot runlevelWilliam Hubbs
2012-07-08Revert "Deprecate the network and staticroute scripts"William Hubbs
This reverts commit 5994e55937cbbb71b1c22ad829b77a1bcd8c3793. There are situations where these scripts can be useful, so I am bringing them back. Also, I want to start discussions about simplifying the OpenRC network stack.
2012-02-21Remove prefix supportWilliam Hubbs
I spoke with the prefix team sometime back and was told that they do not have an interest in using OpenRC on prefix systems.
2012-02-13Improve swap handlingWilliam Hubbs
Modify the swap script so it starts before and stops after localmount. Also, on linux, this script should skip mounting swap on loopback. Add a swapfiles script which runs after localmount and is designed to activate additional swap space which could not be activated before localmount was run. This includes loopback swap on linux and swapfiles which are on local file systems that were not mounted when swap was activated initially. The start code does reactivate swap that is already active, but this is not an error condition. Reported-by: Giampaolo Tomassoni <giampaolo@tomassoni.biz> X-Gentoo-Bug: 401003 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401003
2011-12-03Integrate migrate-run into bootmiscWilliam Hubbs
The migrate-run service was hanging when parallel startup was enabled because of its dependencies. This integrates the logic for this service into bootmisc, which will avoid the issues with parallel startup. I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his input on this patch
2011-11-23Migrate /var/lock and /var/run to /run for linux systemsWilliam Hubbs
2011-11-16Deprecate the network and staticroute scriptsWilliam Hubbs
These scripts are not supported, and they have several major design issues such as not being able to stop, start or allow a dependency on a single interface.
2011-10-20further clean up OS differences in makefilesMike Frysinger
No need for if() logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-19Make variable references in Makefiles consistentWilliam Hubbs
Some variable references were written as $(foo), but the majority were written as ${foo}. This commit changes all of the variable references to using braces.
2011-10-18consolodate MakefilesWilliam Hubbs
The tree contained many operating system specific Makefiles which were being included in other Makefiles. This commit removes those and adds the code to the makefiles which included them using make's conditional processing. X-Gentoo-Bug: 387441 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2009-10-16Add staticroute to the boot runlevelRoy Marples
2009-04-30Go back to gitRoy Marples
2009-04-16Add a new init script - networkRoy Marples
This simply assigns static addresses and an optional default route. It's possible to add external commands as well, so to create a bonded interface. Hopefully we can add a few examples to satisfy most of the old net.lo, which is no longer installed into boot by default.
2008-12-04make ignore now configures the sv:ignore property.Roy Marples
2008-11-12Punt halt init script. sysvinit should install it. See Gentoo bug #246502 on ↵Roy Marples
how to handle this.
2008-11-04Move romount to mount-ro and use the umount -r option as it's more reliable ↵Roy Marples
for / --bind mounts, Gentoo #239922. Thanks to Duncan.
2008-11-03Add a new shutdown runlevel, Gentoo #224537.Roy Marples
Split halt.sh into halt, killprocs, romount and savecache services. The reboot runlevel is removed but mapped to shutdown. The halt script should be moved to the sysvinit package.
2008-10-10sysinit is now a real runlevel that handles things like udev, dmesg andRoy Marples
mounting various bits in /dev and /sys. init.sh JUST mounts /lib/rc/init.d (and /proc for Linux systems) To make development of this easier we now return an empty RC_STRINGLIST instead of a NULL for empty things. If you don't have a udev init script installed, don't reboot your box OR roll back to an older OpenRC version.
2008-05-12We should add devdb to boot.Roy Marples
2008-03-27Tweak install of runlevels.Roy Marples
2008-03-27Split terminal encoding out.Roy Marples
2008-03-26Check the right dir for installed scripts.Roy Marples
2008-03-25SYSCONFDIR should already be prefixed.Roy Marples
2008-03-25Install swap-blk on NetBSD.Roy Marples
2008-03-25Rework our folder structure so that we don't have OS specific dirs, making ↵Roy Marples
it easier to share init and conf files per OS.
2008-03-24add check/test rulesMike Frysinger
2008-03-05Add tunable SYSCONFDIRRoy Marples
2008-03-04mixer doesn't work on all platforms.Roy Marples
2008-03-03Not all fbsd systems support powerd.Roy Marples
2008-03-03Add a gitignore make target.Roy Marples
2008-03-02Ensure that our scripts call prefixed runscript.Roy Marples
2008-03-01Fix installing into PREFIX.Roy Marples
2008-03-01BSD's now mount swap block devices early incase fsck needs it.Roy Marples
2008-01-31Remove the over-engineered checkfs and checkroot scripts and replace with ↵Roy Marples
simple fsck, root and mtab scripts. Update dependencies accordingly.
2008-01-11These are FreeBSD specificRoy Marples