Age | Commit message (Collapse) | Author |
|
|
|
Reported-by: Alon Bar-Lev <alon.barlev@gmail.com>
x-Gentoo-Bug: 364907
x-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?364907
|
|
Convert the style:
var=$((${var} + 1))
to:
: $(( var += 1 ))
The latter is easier to read imo.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Rework the makefiles to use pattern rules instead of suffix rules.
This is the preferred way to write implicit rules according to the gnu
make manual.
|
|
X-Gentoo-Bug: 384029
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=384029
|
|
No need for if() logic.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Some variable references were written as $(foo), but the majority were
written as ${foo}. This commit changes all of the variable references
to using braces.
|
|
The tree contained many operating system specific Makefiles which were
being included in other Makefiles. This commit removes those and adds
the code to the makefiles which included them using make's conditional
processing.
X-Gentoo-Bug: 387441
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
|
|
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
Make sure the VLAN interfaces as well as its rules will be removed prior
to the actual/parent interface.
The VLAN configs are gone in vlan_post_stop() already so we have to use
vlan_pre_stop() instead.
Reported-by: Bernd Bednarz <bernd.bednarz@avira.com>
X-Gentoo-Bug: 380603
X-Gentoo-Bug-URL: https://bugs.gentoo.org/380603
|
|
Make sure the RPDB rules will be removed.
|
|
iproute2_post_stop() does now check if the network interface still exist.
Reported-by: Yun Zheng Hu <hu@fox-it.com>
X-Gentoo-Bug: 379575
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379575
|
|
ethtool.sh didn't reset the Internal Field Seperator (IFS) properly.
It now does, by storing the old IFS to OIFS, which will be used later
in the for loop.
It also fixes the "ethtool_ring_<if>" option.
Reported-by: Alois Schmid <alois.schmid@gmx.de>
X-Gentoo-Bug: 368525
X-Gentoo-Bug-URL: https://bugs.gentoo.org/368525
|
|
as OpenRC can be used on other distributions as well.
|
|
ARP replies may/do contain two MAC addresses when using iputils's
arping so we have to use the first one because it's always the "From"
address - which is what we want.
Thanks to Stefan Knoblich <s.knoblich@axsentis.de> for the fixed pattern.
Reported-by: cl@exomail.to
X-Gentoo-Bug: 379181
X-Gentoo-Bug-URL: https://bugs.gentoo.org/379181
|
|
|
|
This was originally to fix the fact that our code did not handle certain
orders of arguments in conversion, but it was easier to rewrite the
entire argument handling to support more options at the same time.
Now supports all options documented in the ip manpage, including the
IPv6-specific options that must be passed after the interface argument.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Reported-by: Tony Vroon <chainsaw@gentoo.org>
X-Gentoo-Bug: 366905
X-Gentoo-Bug-URL: https://bugs.gentoo.org/366905
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We need to bring the link up ourselves after we've properly configured
the device. The common code tries to bring the link up itself, but it
does so before things are configured, and so it ends up failing.
When shutting down, we need to wait for the kernel to finish destroying
the interface. Otherwise, when doing a restart, openrc is quick enough
to tell the kernel to destroy things, but then start trying to bring it
back up before the kernel has finished.
X-Gentoo-Bug: 367467
X-Gentoo-Bug-URL: http://bugs.gentoo.org/367467
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
|
|
X-Gentoo-Bug: 366653
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=366653
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
|
|
Quite a bit of work happened in baselayout-1 on the ccwgroup module, but
seems it didn't make it into openrc. So forward port all the existing
code so we can work with more than just qeth and layer2 options.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
This updates the udhcpc support to use busybox's udhcpc instead of the
stand alone version.
I would like to thank jackieku <kjackie@gmail.com> for assisting with
this update.
X-Gentoo-Bug: 205286
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=205286
|
|
- Add support for a global plug_timeout setting to match the
documentation.
- Update the documentation to also show per-interface configuration.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
This was causing the ethtool interface to not work.
X-Gentoo-Bug: 360481
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=360481
|
|
X-Gentoo-Bug: 360367
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=360367
|
|
X-Gentoo-Bug: 359311
X-Gentoo-Bug-URL: http://bugs.gentoo.org/359311
Reported-by: Raffaello D. Di Napoli <fastijum@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Implement a consistent interface for changing ethtool parameters, as
suggested in bug 195479. All variable names are based on the long option
to ethtool to set each group of parameters. Multiple entries seperated
by newlines are permitted for variable values.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 195479
|
|
Tunnel modes ipip6 and ip6ip6 require an explicit family selection for
the ip tunnel call.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
X-Gentoo-Bug: 347657
|
|
This replaces the vlan setup code that previously used the old vconfig
binary with a new implementation using the iproute2 interface.
vconfig does not handle many of the newer setups. No automatic migration
path is provided, as altering the configuration is non-trivial.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Written-by: Guillaume Castagnino <casta@xwing.info>
X-Gentoo-Bug: 346365
|
|
X-Gentoo-Bug: 354511
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=354511
|
|
X-Gentoo-Bug: 353124
X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=353124
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
output on addresses and routes.
|
|
|
|
|
|
Specifically document how to handle the case of explicitly starting a
bridge and then dynamically adding interfaces to it.
brctl_br0=''
bridge_add_eth0='br0'
|
|
This can be used for multi-homed connections and other advanced routing
in Linux. See the documentation links for more information about doing
this in linux.
The code was a originally pure addon into the conf.d/net files, written
in mid-2004 for doing multi-homing between two internet connections. I
have finally cleaned this up and integrated it. Thanks to Jonathan Kwan
for giving me the original impetus to develop this for Gentoo (it was
his dual internet connections...).
In the intervening years, it was a example of postup/postdown in the
net.example file, however that suffered from a few corner case issues.
If you were using the code from net.example, please see the updated
section 'Advanced Routing' on syntax, and drop your old function blocks.
Additionally, note that the rules added are now directly saved for
removal when the interface is taken down.
|
|
- Use sysfs to read bridge information from the system instead of
parsing the brctl outputs.
- Allow setting of all bridge configuration parameters using new sysfs
methods, modelled after bonding configuration. Also works for per-port
bridge interface parameters.
- Document pre-starting an empty bridge for dynamic add.
- Check for interface existence before adding to bridge.
- Should fix bug #293046, #309185.
|
|
DBus is up.
|
|
This reverts commit 4ea75dd1d6c1e475f103f027fd05861d237add4d.
This caused a regression, see bug #345795.
Ifplugd is only designed to support wireless interfaces that use the
older wireless extentions.
|
|
mode has to be configure before any other arguements are passed. Thanks
Ed Wildgoose <gentoo@wildgooses.com> for patch.
|
|
this fixes bug #335494.
|
|
This reverts commit 1a188f8f725186b2c2d6d7c67e79c2ff5ea9d05e.
This revert fixes bug #334663.
|
|
This fixes bug 327059, thanks to Jonathan for reporting this and for the patch.
|
|
Do not stop wpa_supplicant or wpa_cli if they are in the background.
Thanks to Slava Gorbunov for the patch.
|
|
|
|
|
|
This makes it possible for the "ip" program in iproute2 to be installed
in /sbin or /bin.
|