aboutsummaryrefslogtreecommitdiff
path: root/init.d
AgeCommit message (Collapse)Author
2012-10-22oldnet: make the default carrier timeout 0William Hubbs
Some types of interfaces do not have a carrier, so it doesn't make sense to automatically wait for one. Reported-by: <rose@rz.uni-potsdam.de> X-Gentoo-Bug: 438970 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438970
2012-10-19tmfiles: change need dev to use dev.William Hubbs
This is being changed to use for the reason I stated in the previous commit. There is no guarantee that someone is using a device manager.
2012-10-19devfs: Remove references to specific device managersWilliam Hubbs
There were references in the devfs script to mdev, udev and udev-mount. These all provide the virtuals dev and dev-mount; that is how we should refer to them. I believe in the discussion I had with Tony and Robin about this, we were going to change the "use" line to "need". However, after thinking that over, I'm not comfortable doing so because someone could be running a static /dev with no device manager. Reported-by: <tokiclover@gmail.com> X-Gentoo-Bug: 438932 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438932
2012-10-19Fix bashism in tmpfilesd scriptsWilliam Hubbs
Reported-by: <pesa@gentoo.org>
2012-10-16Oldnet: the loopback interface does not need sysfsWilliam Hubbs
2012-10-16Migrate /var/run and /var/lock to symlinksWilliam Hubbs
Now that we have full support for tmpfiles.d in OpenRC, we can migrate /var/run and /var/lock to symbolic links to /run and /run/lock respectively.
2012-10-16Add Vim modelineChristian Ruppert
2012-10-02sysfs: add -lxc keywordWilliam Hubbs
The sysfs filesystem should not be mounted inside a linux container. Reported-by: permeakra@gmail.com X-Gentoo-Bug: 425790 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=425790
2012-10-02dmesg should not run in a linux containerWilliam Hubbs
reported-by: <Walter@pratyeka.org> X-Gentoo-Bug: 436266 X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=436266
2012-09-26tmpfiles.d init.d scriptsRobin H. Johnson
Now that the tmpfiles.d code is more tested, actually call it from init.d. It assumes that /run is already available when it runs. Please note it runs TWICE. - During sysinit, ideally just after /dev/shm is created, but before udev has started. After udev is also acceptable, but not ideal. - During boot, ideally just after localmount has completed. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26init.d/devfs: Run after (u)dev-mount, before udev/mdevRobin H. Johnson
Using the new dev-mount virtual, with udev-mount included until new udev version is rolled out, we run devfs earlier now, before udev/mdev. It only needs (u)dev-mount before it, so that /dev is mounted. This opens the way for tmpfiles.d, which needs to be sandwiched in the middle. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26Add -lxc keyword to urandom scriptWilliam Hubbs
Urandom should not run in lxc containers since it is provided by the host. Reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 436270 X-Gentoo-Bug-URL: http://bugs.gentoo.org/436270
2012-09-15netmount: do not handle NFS mountsWilliam Hubbs
Since nfs and nfs4 file systems require extra daemons to be running on the client to function properly, netmount should not try to handle these file systems. Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 427996 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
2012-09-10netmount: add checks for rpc.idmapd for nfs4 filesystemsWilliam Hubbs
Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 427996 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
2012-09-09dmesg: add -prefix keywordWilliam Hubbs
Dmesg should not run on prefix systems. Reported-by: <heroxbd@gentoo.org>
2012-09-07savecache: make sure $RC_LIBEXECDIR is writableWilliam Hubbs
This is needed in case of a read-only root filesystem such as a diskless client. Reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 430382 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=430382
2012-08-25do not provide a virtual for the loopbackWilliam Hubbs
The loopback interface is active on all systems, so there is no need to provide a virtual for it.
2012-08-24newnet: provide net if configuring more than the loopback interfaceWilliam Hubbs
2012-08-18Use do_umount's return value instead of eoutdent's.Christian Ruppert
2012-08-17swapfiles: make sure /proc/swaps existsWilliam Hubbs
If CONFIG_SWAP is turned off in the kernel, this file may not exist. In that case, we should not try to read from it. reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 430378 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=430378
2012-07-26Bring Back prefix supportWilliam Hubbs
We now have a team member who is interested in OpenRC on prefix, so I am bringing it back to the main tree.
2012-07-15remove unnecessary header lineWilliam Hubbs
2012-07-15small style changes to encswapWilliam Hubbs
This drops some unnecessary continue statements and changes command command substitution to use $() instead of ``.
2012-07-15Fix savecore init script to execute after dumpon, but before encswapRichard Yao
This ensures that any kernel crash dumps are available when savecore runs. It also prevents encswap from corrupting them.
2012-07-15Import encswap init script from FreeBSDRichard Yao
The FreeBSD encswap init script has been adapted to function in OpenRC. It should function identically to its FreeBSD counterpart.
2012-07-10fix the upstream default network stackWilliam Hubbs
The OpenRC upstream default network stack was changed, but there was no reason to change it. Now since we have the MKNET build switch, it is easy for the gentoo ebuild to install oldnet by default. The upstream default is newnet.
2012-07-10add the MKNET variable to select a network stackWilliam Hubbs
The MKNET variable can be used to select the network stack you want to build and install with OpenRC. The current default is the gentoo "oldnet" stack. If you want to install the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-08Revert "Deprecate the network and staticroute scripts"William Hubbs
This reverts commit 5994e55937cbbb71b1c22ad829b77a1bcd8c3793. There are situations where these scripts can be useful, so I am bringing them back. Also, I want to start discussions about simplifying the OpenRC network stack.
2012-07-03cgroups: allow users to turn off creation of controller cgroupsWilliam Hubbs
This adds a switch to not create the one-cgroup-per-controller setup of cgroups. reported-by: davidweb@klaftenegger.de X-Gentoo-Bug: 423317 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=423317
2012-05-27termencoding should not run on lxcWilliam Hubbs
reported-by: Alexey Shvetsov <alexxy@gentoo.org>
2012-05-13do not umount /usr on linux systemsWilliam Hubbs
We can't really umount /usr on linux systems because /usr is a special case if it is a separate filesystem which is handled by an initramfs. reported-by: tamiko+GENTOO@kyomu.43-1.org X-Gentoo-Bug: 415523 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=415523
2012-05-02Do not try to remount /run read onlyAlexey Shvetsov
On a diskless system, doing this causes the system to lock up during shutdown.
2012-04-16init.d/procfs: posix compatibility fixSergei Trofimovich
I've noticed in at boot: # /etc/init.d/procfs restart procfs | * WARNING: you are stopping a boot service procfs |[: 308: unexpected operator Which calls $ /bin/dash -c '[ "$RC_SYS" == "OPENVZ" ] && echo "ovz" || echo "nope"' [: 1: unexpected operator nope Fixed by using '='. X-Gentoo-Bug: 412237 x-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=412237
2012-04-03network scripts need sysfs on linux systemsWilliam Hubbs
Adjust the previous commit so that on linux systems the network scripts need sysfs.
2012-03-29init.d/fsck: only check local file systemsWilliam Hubbs
On linux systems, fsck was not taking into account which filesystems were local or remote. This commit adds the -t option, with an appropriate value, to the fsck call so that remote file systems are not checked. reported-by: Vladimir Berezhnoy <non7top@gmail.com> X-Gentoo-Bug: 408363 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=408363
2012-03-26Add -lxc keyword to sysctl script for linux systemsWilliam Hubbs
Kernel parameters should not be set from inside a lxc guest. Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com>
2012-03-25localmount: Only unmount local filesystems if we are shutting downWilliam Hubbs
Make the stop function in localmount only unmount file systems when the system is going down. reported-by: Alexey Prokopchuk <alexpro@homelan.lg.ua> X-Gentoo-Bug: 407167 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=407167
2012-03-24sysctl: use @SYSCONFDIR@ in the scripts instead of hard coding /etcWilliam Hubbs
2012-03-24Allow files in sysctl.d to override sysctl.confWilliam Hubbs
reported-by: Peter Gantner (a.k.a. nephros) <gentoo@nephros.org> X-Gentoo-Bug: 406631 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=406631
2012-03-24init.d/sysctl.Linux: do not use sysctl -qDiego Elio Pettenò
The -q option is not implemented by BusyBox, so instead of using that, make it so that the standard error is caught, but standard output is thrown away. Note: the ordered behaviour of redirection is part of POSIX so we should be on the safe side with this change, as first we duplicate the output descriptor to be used as stderr, then we change the output descriptor to point to NULL. Signed-off-by: Diego Elio Pettenò <flameeyes@flameeyes.eu>
2012-02-21Remove prefix supportWilliam Hubbs
I spoke with the prefix team sometime back and was told that they do not have an interest in using OpenRC on prefix systems.
2012-02-20Revert "Revert "swap: go back to using swapon for Linux systems""William Hubbs
This reverts commit 06d67017850e106f14d8948003027612253b143a. After researching this further, we do need this commit. The other issue is a bug in fstabinfo which will also need to be fixed.
2012-02-20update ignore patternsWilliam Hubbs
2012-02-20Revert "swap: go back to using swapon for Linux systems"William Hubbs
This reverts commit 297720787f914ca34f2d04c66980c18c57700865. robbat2 tells me there is a better way to fix this.
2012-02-20swap: go back to using swapon for Linux systemsWilliam Hubbs
There are several reasons for going back to this: - fstabinfo doesn't work with labels in fstab - when a device is passed to swapon individually, the swap priority from fstab is not honored. - We also add the -e option to only activate available swap devices. reported-by: Duncan <1i5t5.duncan@cox.net> X-Gentoo-Bug: 405021 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=405021
2012-02-18net: add deprecation warning for old style net dependency variablesWilliam Hubbs
2012-02-18Fix meaning of "provide net"William Hubbs
I was informed that "provide net" should mean that there is network communication outside the local computer. In this case, the loopback interface can't "provide net", but there needs to be a way for other processes to know that the loopback interface is active. To this end, this commit makes the loopback "provide lo" and all other interfaces "provide net".
2012-02-18hwclock: set the hardware clock on shutdownWilliam Hubbs
Previously, the default on linux systems was to not set the hardware clock to match the system clock during shutdown. This changes that default to be consistent with *bsd and swclock.
2012-02-17hwclock: Clarify documentationWilliam Hubbs
The clock_hctosys and clock_systohc settings really do not have anything to do with running an ntp daemon, so remove that reference from the documentation. Reported-by: Milos Ivanovic <milosivanovic@orcon.net.nz> X-Gentoo-Bug: 401433 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401433
2012-02-16Enable binfmt_misc for openvz containersWilliam Hubbs
Reported-by: Daniel Robbins <drobbins@funtoo.org> X-Gentoo-Bug: 401875 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=401875