Age | Commit message (Collapse) | Author |
|
The posix equivalent of the type command is "command -v", so now we use
that. Thanks to Jonathan Callen <jcallen@gentoo.org> for informing me
wrt the fix.
|
|
X-Gentoo-Bug: 489370
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
|
|
X-Gentoo-Bug: 489370
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=489370
|
|
The localmount and mount-ro scripts were flushing pending disk writes by
calling sync twice in succession. This is no longer necessary; see the
bug report and blog post for reasons we were still doing this.
Reported-by: Patrick Lauer <patrick@gentoo.org>
X-Gentoo-Bug: 487382
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487382
|
|
Fix relevant an issue mentioned by Toralf Förster.
X-Gentoo-Bug: 481096.
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=481096
|
|
Netmount should not run on lxc, thanks to Mark van Dijk <funtoo@internecto.net>.
|
|
|
|
Remove net.lo* from the ignore pattern since these scripts are no longer
part of OpenRC and add loopback and tmpfiles.dev.
|
|
It has been determined that it will be best for gentoo's net.* scripts
to be in a separate package to allow independent development.
This package will be called netifrc and maintained by Gentoo.
|
|
|
|
Devfs is not needed for LXC, as LXC mounts all required fs on
it's own. Reported by specing.
|
|
This is handled in the swap script, so it should not be done here as
well.
X-Gentoo-Bug: 477534
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=477534
|
|
This service handles setting up the tmpfiles entries for the /dev
directory for Linux systems which needs to be run in the sysinit
runlevel.
|
|
In the 3.10 kernel, EFI variables are now provided by a dedicated
filesystem that needs to be mounted.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
X-Gentoo-Bug: 467158
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=467158
|
|
The loopback service handles the basic settings for the loopback
interface, regardless of the network manager you are using.
|
|
On Linux, this was not an issue, but we may have been attempting to
mount network file systems twice on *bsd.
Reported-by: powerman-asdf@yandex.ru
x-Gentoo-Bug: 462210
x-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=462210
|
|
Free BSD's ifconfig outputs a netmask in the form 0xffffff00, which
was translating to 0xff.0xff.0xff.0x00,. Now we convert this to decimal
numbers before we convert it to cidr notation.
Reported-by: 4glitch@gmail.com
X-Gentoo-Bug: 460268
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=460268
|
|
Reported-by: 4glitch@gmail.com
X-Gentoo-Bug: 459694
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=459694
|
|
SBINDIR and BINDIR can be set independently of PREFIX. This fixes
broken shebangs in service files when SBINDIR is set to something other
than PREFIX/sbin
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
This makes binfmt.d consistent with tmpfiles.d and systemd which uses
hard coded paths for both.
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Using setfont directly to save the font prevents breakage
when a distro stores consolefonts in a location other than
/usr/share/consolefonts such as Arch which stores them in
/usr/share/kbd/consolefonts
Signed-off-by: Andrew Gregory <andrew.gregory.8@gmail.com>
|
|
Reported-by: walter@pratyeka.org
X-Gentoo-Bug: 454338
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=454338
|
|
The loadkeys man page states that if you don't pass a filename loadkeys
will read from stdin. However, this is not correct, so we now pass "-"
as the filename to explicitly request stdin.
Reported-by: andi@grois.info
X-Gentoo-Bug: 457524
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=457524
|
|
Reported-by: reuben.m@gmail.com
X-Gentoo-Bug: 456998
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=456998
|
|
We were telling users that setting shutdown_network=YES would shut down
the network interfaces during shutdown, but this was exactly the
opposite of what we were doing. The default was YES, which was keeping
the interfaces active.
This keeps the default behavior, but renames the setting to keep_network
which more accurately describes its function, and instructs users to set
it to NO if they want the network interfaces to go down.
|
|
This setting, already in use in newnet, allows the user to control
whether network interfaces are stopped when the system shuts down. By
default, under newnet, they are not, so I am making oldnet have the same
default.
A side-affect of this is that in the default configuration this fixes
bugs like the one below.
Reported-by: jerryfleming2006@gmail.com
X-Gentoo-Bug: 259183
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=259183
|
|
rkhunter thinks OpenRC is a rootkit because of the hidefirstrout
variable. This has been renamed to hideFirstroute in order to get past
rkhunter.
I realize this is not an openrc bug. In this case though I do not have a
problem renaming the variable.
Reported-by: ago@gentoo.org
X-Gentoo-Bug: 339714
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=339714
|
|
Reported-by: vapier@gentoo.org
X-Gentoo-Bug: 453740
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=453740
|
|
The /run directory is a mount point for a tmpfs and should not contain
any files or directories. This cleans out the /run/openrc
symlink and any other files which were incorrectly placed in /run.
Thanks to Ian Stakenvicius for pointing out this solution.
|
|
X-Gentoo-Bug: 442594
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=442594
|
|
X-Gentoo-Bug: 447310
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?d=447310
|
|
For devices that are always connected (e.g. ethernet cards), the current
carrier always wastes time by sleeping for 1 second. This is because the
code sleeps first, then checks for carrier. Invert the order so that we
return quickly for devices already active. For devices which are not yet
up, there shouldn't be any real difference.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Use printf rather than a manual for loop.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
X-Gentoo-Bug: 446556
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=446556
|
|
|
|
Add a test when localmount is started to determine if /usr is mounted
from inside an initramfs for Linux systems. If it is not, we can unmount it when
localmount stops.
On *bsd systems, we always unmount /usr if it is separate.
Reported-by: ryao@gentoo.org
|
|
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
In a pathname expansion, specifically single-character match, the pure
POSIX specification uses '!' as the Negation character where a regular
expression would normally be '^'.
Regular expression: "a[^a]a"
Pathname expansion pattern: "a[!a]a"
Reference:
IEEE Std 1003.1, 2004 Edition
2. Shell Command Language
2.13 Pattern Matching Notation
2.13.1 Patterns Matching a Single Character
> The description of basic regular expression bracket expressions in the
> Base Definitions volume of IEEE Std 1003.1-2001, Section 9.3.5, RE
> Bracket Expression shall also apply to the pattern bracket expression,
> except that the exclamation mark character ( '!' ) shall replace the
> circumflex character ( '^' ) in its role in a "non-matching list" in
> the regular expression notation. A bracket expression starting with an
> unquoted circumflex character produces unspecified results.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
|
|
Initially, we were creating tmpfiles entries in the sysinit runlevel and
again in the boot runlevel. Systemd runs the --create and --remove
options in one service called systemd-tmpfiles-setup after the local
file systems are mounted. Now we have a service called tmpfiles.setup
which emulates this.
This also closes the bug mentioned below, since we were originally
writing to files that were on read-only file systems and that were not
available.
Reported-by: <devurandom@gmx.net>
X-Gentoo-Bug: 439012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
|
|
Reported-by: <mattsch@gmail.com>
X-Gentoo-Bug: 439658
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439658
|
|
Some types of interfaces do not have a carrier, so it doesn't make sense
to automatically wait for one.
Reported-by: <rose@rz.uni-potsdam.de>
X-Gentoo-Bug: 438970
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438970
|
|
This is being changed to use for the reason I stated in the previous
commit. There is no guarantee that someone is using a device manager.
|
|
There were references in the devfs script to mdev, udev and
udev-mount. These all provide the virtuals dev and dev-mount; that is
how we should refer to them.
I believe in the discussion I had with Tony and Robin about this, we
were going to change the "use" line to "need". However, after thinking
that over, I'm not comfortable doing so because someone could be running
a static /dev with no device manager.
Reported-by: <tokiclover@gmail.com>
X-Gentoo-Bug: 438932
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438932
|
|
Reported-by: <pesa@gentoo.org>
|
|
|
|
Now that we have full support for tmpfiles.d in OpenRC, we can migrate
/var/run and /var/lock to symbolic links to /run and /run/lock
respectively.
|