Age | Commit message (Collapse) | Author |
|
Now that we respect the module blacklists, don't print every module we
try to load, because it might not end up loaded due to the blacklist,
and modprobe doesn't consider that a failure.
|
|
|
|
The /etc/init.d/localmount script has a syntax error that causes it to
attempt to mount remote filesystems, causing the boot to fail. The
script appends a "no" to each remote filesystem type, but it should only
be append the "no" to the beginning of the list. This patch fixes
localmount on FreeBSD 12.0. A review of the mount(8) manpage on Ubuntu
12.04 suggests that this patch is correct for Linux, too.
|
|
The openntmpfiles package is designed so that it can be used on systems
independently of whether openrc is used.
|
|
This is related to #103.
|
|
X-Gentoo-Bug: 573760
X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=573760
|
|
X-Gentoo-Bug: 598621
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=598621
|
|
Busybox does not support the 'scope' argument on 'ip address add' or 'ip
route add', this is documented in BUSYBOX.md, but is no longer actually
needed, as the kernel does get it right without manual specification,
and the ifconfig variant already relies on the kernel to get it right.
This is part of #103.
X-Gentoo-Bug: 487208
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487208
|
|
The presence of /sys/firmware/efi is used to indicate that the system
was booted in efi mode.
|
|
|
|
Separate loading the module, if it isn't built in or loaded, from
mounting the file system.
This also makes sure the warning about configuring the module in
/etc/conf.d/modules or building it in is displayed only if it is loaded
successfully.
X-Gentoo-Bug: 595836
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=595836
|
|
|
|
I am removing the separate case for Linux, because we are droppping the
"-e" switch.
|
|
This means that we will honor the modprobe black lists.
X-Gentoo-Bug: 594012
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=594012
|
|
This fixes #85.
|
|
|
|
|
|
This reworks the logic so that the warning about configuring the
binfmt_misc module is only displayed if the module actually has to be
loaded.
|
|
X-Gentoo-Bug: 568162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=568162
|
|
The swapfiles service was basically a copy of the swap service, so this
commit consolidates the functionality into the swap service.
X-Funtoo-Bug-URL: https://bugs.funtoo.org/browse/FL-2523
X-Gentoo-Bug: 568162
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=568162
|
|
The $RC_UNAME "Linux" had been misspelled as "linux".
As a consequence, entries in e.g. /etc/modules-load.d failed to
load any module succesfully under Linux(!)
|
|
This handles comments without a trailing space after the comment
character.
Reported-By: josef64
|
|
|
|
Move list of directories to a local variable and create the fn variable
to use for an individual file name rather than using path.
|
|
|
|
This allows the operating system default hostname to be used if no
hostname is configured.
|
|
|
|
In the hwclock, procfs and sysfs service scripts, we automatically
attempt to load the kernel modules we need before we take any action. We
shouldn't do this, because there are systems which do not use kernel
modules and do not have the kmod package installed.
With this change, we continue to load the modules ourselves, but we warn
the admin that they need to be added to /etc/conf.d/modules or built
into the kernel.
In the future, this automatic loading will be dropped.
X-Gentoo-Bug: 342313
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=342313
|
|
|
|
Add -docker keyword to the same scripts that have -lxc keyword.
|
|
X-Gentoo-Bug: 501364
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=501364
|
|
|
|
|
|
We had separate sysctl scripts for each operating system. However, there
is no need to do this since we can detect the operating system at
runtime with $RC_UNAME.
|
|
This is based on a patch submitted by
Joe Maloney <pkgdemonteam@gmail.com>.
This fixes #91.
|
|
When we use the --utc or --localtime switch, also use --noadjfile if it
is available. This means hwclock will not use a drift file.
X-Gentoo-Bug: 584722
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=584722
|
|
X-Gentoo-Bug: 487084
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=487084
|
|
Fix a typo and do not fail if a path in critical_mounts is not listed as
a critical mount does not get mounted.
|
|
In previous releases, we either treated no mount points as critical or
all of them.
Now both localmount and netmount support a critical_mounts setting. If
mount points listed in this setting fail to mount, localmount and
netmount will fail.
|
|
Before this commit, on Linux, we were always trying to mount file
systems marked with _netdev, even when the previous mount command
failed. Now, we do not run the second mount if the first fails.
X-Gentoo-Bug: 579876
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=579876
|
|
|
|
Netifrc is no longer part of OpenRC, so we shouldn't save its dep tree
as part of savecache.
This should have been removed when netifrc was split out. also, it
might be related to the following bug.
X-Gentoo-Bug: 563720
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=563720
|
|
X-Gentoo-Bug: 572602
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=572602
|
|
X-Gentoo-Bug: 572138
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=572138
|
|
X-Gentoo-Bug: 564008
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=564008
|
|
|
|
In the past, OpenRC was a hybrid of a centralized and file-scope
license/copyright structure.
I followed the instructions from the Software Freedom Law Center [1] to
convert to a Centralized structure where possible, for easier future
maintenance.
[1] https://softwarefreedom.org/resources/2012/ManagingCopyrightInformation.html
|
|
add in parsing of fstab to determine if nfsclient should be automatically
started so that netmount can mount nfs without adding nfsclient
to the default runlevel
This fixes #71.
|
|
X-Gentoo-Bug: 559540
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=559540
|
|
X-Gentoo-Bug: 561204
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=561204
|