aboutsummaryrefslogtreecommitdiff
path: root/init.d
AgeCommit message (Collapse)Author
2012-02-12Fix typo in swap scriptWilliam Hubbs
2012-02-10termencoding: change "need root" to "use root"William Hubbs
This allows root to be removed from the boot runlevel which is needed sometimes when the root fs is mounted read-only. Reported-By: Maxim Kammerer <mk@dee.su> X-Gentoo-Bug: 400921 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400921
2012-02-10root.in: split a long line for readabilityWilliam Hubbs
2012-02-09Remount already mounted filesystems.Piotr Karbowski
This was modified by William Hubbs to use the checkpath helper and to improve readability. Signed-off-by: William Hubbs <williamh@gentoo.org> Signed-off-by: Robin H. Johnson <robbat2@gentoo.org> (tested with genkernel /usr mount changes);
2012-01-30Revert "Net: do not bring down interfaces during shutdown"William Hubbs
This reverts commit 6d5a2d5f9e5c1e3cb4c24dfc0c2ed2c118d8e64c. There are interfaces, such as adsl and ppp interfaces which need to be brought down. Also, the WOL setting is a good case for bringingdown interfaces.
2012-01-28Use "checkpath -W" instead of dir_writable()Christian Ruppert
2012-01-27Cgroups: do not update mtab when mounting control groupsWilliam Hubbs
This is based on a patch submitted by the reporter; however, there was another mount command which needed -n as well so it was added to the patch. Reported-by: Ben Kohler <bkohler@gmail.com> X-Gentoo-Bug: 400967 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400967
2012-01-26cgroups: make sure /sys/fs/cgroup is a mount pointWilliam Hubbs
We need to make sure this directory is a mount point before we add the control groups. Reported-by: Andrej Filipcic <andrej.filipcic@ijs.si> X-Gentoo-Bug: 400903 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=400903
2012-01-26bootmisc: stop deleting /etc/nologinMike Frysinger
Baselayout-1.x used to have a DELAYLOGIN option where it would setup /etc/nologin automatically and then delete it later on. OpenRC did not keep that feature, and during the rewrites, ended up just punting it all the time. This isn't what we intended, so drop the rm. X-Gentoo-Bug: 400837 X-Gentoo-Bug-URL: https://bugs.gentoo.org/400837 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-01-23Cgroups: activate the openrc control group release agentWilliam Hubbs
2012-01-23Cgroups: create openrc control groupWilliam Hubbs
This creates the "openrc" control group with no subsystems attached. The next step will be to add everything openrc starts to this group.
2012-01-22Make checks for writable directory posix compliantWilliam Hubbs
Reported-by: Maxim Kammerer <mk@de.su> X-Gentoo-Bug: 398931 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=398931
2012-01-13net: allow parameters to a single address configRobin H. Johnson
In the case of a single line of configuration, where the address has parameters, the parameters were being treated as seperate addresses. Eg: config_eth0="4321:0:1:2:3:4:567:89ab/64 nodad home preferred_lft 0" Also document usage of parameters in the net example, and note that multiple addresses on a single line cannot be mixed with parameters. Newlines are required to seperate the addresses. X-Gentoo-Bug: 398827 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=398827 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-01-08net: net.lo, lots of scriptsRobin H. Johnson
The program function in depend blocks is now able to search paths by itself. If passed multiple arguments or multiple calls, at least one of the arguments passed must be a program or a shell builtin (eg ip built into busybox). If a qualified path is specified, only that path will be checked, otherwise it will be checked as a builtin, then $PATH will be checked for the named binary (via type). Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-01-07net.lo: Add the ability to find the full path of a binaryWilliam Hubbs
Some of the networking tools, such as iproute2, can be stored in one of several locations. This function gives us a standard way to find these tools. I would like to thankRobin Johnson <robbat2@gentoo.org> for his input on this function.
2012-01-05cgroups: turn on groups by defaultWilliam Hubbs
The control groups we create are the ones recommended by the linux kernel, so this should be on most of the time if cgroups are enabled in the kernel.
2012-01-05really disable /var/{lock,run} migration to /runWilliam Hubbs
This needs to be disabled until we have tmpfiles.d support. The previous method did not disable it correctly.
2011-12-30Net: do not bring down interfaces during shutdownWilliam Hubbs
2011-12-29disable /run migration until we have /run in baselayoutWilliam Hubbs
2011-12-29cgroups: default the size of the tmpfs to 10 mbWilliam Hubbs
2011-12-27net: use yesno to test up_before_preupWilliam Hubbs
2011-12-26net: Add up_before_preup variable for CAN devicesRobin H. Johnson
Historically, we have tried to up interfaces before running preup, so that the kernel setups up the device and makes things like ethtool work (some hardware cannot be correct probed until then). However this ends up breaking other hardware, so a variable has been introduced to allow the up prior to preup to be disabled: up_before_preup_IFVAR=no X-Gentoo-Bug: 389475 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=389475 Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2011-12-20cgroups: always mount the tmpfs on /sys/fs/cgroupWilliam Hubbs
X-Gentoo-Bug:395079 X-Gentoo-Bug-URL:https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-20add rc_cgroup option to allow disabling of cgroup default setupPiotr Karbowski
Currently, cgroups are still in development, so we are not setting them up by default. However, this default will be changed in the future. This commit message and patch were updated by William Hubbs <williamh@gentoo.org>. X-Gentoo-Bug: 395079 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=395079
2011-12-19cgroups: remove references to the "openrc" cgroupWilliam Hubbs
Openrc will set up cgroups the way the kernel documentation recommends.
2011-12-18cgroups: mount cgroups suggested by the kernel documentationWilliam Hubbs
The linux kernel documentation suggests mounting a separate cgroup hierarchy for each subsystem you want to control/monitor. This changes the cgroups mounting code to do this.
2011-12-12Network: start interfaces after dbusWilliam Hubbs
This is needed to allow auto-connect at boot. Reported-by: David J Cozatt <ygdrasil@comcast.net> X-Gentoo-Bug: 390955 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=390955
2011-12-03Integrate migrate-run into bootmiscWilliam Hubbs
The migrate-run service was hanging when parallel startup was enabled because of its dependencies. This integrates the logic for this service into bootmisc, which will avoid the issues with parallel startup. I would like to thank Robin H. Johnson <robbat2@gentoo.org> for his input on this patch
2011-11-27migrate-run: fix ln calls and migrate directories separatelyWilliam Hubbs
This is based on a patch submitted by AlphatPC@gmail.com. Reported-by: AlphatPC@gmail.com X-Gentoo-Bug: 391945 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=391945
2011-11-26Make migrate-run more verboseWilliam Hubbs
2011-11-26urandom: move seed from /var/run to /var/libMike Frysinger
We want the seed to be preserved across reboots, so move it to /var/lib. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-26fsck: fix typo in fsck mount point supportMike Frysinger
Previous commit e3b39a677b535bc2 missed adding a "[" to one of the tests. Reported-by: Torsten Veller <tove@gentoo.org> x-Gentoo-Bug: 391941 x-Gentoo-Bug-URL: http://bugs.gentoo.org/391941 Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-23net.lo: fix typo in previous math commitMike Frysinger
x-Gentoo-Bug: 391671 x-Gentoo-Bug-URL: http://bugs.gentoo.org/391671 Reported-by: Duncan <1i5t5.duncan@cox.net> Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-23Migrate /var/lock and /var/run to /run for linux systemsWilliam Hubbs
2011-11-22Revert "Revert "fsck: add the ability to specify mount points to check""William Hubbs
This reverts commit 5a3599df8a15b1212857335101c9d31fb19e87e2. After review, I am bringing this back to the tree.
2011-11-20CGroups: create the openrc cgroup hierarchyWilliam Hubbs
Openrc will create a cgroup hierarchy called openrc which will have all services it starts and all subsystems attached to it. If you need other groups/hierarchies, please use libcgroup.
2011-11-19make shell math operations style more succulentMike Frysinger
Convert the style: var=$((${var} + 1)) to: : $(( var += 1 )) The latter is easier to read imo. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-11-18CGroups: /sys/fs/cgroups should be a tmpfsWilliam Hubbs
The kernel documentation states that a cgroup file system should not be mounted here, but a tmpfs. This also means that we should not create a group for each process, but we should allow the user to specify which group a process should be assigned to. The rc_cgroup variable will be used for this purpose. For more information, see /usr/src/linux/Documentation/cgroups/cgroups.txt.
2011-11-16Deprecate the network and staticroute scriptsWilliam Hubbs
These scripts are not supported, and they have several major design issues such as not being able to stop, start or allow a dependency on a single interface.
2011-11-06Revert "fsck: add the ability to specify mount points to check"William Hubbs
This reverts commit e3b39a677b535bc2676a939519906f6b2dbce6f4. I misunderstood and thought this was ready to go in the tree, but it was on a remote branch only for a review.
2011-11-06fsck: add the ability to specify mount points to checkRobin H. Johnson
2011-10-29Use pattern rules instead of suffix rulesWilliam Hubbs
Rework the makefiles to use pattern rules instead of suffix rules. This is the preferred way to write implicit rules according to the gnu make manual.
2011-10-26Add support for automounting configfs and cgroupfsAlexey Shvetsov
Signed-off-by: Alexey Shvetsov <alexxy@gentoo.org>
2011-10-20further clean up OS differences in makefilesMike Frysinger
No need for if() logic. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-18consolodate MakefilesWilliam Hubbs
The tree contained many operating system specific Makefiles which were being included in other Makefiles. This commit removes those and adds the code to the makefiles which included them using make's conditional processing. X-Gentoo-Bug: 387441 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=387441
2011-10-16fix random typosMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-10-02Small style changeWilliam Hubbs
2011-09-27Make dmesg log optionalChristian Ruppert
Reported-by: Patrick <gentoo@feystorm.net> X-Gentoo-Bug: 384485 X-Gentoo-Bug-URL: https://bugs.gentoo.org/384485
2011-09-21Add a new helper functions for _{flatten,get}_arrayChristian Ruppert
A new helper function (_array_helper) since both, the _flatten_array and _get_array function share partially the same code. We also reduce multiple whitespace to a single space, remove leading newlines as well as skipping "empty" lines. This makes the data returned by _{flatten,get}_array much nicer than before. It also fixes bug 366677 where net-tools having trouble with the whitespace mentioned above. iproute2 was not affected. Reported-by: Andrew Maltsev <am@ejelta.com> X-Gentoo-Bug: 366677 X-Gentoo-Bug-URL: https://bugs.gentoo.org/366677
2011-09-18procfs: simplify the binfmt_misc mount checkMike Frysinger
Replace the `mountinfo` exec with a file test of the register file which we rely on later anyways. Signed-off-by: Mike Frysinger <vapier@gentoo.org>