aboutsummaryrefslogtreecommitdiff
path: root/init.d
AgeCommit message (Collapse)Author
2013-02-01sysfs: mount the fusectl file systemWilliam Hubbs
Reported-by: vapier@gentoo.org X-Gentoo-Bug: 453740 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=453740
2013-01-31remove cruft from /run directoryWilliam Hubbs
The /run directory is a mount point for a tmpfs and should not contain any files or directories. This cleans out the /run/openrc symlink and any other files which were incorrectly placed in /run. Thanks to Ian Stakenvicius for pointing out this solution.
2012-12-21net.lo: add ipv6 net and host patternsAlexander Tsoy
X-Gentoo-Bug: 442594 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=442594
2012-12-20net.lo: allow address families to be set on routesMihai Moldovan
X-Gentoo-Bug: 447310 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?d=447310
2012-12-18net.lo: sleep *after* carrier checkMike Frysinger
For devices that are always connected (e.g. ethernet cards), the current carrier always wastes time by sleeping for 1 second. This is because the code sleeps first, then checks for carrier. Invert the order so that we return quickly for devices already active. For devices which are not yet up, there shouldn't be any real difference. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-12-18fsck: simplify skiplist setupMike Frysinger
Use printf rather than a manual for loop. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2012-12-16localmount: quoting fixesSteve L
X-Gentoo-Bug: 446556 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=446556
2012-11-30typo fixesWilliam Hubbs
2012-11-29localmount: only skip unmounting /usr if it was premountedWilliam Hubbs
Add a test when localmount is started to determine if /usr is mounted from inside an initramfs for Linux systems. If it is not, we can unmount it when localmount stops. On *bsd systems, we always unmount /usr if it is separate. Reported-by: ryao@gentoo.org
2012-11-07Whitespace.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-11-06init.d/hostname: Document checkbashism false positive.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-11-06init.d/mtab: Another instance of the same pattern matching case.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-11-06init.d/bootmisc: Another instance of the same pattern matching case.Robin H. Johnson
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-11-06init.d/bootmisc: POSIX XSI shellism.Robin H. Johnson
In a pathname expansion, specifically single-character match, the pure POSIX specification uses '!' as the Negation character where a regular expression would normally be '^'. Regular expression: "a[^a]a" Pathname expansion pattern: "a[!a]a" Reference: IEEE Std 1003.1, 2004 Edition 2. Shell Command Language 2.13 Pattern Matching Notation 2.13.1 Patterns Matching a Single Character > The description of basic regular expression bracket expressions in the > Base Definitions volume of IEEE Std 1003.1-2001, Section 9.3.5, RE > Bracket Expression shall also apply to the pattern bracket expression, > except that the exclamation mark character ( '!' ) shall replace the > circumflex character ( '^' ) in its role in a "non-matching list" in > the regular expression notation. A bracket expression starting with an > unquoted circumflex character produces unspecified results. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-10-31Tmpfiles: create and delete entries once in the boot runlevel.William Hubbs
Initially, we were creating tmpfiles entries in the sysinit runlevel and again in the boot runlevel. Systemd runs the --create and --remove options in one service called systemd-tmpfiles-setup after the local file systems are mounted. Now we have a service called tmpfiles.setup which emulates this. This also closes the bug mentioned below, since we were originally writing to files that were on read-only file systems and that were not available. Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 439012 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439012
2012-10-25netmount: drop need net from dependenciesWilliam Hubbs
Reported-by: <mattsch@gmail.com> X-Gentoo-Bug: 439658 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=439658
2012-10-22oldnet: make the default carrier timeout 0William Hubbs
Some types of interfaces do not have a carrier, so it doesn't make sense to automatically wait for one. Reported-by: <rose@rz.uni-potsdam.de> X-Gentoo-Bug: 438970 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438970
2012-10-19tmfiles: change need dev to use dev.William Hubbs
This is being changed to use for the reason I stated in the previous commit. There is no guarantee that someone is using a device manager.
2012-10-19devfs: Remove references to specific device managersWilliam Hubbs
There were references in the devfs script to mdev, udev and udev-mount. These all provide the virtuals dev and dev-mount; that is how we should refer to them. I believe in the discussion I had with Tony and Robin about this, we were going to change the "use" line to "need". However, after thinking that over, I'm not comfortable doing so because someone could be running a static /dev with no device manager. Reported-by: <tokiclover@gmail.com> X-Gentoo-Bug: 438932 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=438932
2012-10-19Fix bashism in tmpfilesd scriptsWilliam Hubbs
Reported-by: <pesa@gentoo.org>
2012-10-16Oldnet: the loopback interface does not need sysfsWilliam Hubbs
2012-10-16Migrate /var/run and /var/lock to symlinksWilliam Hubbs
Now that we have full support for tmpfiles.d in OpenRC, we can migrate /var/run and /var/lock to symbolic links to /run and /run/lock respectively.
2012-10-16Add Vim modelineChristian Ruppert
2012-10-02sysfs: add -lxc keywordWilliam Hubbs
The sysfs filesystem should not be mounted inside a linux container. Reported-by: permeakra@gmail.com X-Gentoo-Bug: 425790 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=425790
2012-10-02dmesg should not run in a linux containerWilliam Hubbs
reported-by: <Walter@pratyeka.org> X-Gentoo-Bug: 436266 X-Gentoo-Bug: https://bugs.gentoo.org/show_bug.cgi?id=436266
2012-09-26tmpfiles.d init.d scriptsRobin H. Johnson
Now that the tmpfiles.d code is more tested, actually call it from init.d. It assumes that /run is already available when it runs. Please note it runs TWICE. - During sysinit, ideally just after /dev/shm is created, but before udev has started. After udev is also acceptable, but not ideal. - During boot, ideally just after localmount has completed. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26init.d/devfs: Run after (u)dev-mount, before udev/mdevRobin H. Johnson
Using the new dev-mount virtual, with udev-mount included until new udev version is rolled out, we run devfs earlier now, before udev/mdev. It only needs (u)dev-mount before it, so that /dev is mounted. This opens the way for tmpfiles.d, which needs to be sandwiched in the middle. Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
2012-09-26Add -lxc keyword to urandom scriptWilliam Hubbs
Urandom should not run in lxc containers since it is provided by the host. Reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 436270 X-Gentoo-Bug-URL: http://bugs.gentoo.org/436270
2012-09-15netmount: do not handle NFS mountsWilliam Hubbs
Since nfs and nfs4 file systems require extra daemons to be running on the client to function properly, netmount should not try to handle these file systems. Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 427996 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
2012-09-10netmount: add checks for rpc.idmapd for nfs4 filesystemsWilliam Hubbs
Reported-by: <devurandom@gmx.net> X-Gentoo-Bug: 427996 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=427996
2012-09-09dmesg: add -prefix keywordWilliam Hubbs
Dmesg should not run on prefix systems. Reported-by: <heroxbd@gentoo.org>
2012-09-07savecache: make sure $RC_LIBEXECDIR is writableWilliam Hubbs
This is needed in case of a read-only root filesystem such as a diskless client. Reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 430382 X-Gentoo-Bug-URL: http://bugs.gentoo.org/show_bug.cgi?id=430382
2012-08-25do not provide a virtual for the loopbackWilliam Hubbs
The loopback interface is active on all systems, so there is no need to provide a virtual for it.
2012-08-24newnet: provide net if configuring more than the loopback interfaceWilliam Hubbs
2012-08-18Use do_umount's return value instead of eoutdent's.Christian Ruppert
2012-08-17swapfiles: make sure /proc/swaps existsWilliam Hubbs
If CONFIG_SWAP is turned off in the kernel, this file may not exist. In that case, we should not try to read from it. reported-by: <walter@pratyeka.org> X-Gentoo-Bug: 430378 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=430378
2012-07-26Bring Back prefix supportWilliam Hubbs
We now have a team member who is interested in OpenRC on prefix, so I am bringing it back to the main tree.
2012-07-15remove unnecessary header lineWilliam Hubbs
2012-07-15small style changes to encswapWilliam Hubbs
This drops some unnecessary continue statements and changes command command substitution to use $() instead of ``.
2012-07-15Fix savecore init script to execute after dumpon, but before encswapRichard Yao
This ensures that any kernel crash dumps are available when savecore runs. It also prevents encswap from corrupting them.
2012-07-15Import encswap init script from FreeBSDRichard Yao
The FreeBSD encswap init script has been adapted to function in OpenRC. It should function identically to its FreeBSD counterpart.
2012-07-10fix the upstream default network stackWilliam Hubbs
The OpenRC upstream default network stack was changed, but there was no reason to change it. Now since we have the MKNET build switch, it is easy for the gentoo ebuild to install oldnet by default. The upstream default is newnet.
2012-07-10add the MKNET variable to select a network stackWilliam Hubbs
The MKNET variable can be used to select the network stack you want to build and install with OpenRC. The current default is the gentoo "oldnet" stack. If you want to install the OpenRC newnet stack, use MKNET=newnet on the make command line.
2012-07-08Revert "Deprecate the network and staticroute scripts"William Hubbs
This reverts commit 5994e55937cbbb71b1c22ad829b77a1bcd8c3793. There are situations where these scripts can be useful, so I am bringing them back. Also, I want to start discussions about simplifying the OpenRC network stack.
2012-07-03cgroups: allow users to turn off creation of controller cgroupsWilliam Hubbs
This adds a switch to not create the one-cgroup-per-controller setup of cgroups. reported-by: davidweb@klaftenegger.de X-Gentoo-Bug: 423317 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=423317
2012-05-27termencoding should not run on lxcWilliam Hubbs
reported-by: Alexey Shvetsov <alexxy@gentoo.org>
2012-05-13do not umount /usr on linux systemsWilliam Hubbs
We can't really umount /usr on linux systems because /usr is a special case if it is a separate filesystem which is handled by an initramfs. reported-by: tamiko+GENTOO@kyomu.43-1.org X-Gentoo-Bug: 415523 X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=415523
2012-05-02Do not try to remount /run read onlyAlexey Shvetsov
On a diskless system, doing this causes the system to lock up during shutdown.
2012-04-16init.d/procfs: posix compatibility fixSergei Trofimovich
I've noticed in at boot: # /etc/init.d/procfs restart procfs | * WARNING: you are stopping a boot service procfs |[: 308: unexpected operator Which calls $ /bin/dash -c '[ "$RC_SYS" == "OPENVZ" ] && echo "ovz" || echo "nope"' [: 1: unexpected operator nope Fixed by using '='. X-Gentoo-Bug: 412237 x-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=412237
2012-04-03network scripts need sysfs on linux systemsWilliam Hubbs
Adjust the previous commit so that on linux systems the network scripts need sysfs.
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 05:38:28 +0000